Your source for genuine OEM Mitsu parts

[greenstreak]

Some of you may have noticed my "supporting vendor" tag under my username these past few days. I am the new head of parts for JNZ Tuning and will be handling all of the retail sales.

We sell nothing but OEM Mitsu parts. No OEM Spec or OEM "like" parts. Just the good stuff at 25% discount over the dealer.

Josh Jones aka DSSA is the guy who brought the DSM crowd the club discount through Conicelli Mitsubishi years ago and he is the guy I work for. We are providing the same service that he did through Conicelli for years but with some added bonuses.

In addition to OEM replacement parts for any Mitsubishi we all carry a handful of aftermarket parts and will be expanding shortly. We are direct with Turbonetics and can supply both Garret and Mitsu turbo at very competitive prices. Coming soon will be products from ACT and Fidanza. Stay tuned.

If you need quotes on timing belt packages or parts, balance shaft elim kits, or even just small odds and ends like door mouldings feel free to PM me or post to this forum and I will get right back to you.

[dsm6yrs]

How much for the timing belt kit? I don't have balance shafts, but, since I have never changed the timing belt, I don't know if I need any of the balance shaft related components (balance pulley, etc.) - do I just need the Timing belt, hydrolic tensioner, timing pulley, and idler pully?

How much for a new water pump with gasket and o-ring?

Thanks for your help!

[greenstreak]

How much for the timing belt kit? I don't have balance shafts, but, since I have never changed the timing belt, I don't know if I need any of the balance shaft related components (balance pulley, etc.) - do I just need the Timing belt, hydrolic tensioner, timing pulley, and idler pully?

How much for a new water pump with gasket and o-ring?

Thanks for your help!
http://www.dsmtalk.com/forums/showthread.php?t=136759 ;)

[tonymitss5]

Some of you may have noticed my "supporting vendor" tag under my username these past few days. I am the new head of parts for JNZ Tuning and will be handling all of the retail sales.

We sell nothing but OEM Mitsu parts. No OEM Spec or OEM "like" parts. Just the good stuff at 25% discount over the dealer.

Josh Jones aka DSSA is the guy who brought the DSM crowd the club discount through Conicelli Mitsubishi years ago and he is the guy I work for. We are providing the same service that he did through Conicelli for years but with some added bonuses.

In addition to OEM replacement parts for any Mitsubishi we all carry a handful of aftermarket parts and will be expanding shortly. We are direct with Turbonetics and can supply both Garret and Mitsu turbo at very competitive prices. Coming soon will be products from ACT and Fidanza. Stay tuned.

If you need quotes on timing belt packages or parts, balance shaft elim kits, or even just small odds and ends like door mouldings feel free to PM me or post to this forum and I will get right back to you.

What about a 2gb Front Bumper shipped to 14526.

[smitty1gbishi]

hey i was looking on the jnz web site and i would like to know how much the EVO Manifold Kit 2 cost and if you guys do porting and if you guys could tap it for a egt

(PMed a quote to you -Greenstreak)

[boosteddevil]

hey how much would a head gasket run me, shipped to 49428 jenison michigan, thanks
oh btw, its for a 2g 7 bolt 4g63t





(Quote sent through PM-Greenstreak)

[greenstreak]

What about a 2gb Front Bumper shipped to 14526.

For future reference since this is a common swap the 97+ Eclipse bumper costs $254.09 through us. Saving you roughly $80 over buying one right from Mitsu.

[4G63 POWER]

now i have bought parts from jnz in the past & his pricing was always the lowest around. can we expect the same price structure ?
i swear it seemed like he was selling stuff @ cost.

[greenstreak]

Yep, exact same price structure as www.partznet.com/conicelli.

[4SFED4]

I need the lower iblack window trim for both doors and rear 1/4 glass trim for both sides for a 1G.
I am also in need of new bumpstops on all 4 corners for a 1G AWD.

[MidnightViper]

hey how much would a head gasket run me, shipped to 49428 jenison michigan, thanks
oh btw, its for a 2g 7 bolt 4g63t





(Quote sent through PM-Greenstreak)


You'd be much better off just going to O'reillys and ordering a metal head gasket through them for cheap.

[greenstreak]

I need the lower iblack window trim for both doors and rear 1/4 glass trim for both sides for a 1G.
I am also in need of new bumpstops on all 4 corners for a 1G AWD.

Quarter window molding is $16.56 each.
Door window molding is $13.13 each.

[4SFED4]

Quarter window molding is $16.56 each.
Door window molding is $13.13 each.

Great deal.
Please PM me back with contact info and payment methods.

[joshua44a]

how much is o2 sensor for 95 tsi after the cat.?

[greenstreak]

how much is o2 sensor for 95 tsi after the cat.?

$92.40 plus shipping.

[joshua44a]

Do I really need it? I have a test pipe on the exhaust and I heard if you put an o2 sensor in the cel will come on.

[greenstreak]

In short, no. There are ways to get rid of the CEL. Search around. :)

[greenstreak]

You'd be much better off just going to O'reillys and ordering a metal head gasket through them for cheap.


Sure, you can save a few bucks by going to Oreillys but you are getting a felpro gasket. There is a reason that the gaskets are called "FelBlow". Mod cheap, mod twice.

[dosojingsx]

how much could you get a 98 GSX engine wiring harness for?

[JNZTuning]

how much could you get a 98 GSX engine wiring harness for?


Would need a VIN # for this. Most items, I have no need for a VIN #, just model/year, and sometimes production date. However, the wiring harnesses change not only by model/year/pro date, but by options.

Shoot Erik (GreenStreak) a PM with your VIN, and he'll gladly give you a price.

Thanks.

[Tenacious-B]

What is the cost for a front airbag sensor on a '97 GSX?

[JNZTuning]

Price on the front airbag sensor is $76.67.

[DrewJ]

cost on 6-bolt OEM oil case/pump + gears?

thx

[JNZTuning]

cost on 6-bolt OEM oil case/pump + gears?

thx


Front Cover is $158.24
Drive Gear:$39.23
Driven Gear:$19.82
O-ring for Star Plug:$1.30

Thanks!

[Mad tiger]

difference in steel and standard head gaskets?

[cbilmer]

I must say that these guys have some great prices... and very good service.

I have just recently ordered a few parts from them. (Knock sensor, speed sensor, bolts etc) Prices were very good and parts all arrived neatly packed and secure.

Thanks again Erik. I'll definately be dealing with JZTuning again in the future.

Chris.

[greenstreak]

difference in steel and standard head gaskets?
Regular is a composite material gasket and the metal is a multi layer metal gasket.

[spdjnky]

Price for a crank pulley for '99 eclipse gs?

If you need vin # or anything pm me.

[greenstreak]

I won't need a VIN but unfortunately I won't be able to give you the price until I go back in on Monday. I usually can get online from work but today was really hectic.

[nukefission]

Figured I should chime in here on JNZ's great service. I called to order some tie rods ends on a Wednesday EVENING, and they arrived the following afternoon. :eek:

Thanks Erik. :)

[greenstreak]

Booyah! ;)

Gotta keep my DSMTalk buddies happy. :)

[spdjnky]

I won't need a VIN but unfortunately I won't be able to give you the price until I go back in on Monday. I usually can get online from work but today was really hectic.

I would still like a price on the crank pulley.

[JNZ Tuning]

Price for a crank pulley for '99 eclipse gs?

If you need vin # or anything pm me.

Sorry, it has been a hectic morning so far.

Price on that crank pulley is $91.50.

:cool:

[spdjnky]

pm sent

thanks

[knewblewkorvett]

Your source for genuine OEM Mitsu parts

so does that make you Satan's cousin? :P

I'm sure I'll be ordering from you sometime in the future :)

[Jeff91AWD]

Looking for a new radiator, I was curious to see Mitsu's price before i went aftermarket hokey style. I figure the one in the car has lasted 168k, so if another new one takes me to 336k, i will certainly be happy. :)

'91 Talon Tsi AWD 5sp

Thanks,
Jeff

[4G63 POWER]

oe is denso.

[greenstreak]

I'll get you a price in about an hour. ;)

[greenstreak]

Looking for a new radiator, I was curious to see Mitsu's price before i went aftermarket hokey style. I figure the one in the car has lasted 168k, so if another new one takes me to 336k, i will certainly be happy. :)

'91 Talon Tsi AWD 5sp

Thanks,
Jeff


$250.22 for an OEM replacement. :)

[RevivedDSM]

Drivers Side front fender price please

Thanks
RevivedDSM

[greenstreak]

For what car? I looked at your profile but it isn't listed.

[RevivedDSM]

Sorry duh,

2G Eclipse (white if poss.)

Thanks
RevivedDSM

[SaEng4G63]

97-99 Mitsubishi Eclipse OEM side skirts both sides and how much?

[turbolover]

I've recently ordered carpet and an evo3 turbo from jnz tuning and I just wanted to add that they were extra fast and very easy to work with! I will also be doing more business with them in the future!!
btw, shout out to Erik for all the help. :D

[Mr96GSX408]

the UK evo ix badge!
http://img383.imageshack.us/img383/4715/evolutionixtrunkbadge6kn.jpg

i don't even know if it's possible.. but in black if possible? :)

[79zeph]

How much for an upper engine gasket kit, timing belt kit, exhaust manifold studs, turbo bolts/studs, and all the copper washers for the banjo bolts if their not included in the uegk

Thanks

[greenstreak]

I will be back in about an hour with your price quotes guys. :)

[greenstreak]

Drivers Side front fender price please

Thanks
RevivedDSM

$184.93 plus shipping on the fender. It doesn't say what color it is so assume you will need to prime and paint it when it comes in.

[greenstreak]

97-99 Mitsubishi Eclipse OEM side skirts both sides and how much?

OK, this is for the three pieces that you need to do the job on one side so double the price at the end for both sides or remove anything that you don't need.

Driver's side sideskirt $112.07
Driver's side door cap $56.25
Driver's side sideskirt cap (little cap just behind the front wheels. $37.45

All need to be painted.

[greenstreak]

I'll call Mitsu ASAP and see if that is something I can get my hands on.

the UK evo ix badge!
http://img383.imageshack.us/img383/4715/evolutionixtrunkbadge6kn.jpg

i don't even know if it's possible.. but in black if possible? :)

[greenstreak]

How much for an upper engine gasket kit, timing belt kit, exhaust manifold studs, turbo bolts/studs, and all the copper washers for the banjo bolts if their not included in the uegk

Thanks

Full engine gasket kit $175.76
Timing belt kit can be found here for quick references: http://www.dsmtalk.com/forums/showthread.php?t=136759
1G
-Timing Belt $56.98
-Balance shaft belt $21.77
-Balance shaft belt tensioner $21.92
-Timing belt tensioner $65.59
-Idler pulley $21.17
-Tensioner pulley $26.39

Stock manifold studs $8.30 for 9
SS manifold studs $16.67 for 9

The gasket kit comes with all of the crush washers. :)

[Juicy47]

How much for a set of 97+ eclipse headlights?

Do you ship to Canada?

[greenstreak]

Yes, we can ship to Canada.

Headlights are $258.19 ea.

[xem1x]

How much for a flywheel check plate? My CAPS says the P/N is MD095656?? I need it for a 1992 6bolt.

[Juicy47]

how much for MR221612 and MR221611 shipped to Toronto, Ontario?

[JNZTuning]

How much for a flywheel check plate? My CAPS says the P/N is MD095656?? I need it for a 1992 6bolt.


It's cheap.

Cheap to the point of you might wanting to get it at your local dealer to avoid shipping charges (Like $5).

Josh

www.jnztuning.com
215-997-6850

[JNZTuning]

how much for MR221612 and MR221611 shipped to Toronto, Ontario?

MR221612: $7.58
MR221611: $7.58

Shipping to Canada is gonna kill you though.

Josh

www.jnztuning.com
215-997-6850

[treebonker]

are the 3rd gen revised lifters offered? price

thanks

[greenstreak]

At this time we don't sell the revised lifters. Sorry.

[Maverick31]

Can you get me a 93 A/T alternator?
Thanks.

[JNZTuning]

At this time we don't sell the revised lifters. Sorry.


Actually, Erik is right and wrong.

We sell them, just not at a price worth quoting.


While the Topline units reportedly measure up at full extension *slightly* (we're talk thousandths of an inch) less than the actual OEM ones, the price isn't even comparative. While I used to be able to sell them @ 11.00/each, now *OUR* price is around $23-$24 a pop. Go Mitsu. :(

Josh

[spdjnky]

'99 Eclipse Gs

Price on a CLutch master cylinder and slave cylinder shipped to 40342...and can you get it to me before Friday?

Mine is leaking inside the car and I guess I need to replace both from what I've read on here?

[spdjnky]

'99 Eclipse Gs

Price on a CLutch master cylinder and slave cylinder shipped to 40342...and can you get it to me before Friday?

Mine is leaking inside the car and I guess I need to replace both from what I've read on here?

Okay I just need the price on the clutch master cylinder shipped....

Thanks

[griffsfsr]

I am looking for a price on a speed gear for a 95 GST. Thank you.

[greenstreak]

I will get back to you both today with prices. If it is ever urgent you can always call me at work. The number is listed on the site. I try to get online here during the day but it is not always possible when it is busy.....and it has been very busy lately. :)

[spdjnky]

Thanks Greenstreak but I no longer need a price. Got a rebuild kit and I am going to try my hand at that first.

[greenstreak]

Master cylinder is $77.12.
Slave cylinder is $76.20.

I would inspect both for signs of leakage before you order. Just to be sure.
'99 Eclipse Gs

Price on a CLutch master cylinder and slave cylinder shipped to 40342...and can you get it to me before Friday?

Mine is leaking inside the car and I guess I need to replace both from what I've read on here?

[greenstreak]

It is there for future reference then. :D
Thanks Greenstreak but I no longer need a price. Got a rebuild kit and I am going to try my hand at that first.

[greenstreak]

Speedo driven gear $8.99


I am looking for a price on a speed gear for a 95 GST. Thank you.

[Gleason]

How much for a 7bolt 2g Mitsu metal headgasket?

[JNZTuning]

How much for a 7bolt 2g Mitsu metal headgasket?

$72.31. 90-99 4G63s all use the same headgasket.

Thanks!

[Gleason]

$72.31. 90-99 4G63s all use the same headgasket.

Thanks!

wow, good price. I should be buying this after I get all my Christmas purchases out of the way.

[1QuickChic]

hey greenstreak, how much for an oem heater core for 90-94 eclipse's, i got one from autohoes, and its already leaking again :(

[greenstreak]

Shoot, I just priced one out on Friday but I forget the amount that it came too. I'll get back to you when we reopen on Tues.

[1QuickChic]

thanks man i apreciate it

[griffsfsr]

Just looking for a few things so that I can get my build underway.

14b O2 housing gasket
'94 Turbo oil return line gasket
'94 Turbo oil feed line
1G TB Gasket (Manifold Side)
1G TB Gasket (Piping Side) not sure if they are the same or not
'95 Hatch Gas Struts
'95 Exhaust Manifold Gasket (Head to Manifold)

[greenstreak]

[QUOTE=griffsfsr]Just looking for a few things so that I can get my build underway.

14b O2 housing gasket $3.68
'94 Turbo oil return line gasket $.86 ea
'94 Turbo oil feed line $47.69
1G TB Gasket (Manifold Side) $2.47
1G TB Gasket $2.09
'95 Hatch Gas Struts $20.40 each.
'95 Exhaust Manifold Gasket $13.18 (for the 4 layer one.)

[knewblewkorvett]

I need hatch gas struts for both my 92 TsiAWD and the 91 TsiAWD. How much for all 4 shipped to 52404? Do you carry most interior parts such as trim around the dash?
Also, do you accept PayPal?

[greenstreak]

At this time we do not accept paypal. Only credit cards.

Yes, we can get pretty much any interior piece. I will look everything up for you guys tomorrow from work and get back to this thread.

[Wreckless]

What are your prices for a 95 gst
lifters
exhaust manifold

[JNZTuning]

What are your prices for a 95 gst
lifters
exhaust manifold


We don't stock the lifters, as they're $25+ a piece through Mitsubishi.

The 95 Manifolds are: $162.18, or you can go Evo III Manifold for $10 more.

[dnhieu]

i dont think you can get this but how much for a wiring harness with all the engine bay plugs? its for a 94 eagle talon tsi awd.

thanks
david

[V8s_are_slow]

i dont think you can get this but how much for a wiring harness with all the engine bay plugs? its for a 94 eagle talon tsi awd.

thanks
david

He's asking for my car and yeah I need this. The one that goes to all the injectors, water temp sensors, etc. I just got the other harness from the dealer but it wasn't the one I was wanting. Doing a pretty big build up on my car and don't want crappy brittle wires for this build up. Dealer said they don't make it anymore. Stupid if ya ask me since they make the other engine harness for the car. Morons! Thanks!

Scott

[GotBoost?]

im looking for a first gen turbo water return line
and a 97to 99 front bumper and headlights

[greenstreak]

The gas struts are $21.17 each so 4 would run you $84.66. Shipping to IA will be about $10 so figure $95 total.


-
I need hatch gas struts for both my 92 TsiAWD and the 91 TsiAWD. How much for all 4 shipped to 52404? Do you carry most interior parts such as trim around the dash?
Also, do you accept PayPal?

[greenstreak]

I just called it in an it is indeed no longer available through Mitsubishi. :(
He's asking for my car and yeah I need this. The one that goes to all the injectors, water temp sensors, etc. I just got the other harness from the dealer but it wasn't the one I was wanting. Doing a pretty big build up on my car and don't want crappy brittle wires for this build up. Dealer said they don't make it anymore. Stupid if ya ask me since they make the other engine harness for the car. Morons! Thanks!

Scott

[greenstreak]

Water lines are $11.21 for the block side and $11.76 for the outside line.

2G headlights are $258 each.
2G 97+ front bumper is $254.09.
im looking for a first gen turbo water return line
and a 97to 99 front bumper and headlights

[V8s_are_slow]

I just called it in an it is indeed no longer available through Mitsubishi. :(

Mitsubishi is freakin retarded. They still make the harness that goes to the horn, alternator, lights, etc. The one ya hardly ever touch. And the other harness that you'd mess with way more often such as the one's that goes to the injectors, water temp sensors, etc. etc. etc. they decide to stop making. :mad: Wonder who the f**ktard is who made the decision to stop making that item but continue with the other harness? :rolleyes:

[JNZTuning]

Mitsubishi is freakin retarded. They still make the harness that goes to the horn, alternator, lights, etc. The one ya hardly ever touch. And the other harness that you'd mess with way more often such as the one's that goes to the injectors, water temp sensors, etc. etc. etc. they decide to stop making. :mad: Wonder who the f**ktard is who made the decision to stop making that item but continue with the other harness? :rolleyes:


It's not that they stopped making one and continue to make the other, it's just what they have left from their initial order from the manufacturer.

You might be able to utilize another model year's harness, but you would have to keep in mind certain options that came on your car that you'll still be utilizing, such as CA Emissions or not, ABS, etc.

[1QuickChic]

heater core??

[ParadoxMessiah]

Greenstreak, you have been pm'ed with a list. Need parts ASAP. Thanks.

Returned. Operators are standing by. ;)

[V8s_are_slow]

It's not that they stopped making one and continue to make the other, it's just what they have left from their initial order from the manufacturer.

You might be able to utilize another model year's harness, but you would have to keep in mind certain options that came on your car that you'll still be utilizing, such as CA Emissions or not, ABS, etc.

Wonder what one would have to do to get them to wanna make this item again. If that's even possible...along with other discontinued items. I use to own an 84 300ZX and there's company's that specialize in all the factory parts, down to lil nuts and bolts. With this car, I can find aftermarket parts all day long. When it comes to replacement factory parts, I'm pulling my hair out trying to find all the discontinued parts (like my drivers side door panel for example for awd models with power windows and the tan leather on the side).

[greenstreak]

heater core??

I'm sorry, I must have overlooked your request by accident. The price on the heater core is $234.35.

[1QuickChic]

:eek: wow that is high, i think im gonna try a salvage or oreiily again :eek:

[treebonker]

I'm looking for 1g timing parts for a 6bolt swap in my 2g and a million other parts.

I've been going through the parts catalog and noticed there was an idler_pulley_bolt specifically for the '90 yr model. Why is this ?

Thanks
-treebonker

P.S Is a secure site setup for taking CC orders?

[JNZTuning]

I'm looking for 1g timing parts for a 6bolt swap in my 2g and a million other parts.

I've been going through the parts catalog and noticed there was an idler_pulley_bolt specifically for the '90 yr model. Why is this ?

Thanks
-treebonker

P.S Is a secure site setup for taking CC orders?

The online catalog is secure.

As for the bolt, it's listed for the 90's only, since they originally came with a different idler pulley. The bolt listed is what is needed to adapt to the idler pulley that is now available.

It's a one shot deal, once you have the $2 bolt, you don't have to buy one again later.

[treebonker]

Then would there be a '90 specific idler pulley (or is it that the the 90's came with a different idler pulley and bolt from the FACTORY and you need that new bolt to use the universal idler pulley?
I'm confused now as to which I need to use in my application. :P

Thanks
-treebonker

[greenstreak]

The 90 specific pulley is no longer available so you have to use the 91+ with the newer bolt.

[treebonker]

Okay. Thanks alot.
The looong list of parts are almost finalized. : )

-treebonker

[Tenacious-B]

Can you get the black fuel/temperature and boost/oil pressure gauge overlays for a 97? If so, how much are they?

[Grifter]

speed sensor for a 99 Eclispe RS Auto?
(if speed sensor is the wrong term, the sensor that controls the speedo..)

[greenstreak]

A vehicle speed sensor for that car is $98.25.

[Tenacious-B]

You didn't ignore my question did you? :cool:

[greenstreak]

Can you get the black fuel/temperature and boost/oil pressure gauge overlays for a 97? If so, how much are they?

I didn't forget. :)

It was my understanding that only the 1999 Eclipse had the white face gauges. Do you have white faces in your 1997?

[JNZTuning]

Just as a note, Erik will be down in Daytona from today until next Tuesday enjoying his Christmas Bonus, and getting a little much-deserved R&R.

I'll try to check up on here as often as possible, but please bear with us until he returns.

Thanks!

[Tenacious-B]

I didn't forget. :)

It was my understanding that only the 1999 Eclipse had the white face gauges. Do you have white faces in your 1997?

Well, sort of. The previous owner decided it would be cool to slap some totally ghetto-fabulous ebay style indiglo gauge faces on the cluster. I was happy to find that he just put the white faces over the black ones for the speedo and tach, but I wasn't so lucky on the other two. I'd prefer to have them all black as all my other gauges are black as well.

[92LaserRSturbo]

how about a 6bolt flywheel for a fwd Turbo?

[greenstreak]

how about a 6bolt flywheel for a fwd Turbo?


Rediculously priced through Mitsu @ $208.26. For slightly more, we can do an ACT unit.

If you're interested in going that route, please give us a call.

Thanks!

[Tenacious-B]

Waits patiently for an answer :cool:

[greenstreak]

Well, sort of. The previous owner decided it would be cool to slap some totally ghetto-fabulous ebay style indiglo gauge faces on the cluster. I was happy to find that he just put the white faces over the black ones for the speedo and tach, but I wasn't so lucky on the other two. I'd prefer to have them all black as all my other gauges are black as well.

I gotcha. :)
It doesn't look like they sell the gauge faces separately. :( I can get the whole meter with the face but each corner comes out to $59. Perhaps some black, stock looking gauge overlays?

[Tenacious-B]

I was afraid that would be the case. Thanks for checking though.

[joemoto]

hi i need knock sensor 96 gsx

[kanda98]

How about a 95 o2 sensor?

[BOOSTERchair]

how much for a 1g slave cylinder? fwd turbo...thanks

chris

[gst_a_girl]

How much for a 2G (1995) TPS sensor?





Thanks!
Kim

[JNZTuning]

I'll play "catch up" here:

2G TPS Sensor: $111.20

1G FWD Slave Cylinder: $49.41

2G Front 02 Sensor: $97.49

2G Knock Sensor: $54.85

Thanks!

-Josh

P.S., I've quoted pricing on 2G Turbo stuff in the above list as the car's model wasn't listed. Please indicate what "model" car you're looking for parts for: I.E., 2G GSX/GST/GS as it makes a big difference.

[GST_CSF]

hello how much for a driver side motor mount for a 95 gsx. thanks

[greenstreak]

hello how much for a driver side motor mount for a 95 gsx. thanks

$34.15 will be the amount for the motor mount.

[evoX3]

Hi,can you supply steel shift forks for W5M33 trans and slip yoke recall kit.
I am in Australia,is this a problem?Also need many other products.Would you have a catalog that you can mail to me?
Thanks,Brett.

[4cefedGST]

How much for a stock 03 evo apex silver carbon fiber wing and trunk? And does it come painted? Thanks.

[akp639]

Hi, How much would a tbelt, 6 bolt oil or frount cover gasket whatever it is, and the balace shaft eliminator parts cost. I know this wasent an option earlier but do you guys except pay pal yet, if not what other payment options are there. Thanks~Andrew

[empty01]

Hey guys don't mean to pester, I already sent Erik a PM but I figure he's probably pretty busy so hasn't had a chance to get back to me yet. I need an ISC for a 95 GS-T. Don't really care too much about the price just need to get it out ASAP. If someone could get back to me on where/how to order I would appreciate it.

Thanks,
Ian

[Otaking]

I'm going to assume it's fastest to just give them a call.

Phone Number: (215) 997-6850

http://www.jnztuning.com

[greenstreak]

You are not pestering. We have been very busy lately and I didn't get a chance to get online at all since Sunday afternoon.

The ISC runs right around $200 new. I will PM you with an exact price today when I get in.


Hey guys don't mean to pester, I already sent Erik a PM but I figure he's probably pretty busy so hasn't had a chance to get back to me yet. I need an ISC for a 95 GS-T. Don't really care too much about the price just need to get it out ASAP. If someone could get back to me on where/how to order I would appreciate it.

Thanks,
Ian

[greenstreak]

Only because I won't have time right away to get back to some of you....

Most of the requests asked about above are listed on our website so if it is time sensative just click over to www.jnztuning.com/catalog and look around. :) All of the timing belt parts are there as well as the balance shaft removal kits, and lots lots more.

[greenstreak]

How much for a stock 03 evo apex silver carbon fiber wing and trunk? And does it come painted? Thanks.

The rear deck lid is $253.35 and the rear spoiler is about $1350.74. I might be able to get it closer to $1100 if you are really interested.

[greenstreak]

Hi, How much would a tbelt, 6 bolt oil or frount cover gasket whatever it is, and the balace shaft eliminator parts cost. I know this wasent an option earlier but do you guys except pay pal yet, if not what other payment options are there. Thanks~Andrew

Front case gasket is $7.24
B-shaft elim kit is $66.12 but includes the above gasket with that price.


We are working right now on setting up a paypal account. Should be up and running this week sometime.

[greenstreak]

Hey guys don't mean to pester, I already sent Erik a PM but I figure he's probably pretty busy so hasn't had a chance to get back to me yet. I need an ISC for a 95 GS-T. Don't really care too much about the price just need to get it out ASAP. If someone could get back to me on where/how to order I would appreciate it.

Thanks,
Ian

$206.51. Pretty close to my guess. :) You can call me at JNZ Tuning to place your order or you can always order online at www.jnztuning.com/catalog or you can PM me to do it right here.

[BigBoostDSM]

Could you PM me with a price on a Knock sensor for a 91 GSX. Thanks!

[JNZTuning]

Could you PM me with a price on a Knock sensor for a 91 GSX. Thanks!


http://www.jnztuning.com/catalog/product_info.php?products_id=103

[BigBoostDSM]

Thank you sir.

[9blktalon2]

Well I broke an ABS line last night, it's the one that connects to the shift line. Can you get that, and if so...how much? I need this BAD..and ASAP...thanks

Brandon

[greenstreak]

I hate to say it but you lost me. What shift line?

[1QuickChic]

hey green what kind of payments you take?, i need a metal hg, and an exhaust manifold gasket, as well as crush nuts for the exhaust bolts, can you guys do cod?

[greenstreak]

No, at this time we only take payments via credit card. Visa, Mastercard, and Discover. All of those parts are in stock though.

[kanda98]

Greenstreak,

Im looking for a 2g non cruise throttle cable...I only see a 1g on the site.

Could you tell me if you have it and how much shipped? Also, do you ship out on Saturdays before a specific time?


Kevin

[1QuickChic]

No, at this time we only take payments via credit card. Visa, Mastercard, and Discover. All of those parts are in stock though.

ok can you pm me a price on all those pluss shipping to 74403 , and i will go get me a prepaid cc, thanks green

[greenstreak]

We are not in the shop on Sat. Sorry. :)

1quickchik: I will get back to you asap on Monday with your total price.

Kevin: We do have 2G non cruise cables as well. They were on sale last week and I just took them off of the specials page. I got sidetracked before moving them back to their normal spot. I will get you a price Monday as well on it.

[kanda98]

Okay,

just hit me up when you get a chance.

[greenstreak]

The on cruise throttle cables are $33.13 and will be going back up on the site today. :)

[V8s_are_slow]

Manual Rack & Pinion? Incase I decide to go with one in my car and if I have problems trying to find one around town. 1st gen.

[badboy93tsi]

Manual Rack & Pinion? Incase I decide to go with one in my car and if I have problems trying to find one around town. 1st gen.


Reserve me one too! AC and PS must go!

[QuasiMondo]

Do you sell valve seals seperate from the engine gasket sets?

[greenstreak]

We sure do. $49.44 for the set of 16.

[4cefedGST]

The rear deck lid is $253.35 and the rear spoiler is about $1350.74. I might be able to get it closer to $1100 if you are really interested.

If it comes painted in Apex Silver I will buy it.

[greenstreak]

I know it had color options listed but I don't want to assume anything. I will check on the prepainting and also on the racks for those above on Monday.

[1QuickChic]

hey just curious, how do you ship green? i placed my order last night via the website, and am curious who is bringing it, and when to expect it.

[greenstreak]

We ship out via DHL. If you placed your order last night I will process it first thing in the AM on Monday. :) I will send you a tracking number to your email when it goes out.

[1QuickChic]

thanks again

[nas82]

Hey greenstreak, i'm looking for a stock 95 GS-T driver side, side skirt with half gray and half red.

If i can get the set for both sides, that would be good also, let me know what the deal is, thanks.

[greenstreak]

thanks again Check your email....you have a tracking number waiting for you. It might not be active yet though.

[1QuickChic]

thanks greenstreak :D

[1QuickChic]

oh yeah do ya know when its spose to be here??? or just check the tracking number?

[greenstreak]

I looked into the manual and powersteering racks this morning. The power steering rack itself it $800 and the manual rack only is $500. If you need any lines, fittings, or pumps in addition the price will go up from there.

[greenstreak]

Hey greenstreak, i'm looking for a stock 95 GS-T driver side, side skirt with half gray and half red.

If i can get the set for both sides, that would be good also, let me know what the deal is, thanks.
The skirts and door cap will not come prepainted.
Door cap $85.86
Sideskirt is $172.33ea.

The 95/96 stuff is actually more expensive than the conversion pieces from 97+. :eek:

[greenstreak]

Estimated del. date is the 16th Charity.

[evoX3]

Please reply to my questions on page 5
thanks.

[psykhotic]

I need a Hatch cover for 96 Eclipse. Shipped to 94546. Dealer quoted it at $150 which is way too much.

[1QuickChic]

hey green gotta another question, on pricing - 90 trans turbo and nt syncro set complete 91 turbo and nt syncro set complete, and a 91 galant vr-4 engine wiring harness, ehh think that'll work....

[greenstreak]

Yes, we can supply you with the shift forks and the x-fer case recall kit.
The 1-2 fork is $48.25, the 3-4 fork is $45.85, and the recall kit for the x-fer case with the yoke and u-joint is $28.61.

Sorry for missing this the first time around.


Hi,can you supply steel shift forks for W5M33 trans and slip yoke recall kit.
I am in Australia,is this a problem?Also need many other products.Would you have a catalog that you can mail to me?
Thanks,Brett.

[greenstreak]

I need a Hatch cover for 96 Eclipse. Shipped to 94546. Dealer quoted it at $150 which is way too much.
I can do a little better than the dealer at $113 plus shipping. It is pretty big though so shipping might be alot. Figure in the area of $40 to ship it from Pa to Ca.

[greenstreak]

hey green gotta another question, on pricing - 90 trans turbo and nt syncro set complete 91 turbo and nt syncro set complete, and a 91 galant vr-4 engine wiring harness, ehh think that'll work....

Is the turbo trans awd or fwd? You just need all of the synchros?

What part of of the wiring harness do you need? The part with the injectors and stuff up along the firewall is no longer available from Mitsu. The section along the front of the car with the fogs is still available I believe.

[1QuickChic]

Is the turbo trans awd or fwd? You just need all of the synchros?

What part of of the wiring harness do you need? The part with the injectors and stuff up along the firewall is no longer available from Mitsu. The section along the front of the car with the fogs is still available I believe.

both sets of syncros, and yes all, im gonna start doing more rebuilds, and its ok on the harness, i was looking fro the part with the injectors, you dont know by anychance if a turbo eclipse will fit :confused:

[greenstreak]

Sorry for not getting back to you sooner. With the board changes and being very busy here I haven't gotten back to your prices. I will get back to you here ASAP!

[Tenacious-B]

How about a charcoal canister for a 97 GSX? Gotta love Cali law.

[91turbogsx]

I need/want all the rear camber bolts, nuts, and washers. I basically need all the rear bolts, nuts, and washers for everything attached to the rear subframe. If you can get me prices or a total on that stuff that'd be greatly appreciated and i'll definitely be making an order.

Thanks

[EcLiPsEgSx012]

sup erik.

I still have to buy those part from you soon but i need this part asap caliper bracket bolts for 95 eagle talon tsi rear. If you could get it let me know.

[greenstreak]

Front bracket bolts are $3.38 each.
Rear bracket bolts are $1.10 each.

sup erik.

I still have to buy those part from you soon but i need this part asap caliper bracket bolts for 95 eagle talon tsi rear. If you could get it let me know.

[greenstreak]

I need/want all the rear camber bolts, nuts, and washers. I basically need all the rear bolts, nuts, and washers for everything attached to the rear subframe. If you can get me prices or a total on that stuff that'd be greatly appreciated and i'll definitely be making an order.

Thanks
OK, we'll tackle them in groups.

Upper control arm eccentric bolt and assoc. hardware.
-Eccentric bolt $4.55 each
-Eccentric plate $.92 each
-Washer $.62 each
-Nut $1.40 each

Lower arm hardware
-bolt $4.25 each
-bushing $5.74 each
-washer $.51 each
-nut $.74 each

Trailing Arm Eccentric Hardware
-Eccentric Bolt $4.55 each
-Eccentric Plate $.92 each
-Washer $.62 each
-Nut $1.40 each

[greenstreak]

How about a charcoal canister for a 97 GSX? Gotta love Cali law.
Sorry I didn't get back sooner. The charcoal canister goes for $71.12.

[xander_eclipse]

I need a GS-T Spoiler
Pair of OEM Side Skirts

shipped to Montreal Quebec j4z 3h3

[1QuickChic]

how bout shifter rebuild kits green?? primarily the bushings

[Tenacious-B]

Sorry I didn't get back sooner. The charcoal canister goes for $71.12.

No worries. I'll need to order one in June or so. Glad to know it's not crazy expensive. Thanks for the response.

[ujsjls1]

I REALLY need a pass. side rear ABS cv axle (outer or entire) and a right rear ABS wheel sensor. Availability? Thanks

[White90TSiAWD]

How do you figure shipping?

[JNZTuning]

How do you figure shipping?


Please see the thread entitled "Shipping" under our forum which explains all of this.

Thanks

[White90TSiAWD]

Please see the thread entitled "Shipping" under our forum which explains all of this.

Thanks

sorry, not finding anything.. Are you talking about dsmtalk forums? Or your website?

[JNZTuning]

sorry, not finding anything.. Are you talking about dsmtalk forums? Or your website?


It was an older thread. I stickied it, but here's the link

Shipping (http://www.dsmtalk.com/forums/showthread.php?t=145599)

[White90TSiAWD]

Thank you.

Can you please estimate shipping to 55123 for the following parts.

Timing belt
Timing belt tensioner
Timing belt hydraulic tensioner
Idler pully

thanks again
-Brent (1990 turbo 6 bolt)

[JNZTuning]

Thank you.

Can you please estimate shipping to 55123 for the following parts.

Timing belt
Timing belt tensioner
Timing belt hydraulic tensioner
Idler pully

thanks again
-Brent (1990 turbo 6 bolt)

Would be in the $7-$8 range

[Juicy47]

What's your price on 2G door handles? Do they come primed/painted/neither?

Thanks

[GST_CSF]

how much for a crank position sensor for a 97 gst?

[cntcheatkarma]

Do you guys sell the lower timing belt cover.

[GST_CSF]

can i get that qoute for the crank position sensor plz :)

[Aetro]

sent greenstreak a pm before i found this thread again, but how much for a 95 map sensor, and how long would it take to get to 49048?

[ujsjls1]

I REALLY need a pass. side rear ABS cv axle (outer or entire) and a right rear ABS wheel sensor. Availability? Thanks

[Wufei]

Heya, looked on JNZ but couldn't find it. How much for the master and/or slave clutch cylinders shipped to 46033?

Thanks!

[AWD92TalonTSi]

looking for 1 set of the 2 pieces that is for holding the rear spoiler on a 1gA.

shipped to 49424

thanks,

bryan

[cntcheatkarma]

I was looking at the auto tensioner for the 1g. It doesnt look anything like the one on my car, yet the one you guys has listed for the 2g looks exactly like mine. :confused:

[DSMX1]

id be eayier if a website was created with the prices instead of quoteing them on the forums.

[Wufei]

http://www.jnztuning.com/ ;)

[ujsjls1]

is anyone getting prices, etc. Just wanted to make sure i'm not mising something. :)

[AWD92TalonTSi]

is anyone getting prices, etc. Just wanted to make sure i'm not mising something. :)

no your not the only one, try calling JNZ, thats what i'm going to do tommorow.

bryan

[JNZTuning]

no your not the only one, try calling JNZ, thats what i'm going to do tommorow.

bryan


Sorry, but Erik's been busy on the phone, answering e-mails, and trying to get back to PMs.

Feel free to contact us in one of those manners if he doesn't have time to answer forum posts.

Also, please visit the website and make sure that the pricing isn't listed on there before asking for a price here. I've had Erik spend a lot of time adding stuff on there, and I can't have him relist pricing on here numerous times as well.

Thanks guys!

Josh

[JNZTuning]

I was looking at the auto tensioner for the 1g. It doesnt look anything like the one on my car, yet the one you guys has listed for the 2g looks exactly like mine. :confused:

http://www.jnztuning.com/catalog/product_info.php?cPath=21_90_91&products_id=13

We have all of the cars listed by groups on the catalog. Select, "engine", "Timing Belt Parts", then your year/model.

[AWD92TalonTSi]

Sorry, but Erik's been busy on the phone, answering e-mails, and trying to get back to PMs.


I completely understand and will call tommorow,

bryan

[greenstreak]

hey green gotta another question, on pricing - 90 trans turbo and nt syncro set complete 91 turbo and nt syncro set complete, and a 91 galant vr-4 engine wiring harness, ehh think that'll work....

All synchros for a 90 trans. $69.20 (This is all synchro rings only)
Prices will be comparable across all models.

[greenstreak]

how bout shifter rebuild kits green?? primarily the bushings

There is no real rebuild kit for the shifter assembly but I can get any of the bushings you might need. The shaft bushings at the pivots are the common onces to wear and they are $3 for all 4.

[greenstreak]

I REALLY need a pass. side rear ABS cv axle (outer or entire) and a right rear ABS wheel sensor. Availability? Thanks

ABS sensor $97.10
Axle $171.54

[greenstreak]

How do you figure shipping?

It is calculated at www.dhl.com using weights and zip codes.

[greenstreak]

What's your price on 2G door handles? Do they come primed/painted/neither?

Thanks

Door handles are $55.11 each and come in black only.

[greenstreak]

how much for a crank position sensor for a 97 gst?$49.58

[greenstreak]

Do you guys sell the lower timing belt cover.

Sure do. $71.99

[greenstreak]

sent greenstreak a pm before i found this thread again, but how much for a 95 map sensor, and how long would it take to get to 49048?

$98.16 and in stock.

[greenstreak]

Heya, looked on JNZ but couldn't find it. How much for the master and/or slave clutch cylinders shipped to 46033?

Thanks!

Slave $38.54
Master $77.12
Shipping approx. $8.

[greenstreak]

is anyone getting prices, etc. Just wanted to make sure i'm not mising something. :)


Though it does appear that way sometimes....I do not live on DSMTalk. The past month or so has been so busy that it has prevented me from getting online during the day for personal or business use. When you see me posting in threads lately it is when I am off the clock and don't have access to prices. ;)
If it is a rush your best way to contact us is with the phone number listed on the site. ;)

[ujsjls1]

I'll be callin. Thanks.

[Wufei]

Thanks for all the help and your great attitude! greenstreak :)

[greenstreak]

Just glad I can help. :)

[dyablo]

Just got done ordering all my timming components/water/oil pump and prices were great. You will definetly be hearing form me in 60K miles :D .

By the way whats the price for an a/c compressor for a 96 eclipse with a m/t?

[greenstreak]

The AC Compressor Assembly goes for $483. There are usually tons of them available used though online.

[ujsjls1]

ABS sensor $97.10
Axle $171.54


Is that the entire ABS Axle or outer?

[OE812]

Greenstreak:

I have a 92 Eclipse with 134,000 miles with the 1.8L, automatic, a/c. I recently purchased the car and the previous owner has never changed the timing belt. I need a price on timing belt kit (timing belt, balance belt, tensioners, etc. and water pump.

Thanks,

jeff

[turboneal]

Greenstreak:

I was hoping to get prices for the following items for a 2Gb GSX:

Required AWD Parts

Transmission
Transfer case
Front axles
Drive shaft
Exhaust
Fuel tank and shield
Rear subframe
Rear axles
Rear differential
Swaybar
Rear knuckles
E-brake cables
AWD Flywheel

Recommended AWD Parts (In addition to the above)

AWD fuel tank connectors
AWD subframe rear bolts
AWD drive shaft and exhaust brackets (spot welded in the tunnel)
Entire AWD rear suspension assembly (all control arms)

The purpose is to convert My GST to GSX (AWD conversion). :)

(i pulled this list from the following link:

http://www.automotivearticles.com/AWD_Conversion.shtml

If anyone sees more that i need, let me know.

any help that you can give me on the prices for these parts would be much appreciated. (when you have time...)

Thanks,
-Neal

[gammey4]

drivers side motor mount 95 gst shipped to 37042.

[Stoicalpear]

Power transistor (95) Eclipse Turbo

[BaliTSi]

hey! i saw on this link: http://www.dsmtalk.com/forums/showthread.php?t=136759 that the 2G Timing belt tensioner is $51.66. is that tensioner hydraulic? how much would shipping be to 33161? thx!

[greenstreak]

Is that the entire ABS Axle or outer?

That is the entire axle.

[greenstreak]

Greenstreak:

I have a 92 Eclipse with 134,000 miles with the 1.8L, automatic, a/c. I recently purchased the car and the previous owner has never changed the timing belt. I need a price on timing belt kit (timing belt, balance belt, tensioners, etc. and water pump.

Thanks,

jeff

Timing belt is $59.42
tensioner $18.52
Bshaft belt $21.14
Bshaft tensioner $21.80
Water pump $86.09

[greenstreak]

I'll be back for the rest ASAP

[92LaserRSturbo]

I need a Price on a TPS for a 92 Laser FWD Turbo shipped to 46619

[greenstreak]

Greenstreak:

I have a 92 Eclipse with 134,000 miles with the 1.8L, automatic, a/c. I recently purchased the car and the previous owner has never changed the timing belt. I need a price on timing belt kit (timing belt, balance belt, tensioners, etc. and water pump.

Thanks,

jeff

timing belt $59.42
Tensioner $18.53
Balance Belt $21.14
B-shaft Belt Tensioner $21.80

[gammey4]

drivers side motor mount 95 gst shipped to 37042. ?

[BaliTSi]

hey! i saw on this link: http://www.dsmtalk.com/forums/showthread.php?t=136759 that the 2G Timing belt tensioner is $51.66. is that tensioner hydraulic? how much would shipping be to 33161? thx!


???

[Got_boost_30psi]

Hey greenstreak i know u tired of hearing from me haha jk. but in my wifes na the iacs went out i pulled it out and there is a nipple but yet ive seen serveral types do i have the wrong one in there i want to know before i go buy a new one.

[dnhieu]

I was wondering if i could get just the hubs for a 4 bolt rear end.


thanks alot
david

[brokeawd]

Greenstreak you deserve an award for this thread.

[krkline2gdsm]

FEW QUESTIONS: 1995 eclipse GST

I need these parts:
MIT MR187699 turbo bolts w/ washers 34.00
SS EX manifold stud kit for the 7 bolt - 2 larger studs 50.00
SBR-0076 balance shaft elim. kit 42.00
SBR-0088 1g water line kit 45.00
MB868457 fuel filter 25.00
MIT MD 156604 Idler pulley 35.00
MIT MD129355 Tensioner pulley 30.00
2G-MD 308086 Timing Belt Hydraulic Tensioner 87.00
MD 129350 Tensioner Bolt 5.00
MIT MD087060 Lower Injector seals 10.00
MIT MD146399IN, MD 340327OUT TB gaskets BOTH: 10.00
Mitsu 4 layer gasket
Timing belt
water pump


I am doing a 1G head swap on my 95 eclipse 7bolt. I have the water crossover pipe, u pipe and the line that goes on the side of the head. I also have the tstat housing too. I beleive this is all I need to put this setup together. I pulled these numbers off the SBR website. Was told you could give better prices. Shoot me a qoute and I will talk to you on the phone, confirm, and put the order through. Oh and I also need a new 4 layer gasket.

Also, I pulled the head of my eclipse. It has a 4 layer gasket in there and it is stamped with 63-347. Any idea what gasket this is???

One more, I cannot find my paint code. I found the spot where it can be found but I cant make it out. I have a white 95 GST. What is the paint code for that vehicle. If you need the VIN, I will send it

[dedlewamp]

Green,

When you have a moment, could you get me a few prices on the following items? I'll be ordering them fairly soon. I appreciate it!

Hydraulic Lash Adjusters / Lifters(3G Revised)
OEM Valve Seals
OEM Valve Springs & Retainers
Oil Filter Housing Gasket Engine: 6Bolt
Exhaust Manifold Gasket
Exhaust Manifold to Turbo Gasket

[greenstreak]

I'll just add the prices right in your quote. Most you are going to want to source used on your own or you will spend a fortune.

Greenstreak:

I was hoping to get prices for the following items for a 2Gb GSX:

Required AWD Parts

Transmission $1692
Transfer case (I would have to call this in but figure somewhere in the area of $1000)
Front axles (roughtly $600 each)
Drive shaft $875
Exhaust (Quick online search is probably the easiest to find aftermarket stuff)
Fuel tank and shield $800
Rear subframe $529
Rear axles $300 approx.
Rear differential $1700
Swaybar (Best bet is to look up RM bars)
Rear knuckles $131
E-brake cables $27.21 ea.
AWD Flywheel (OEM, ACT, Fidanza?)

Thanks,
-Neal
That will get you started.

[greenstreak]

drivers side motor mount 95 gst shipped to 37042.

$42.90

[greenstreak]

Power transistor (95) Eclipse Turbo

$96.08

[greenstreak]

hey! i saw on this link: http://www.dsmtalk.com/forums/showthread.php?t=136759 that the 2G Timing belt tensioner is $51.66. is that tensioner hydraulic? how much would shipping be to 33161? thx!


Yes it is. I dont' think there is any other kind. :)

Shipping will be about $9.

[greenstreak]

I need a Price on a TPS for a 92 Laser FWD Turbo shipped to 46619


$117.20

[greenstreak]

Hey greenstreak i know u tired of hearing from me haha jk. but in my wifes na the iacs went out i pulled it out and there is a nipple but yet ive seen serveral types do i have the wrong one in there i want to know before i go buy a new one.

I'm not sure what you are asking here.

[greenstreak]

I was wondering if i could get just the hubs for a 4 bolt rear end.


thanks alot
david

NO, it doesn't appear that you can get just the hub part for the 4 bolt rear.

[greenstreak]

I will include our prices in parenthesis after the SBR price for comparison

FEW QUESTIONS: 1995 eclipse GST

I need these parts:
MIT MR187699 turbo bolts w/ washers 34.00 (JNZ $25.95)
SS EX manifold stud kit for the 7 bolt - 2 larger studs 50.00 (Our 6 bolt SS kit is $40. I don't currently have the 2 larger bolts and nuts though. If you were to get everything but those 2 studs, nuts and washers, I could do it for that $40)
SBR-0076 balance shaft elim. kit 42.00 (Not sure what they include but my price will include all of the gaskets, OEM oil grooved stub shaft, cap, sprocket spacer, two bearings, etc. $52.xx)
SBR-0088 1g water line kit 45.00 (Not sure what this is. OEM lines?)
MB868457 fuel filter 25.00 ($17.19)
MIT MD 156604 Idler pulley 35.00 ($26.39)
MIT MD129355 Tensioner pulley 30.00 ($22.41)
2G-MD 308086 Timing Belt Hydraulic Tensioner 87.00 ($54.09)
MD 129350 Tensioner Bolt 5.00 ($1.67) Only 90 motors will need this.
MIT MD087060 Lower Injector seals 10.00 ($4.71)
MIT MD146399IN, MD 340327OUT TB gaskets BOTH: $10.00 ($4.68)
Mitsu 4 layer gasket ($73.29)
Timing belt ($56.98)
water pump ($101)




Sometimes is pays (or saves) to go direct. ;)

[krkline2gdsm]

HOLY SHIT DUDE!!! I will be calling you soon. Im sure I will need more parts. I almost called SBR today. LOL Thank god I didnt. Also,would you be able to tell me my paint code??? I cant make out what mine says.

The 1g water lines I talk about re the turbo water lines for a 91-94. They are 45.00 from SBR. Im sure I may need other water lines as all mine are corroded towards the bottom of the car.

[44pirate]

2g exhaust manifold heatsheild. Turbo of course.

[Got_boost_30psi]

im asking about the idle air control motor/sensor do u havea pic of it i want to make sure i got the right one.

[greenstreak]

im asking about the idle air control motor/sensor do u havea pic of it i want to make sure i got the right one.
ISC...on th throttle body....idle surge causing extraordinaire? I'll price one tomorrow.

[greenstreak]

2g exhaust manifold heatsheild. Turbo of course.

$40 approx. I can tell you exactly tomorrow from work.

[greenstreak]

HOLY SHIT DUDE!!! I will be calling you soon. Im sure I will need more parts. I almost called SBR today. LOL Thank god I didnt. Also,would you be able to tell me my paint code??? I cant make out what mine says.

The 1g water lines I talk about re the turbo water lines for a 91-94. They are 45.00 from SBR. Im sure I may need other water lines as all mine are corroded towards the bottom of the car.
I'll take care of you on the water lines as well. I am sure I can beat that price. ;)

[97gsxminus1bolt]

Im sorry if this isnt the right place to ask but can i get a price on
1. 2g black carpet
2. 2g black mats
3. 2g black headliner
4. evo oil cap the one that says mobil1

Thats it thanks.

[greenstreak]

Never made black carpets. Grey, blue, and tan only for 2Gs. I'll check on the oil cap.

[97gsxminus1bolt]

For some reason i thought they did well how about grey carpet and gret mats.

[44pirate]

$40 approx. I can tell you exactly tomorrow from work.
Shipped to 33990?
How much.
Call me.
check pm

[dedlewamp]

Green,

Not to bother you again or anything, but post 229. I'm feeling left out! Appreciate your help, and I'll be placing an order here within the next few days or so depending on my money situation.

[greenstreak]

Green,

Not to bother you again or anything, but post 229. I'm feeling left out! Appreciate your help, and I'll be placing an order here within the next few days or so depending on my money situation.
I'm sorry, I must have missed that one. I'll pick it up on Monday for ya. If you get antsy feel free to call me at JNZ and I can give you prices over the phone as well. :)

[krkline2gdsm]

Can you get me the part numbers for thses lines that run off the oil filter housing??? I have a 95 GST Here are the pics to refer to. If I can get these part numbers from you, I can call you next week and use them to help get my order together faster so we arent playing phone tag. I alsoneed the part number for the downpipe hangerthat you see all rusted out. Need the bracket and the strap

http://i11.photobucket.com/albums/a170/fst2qtrmile/Untitled_0083005_0002.jpg
http://i11.photobucket.com/albums/a170/fst2qtrmile/Untitled_0083005_0003.jpg
http://i11.photobucket.com/albums/a170/fst2qtrmile/Untitled_0083006_0001.jpg