Need quick answer [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: Need quick answer


funguy
12-10-2006, 06:24 PM
I have a 2g, and doing a build 6 bolt swap. I have a spare 2g intake manifold and layed a 1g gasket over it because of the 1g head! IT does not match!
the 2g manifold flange is way too small, and the 1g head ports are larger than the flange. So there is a gap where all the air will leak out.

Anyone ran into this problem? 2g manifold on a 1g head? BOOOO!!!

4G63_DSM
12-10-2006, 06:30 PM
umm and why did you need a QUICK answer?

T_K
12-10-2006, 06:35 PM
You needed to search I think. 1G head needs 1G manifold.

funguy
12-10-2006, 07:16 PM
ok, i just need a to see if i made a mistake. i guess i washed this and bought a used 2g for nothing now. i guess time to buy the right intake manifold. looks like i am now upping the ante and buying an SMIM , that means i have to buy a 1g SMIM right?

thanks

eagle claw
12-10-2006, 07:36 PM
yes if you have a 1g head you need to get a 1g smim