Clutch line problem?

[sparkboy33]

I just got a 95 talon tsi, drove it fine for a week and now the clutch is messing up on me. the problems are that I can push the clutch in and get into gear, but as soon as I stop or slow down, I can put the clutch in, and I can't get into any gear and the clutch has very light pressure. but then I take my foot off of the clutch and back on and it will work. I took the cap off of the clutch fluid reservoir and pumped the clutch and the fluid stayed in the same place. Please gimme a few things to check out.

-Paul-

[sparkboy33]

Well...if anyone ever has that problem, it is most likely because the clutch needs to be bled. I was driving and downshifting into 2nd and the clutch went to the floor but I was able to pull it back up and it was working again, but I just bled the clutch and it seems to be back in order.

-Paul-

[Super4x4Duty]

If you didn't open the system recently you probably have a failing clutch master or slave. Look at the back side of the clutch master for fluid running down your firewall (under the dash) and the rubber boot where the rod runs out of the slave. Hope that helps.