PDA

View Full Version : Coolingmist.com




91_gsx
11-20-2005, 02:33 AM
great customer service. my package was delievered on time no problems. David help'd me with what kit would be best to go with and was always there whenever I called and asked a question. I would recommend anyone to get a water/alky injection thru him. great prices and great service!




cbilmer
11-20-2005, 10:57 AM
Nice, I was wondering how they were to deal with. Great to hear that somebody has tried out their stuff.

Let us know on the quality of the parts, kit and how well it all goes together.

91_gsx
11-23-2005, 12:52 AM
Nice, I was wondering how they were to deal with. Great to hear that somebody has tried out their stuff.

Let us know on the quality of the parts, kit and how well it all goes together.

quality of their products are excellent. I opt'd for the single stage deluxe kit. install is easy as long as you know where you want to mount the water pump and relay. the only problem i came around on was drilling the hole for the injector on my Throttle body elbow. I drilled to close and now i can't install one of the bolts that bolt up to the throttle body. my mistake on that part. Other than that it was an easy install. I haven't tested the system yet due to my radiator having a leak. I'll have pictures to come once i get done with everything

TURFNNSURF
11-23-2005, 10:47 PM
I installed the Coolingmist Single stage deluxe kit a few months ago. Customer service and dealing with David was great. The install went very well, only problem was locating a mounting location for my 150psi pump in the engine bay. Since the install, I have been able to run 25psi daily on 93 pump gas with almost ZERO knock, in all sorts of weather. Most impressive, was being able to tune for only 1-3 counts of knock at the top of 3rd @ 7200rpm in 85+ degree temps. I have logged "tip in" knock a few times before the pump is triggered at 14psi+ but I think that is a GM MAFT issue. My only regret was under estimating my HP when ordering the kit. I need a larger nozzle for the H2O injection so I can really push the car on pump gas during the summer at the track. Here are a few install pictures from my car.
http://memimage.cardomain.net/member_images/9/web/345000-345999/345603_119_full.jpg
The tap in the Washer res feed line to the pump.
http://memimage.cardomain.net/member_images/9/web/345000-345999/345603_118_full.jpg
I wired the system to a toggle hidden in the fuse block, when the toggle is "ON" the system is armed when I start the car, as soon as the boost hits 14psi the pump is activated and a red L.E.D. is lit up in my gauge pod letting me know it's working.
http://memimage.cardomain.net/member_images/9/web/345000-345999/345603_121_full.jpg

cbilmer
11-24-2005, 08:06 AM
Looks pretty nice!

I think I'm going to throw the tank in the corner or the trunk or under the spare and probably the pump as well. Only probably is running some power and water lines ALL the way up to the front after but I think it'll be fine.

I just picked up a supra sidemount and I think I'm sticking with the sleeper type look so this water/meth injection is going to kick some ass!

BOOSTERchair
11-24-2005, 08:59 AM
hmm looks instering. what was the cost for everything?

greenstreak
11-24-2005, 09:15 AM
Being that this is a Vendor Review lets try to keep this discussion about the vendor themselves and not the product. If you want to talk about that start a thread in Parts Talk so each can be on topic to the title.
Thanks. :)

14.5 drift
11-25-2005, 07:51 PM
Being that this is a Vendor Review lets try to keep this discussion about the vendor themselves and not the product. If you want to talk about that start a thread in Parts Talk so each can be on topic to the title.
Thanks. :)
Werd, I always enjoy a good water injection thread :)

gota0have0boost
11-25-2005, 08:25 PM
I started a thread in parts talk. I am interested in a cooling mist kit. Ide like to hear what some of you guys have experienced. :)