turbo water lines [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: turbo water lines


cpeed
04-03-2001, 04:17 PM
Is there any reason why I wouldnt want to re-use the water lines for my turbo. Its a 97 GSX. Do I need to bend them when I take them out or anything? I know I need 4 new crush washers for them. My other question is do I need new crush washers for a stainless steel feed line from RRE.

Viprklr
04-04-2001, 02:31 AM
You can reuse the water lines no problem. You should replace the crush washers including the feed line but you don't always have to.
I'm not sure on a 2G but on a 1G there was no bending of water lines required to remove the turbo. I doubt it'd be different for yours.

eagletalonawd
04-06-2001, 02:52 AM
Check out the VFAQ on this.
http://www.vfaq.com/mods/2G-16G.html It tells you what you have to do with the water lines.