PDA

View Full Version : SOHC 4g64 oil leak




dabigbbadwoof
04-19-2006, 10:38 PM
so i just bought a 94 galant as a daily driver and i was doing a little tune up the other day when i went to change my spark plug wires a couple of them ripped apart when i tried to pull them out.

thats not the problem i just thought that was weird the problem is that there was oil all over the plug wires and i could see a bit of oil pooled around the plugs theres no oil on the valve cover so my only guess is plug seals.

can anyone help me out on this one.?




dsm1991_28
04-23-2006, 09:54 AM
It sounds like your spark plug well gaskets went bad. Just replace your valve cover gasket and you'll be fine.

dabigbbadwoof
04-25-2006, 12:24 AM
thanks

dsm1991_28
04-27-2006, 08:45 PM
Did you replace the valve cover gasket? Do you still have an oil leak?

dabigbbadwoof
04-29-2006, 01:29 AM
well it needs an axel and rear struts first and i am doing them as well as some belts next week so i will let you know.

do you know alot about the SOHC 4g64.?

if so any low budget things i can do to pep it up a bit.?

7inchexhaust
05-02-2006, 10:54 PM
well it needs an axel and rear struts first and i am doing them as well as some belts next week so i will let you know.

do you know alot about the SOHC 4g64.?

if so any low budget things i can do to pep it up a bit.?


you could get a throttle body spacer and put down some real hp like me :P

dabigbbadwoof
05-03-2006, 10:51 AM
would that really make a diff.? what if i get the TB ported and in intake i should maybe feel alittle more power right.?

7inchexhaust
05-03-2006, 06:27 PM
yea u should definatly get an intake and a bigger throttle body. unless you have some serious time on your hands and good porting skillz, screw the porting and get a bigger one. my .02