Dummy instructions [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: Dummy instructions


Geovannie
04-07-2001, 03:10 PM
ok guys, i just bought a greddy type s bov i had stock 1g with my buschur upper i/c pipe. Now how do i put htat bov on my car, the flange is different do i have to get a enw flange or is there a easier way?

Endless
04-07-2001, 06:24 PM
I thought the Type S would fit the 1G flange.........I could be wrong

Boostaholic
04-12-2001, 02:54 PM
I havent seen the 1g flange on the intercooler piping but if the hole isnt too big drill 2 more holes that will fit the type s. I know its smaller than the 1g though, my problem was backwards. I bought a intercooler pipe fit with the greddy type s flange and then for my turboxs bov it had a 1g flange so i drilled 2 holes in it to make it fit. Use the gasket for measurments.