JNZ's customer car pics needed!!

[11secdsm]

As part of the new website that i'm building, i'd like to put up pics of JNZ's customers' cars in appreciation of your business and to share with the rest of the DSM community. If you'd like your car featured on the new JNZ webpage, please post up a couple pics (preferably one exterior pic and one motor pic) along w/ a mod list.

Thanks!

[MindBlowin03]

If you would like, you can copy/paste my mod list from the Mods Ride's page and I can send you a couple newer pics of my car. Let me know.

[11secdsm]

If you would like, you can copy/paste my mod list from the Mods Ride's page and I can send you a couple newer pics of my car. Let me know.

I'd appreciate that Nick. Thanks!

[D_Eclipse9916]

You could always sponsor me lol.

[TTupgst]

This is a pic from Beaver Springs a few weeks ago.
http://img443.imageshack.us/img443/3374/100mph53xv5.jpg (http://imageshack.us)

Erik knows me as Tim from A&A

[Red1991TSI]

Hey Chris,

You're welcome to use mine. I'll even shoot some new ones and e-mail them if you'd like.

Steve

[Red1991TSI]

Erik knows me as Tim from A&A

You sure that's not Erik knows you as Tim from AA?:P

[turbolover]

I was reppin jnz out at the track last night! :P
You can use mine if I get a free sticker:cool:
http://www.dsmtalk.com/forums/showthread.php?t=175608

[french_hustler]

http://i6.tinypic.com/67xknf8.jpg

I have some more I can upload.
I'll get some nicer pics once the car is running ;)

[11secdsm]

This is a pic from Beaver Springs a few weeks ago.
http://img443.imageshack.us/img443/3374/100mph53xv5.jpg (http://imageshack.us)

Erik knows me as Tim from A&A

I know your car...hard to forget the 2g FWD that drives on slicks to meets. :D

[11secdsm]

Hey Chris,

You're welcome to use mine. I'll even shoot some new ones and e-mail them if you'd like.

Steve

Please do...and don't forget the mod list.

[11secdsm]

Tim, David, and TurboLover...can you post up a partial (or entire) mod list for your respective cars? Thanks!

Put it in the following format if you don't mind....

Engine
-
-
-
-


Intake & Exhaust
-
-
-
-

Fuel
-
-
-
-

Drivetrain & Transmission
-
-
-
-


Suspension & Brakes
-
-
-
-


Electronics & Monitoring
-
-
-
-

Other
-
-
-

[TTupgst]

97 GST

Engine
-2.0(164000 mile stock shortblock) no balance shafts
-ss valves
-comp cams 101100's
-manley springs


Intake & Exhaust
-JMF smim
-BBK TB
-T61 full T4(Zach J's old turbo)
-Revhard T4 mani
-3" open downpipe
-Turbonetics raptor bov
-FP intake pipe
-cheap fmic

Fuel
-Walbro 255hp
-880cc
-Aeromotive regulator
-Aem rail
-ss lines

Drivetrain & Transmission
-stock trans, stock axles
-Zoom clutch
-Hoosier QTP 26x9.5x15
-


Suspension & Brakes
-junk coilovers
-tokico struts
-stock brake system w/Hawk pads
-


Electronics & Monitoring
-JeffO eprom
-safc
-1 gauge(35psi autometer)
-

Other
-Civic radiator
-Rota knockoffs
-12.4@123mph, working some bugs out, 130mph+ to follow

[french_hustler]

1997 Eclipse GSX 2.0L AWD Turbo

--Engine--
-Block-
-Pauter X-beam rods
-Ross pistons 8.5 .020 over
-ARP hardware

-Head-
-Head work. Port/Polish
-5 angle valve job
-1mm over
-Supertech retainers and dual springs
Supertech valves
-HKS 272/272 cams
-Arp head studs
-MLS head-gasket

--Intake--
-K&N fpik air filter
-Greddy Intercooler
-Hard piping all the way through
-FP 4" intake pipe
-1g TB
-Emission components removed
-Greddy type-s bov

--Exhaust--
-Ported 2g exhaust manifold
-Ported 2g o2 housing
-Apex-i n1 cat-back
-RRE down pipe
-High flow cat

--Turbo--
-Ported MHI Evo3 16g turbo
-Joe P inline mbc

--Fuel--
-Rewired Walbro 190hp fuel pump
-660cc Denso injectors
-Aeromotive Fuel Pressure Regulator

--Drivetrain--
-Team rip "Performace Stage 2" transaxle
-Act 2600 pressure plate with street disc clutch
-Fidanza 8lbs light weight flywheel
-B&M Short Shifter
-Shifting lines and plate metal bushings

--Suspension--
-Eibach Sport-Line springs
-Tokiko HP (non adjustable) shocks
-Ingalls rear camber kit
-Prothane motor mounts

--Tires--
-Kumho Ecsta
-17in. stock GSX rims

--Brakes--
-Front + Rear Hawk pads
-Front + Rear slotted Brembo rotors

--Tuning--
-95 eprom ecu + Dsmlink
-NGK Afx Wideband
-Autometer Egt gauge (lunar)
-Autometer Boost gauge (lunar)
-Autometer oil pressure gauge

[french_hustler]

Here's one more:
http://i17.tinypic.com/62qbj1t.jpg

[turbolover]

Engine
Stock 7 bolt, "gonna change really soon"

Head
Stock

Intake
dejon pipe/K&N filter
Dejon Super sidemount
Greddy RS bov

Turbo
Evo3 Ported/clipped

Exahust
Ported 2g mani
tubular 02
3" hks hi power exhaust

Fuel
PTE780's
walbro 255/rewired
magnafuel afpr

Transmisson/Drivetran
New bearings/seals from teamrip
bg sncroshift2 fluid
sockproof in the t-case
Centerforce clutch/lightened fly.
ss clutch line
B&m short shifter
Metal base bushings
symbroski bearing mod

Suspension/Brakes
Megan 32way adj. coilovers
poly bushing master kit
cross drilled/slotted rotors
ss brake lines

Electronics
dsmlinkv2
aem wideband
autometer elec. boost
hks tt

Other
17x7 tig wheels

[gota0have0boost]

http://gota0have0boost.com/resized1.jpg
http://img70.imageshack.us/img70/1440/1000314nh2.jpg

Engine
New "Race Motor" Built by Tim Tupper from AA for the 2008 season:)
-Mahle 8.5:1 forged pistons
-Eagle forged rods
-ACL Race bearings
-Balanced rotating assembly
-Polished crank
-BSE
-ARP everything
-Mitsu MLS HG
-Ported and polished head
-Revised lifters
-SS valves
-Bronze guides
-FP Dual Valve Springs
-BC 280's
-Fidanza cam gears
-Jay Racing alternator relocation
-Revhard T4 manifold
-Tial 44mm wastegate
-Greddy Kevlar T belt
-Forward facing oil filter housing

Turbo
-Garrett GT4094r:D

Intake & Exhaust
-FP/JMF custom intake pipe
-JMF custom UICP
-2 1G BOV's (Gus Modded, both recirculated)
-2g MAS
-Dejon Tool LSK
-JMF intake manifold
-JMF catch can
-DT Race FMIC
-4" front exit exhaust
-Joe P. MBC

Fuel
-Bosch 044 pump
-#8 fuel lines
-FIC rail
-FIC 1600cc injectors
-Aeromotive AFPR

Drivetrain & Transmission
-BM Race tranny w/ all the goodies
-Taboo billet clutch fork(probably a collectors item)
-SS clutch line
-4 bolt rear
-ACT 2600
-Comp Clutch lightweight steel flywheel

Suspension & Brakes
-KYG AGX's
-Ground Control Coilovers
-Wicked bad camber
-Baer 13" track kit
-SS lines

Electronics & Monitoring
-Autometer gauges
-Greddy TT
-PLX M300 WBo2
-DSMlink v2.5

Other
-Fluidyne Radiator
-Slimfans
-Summit lightweight buckets
-5 point harnesses
-JMF 10 point Chromoloy Roll Cage
-Window net
-JMF small battery kit
-CoolingMist single stage meth kit w/ aquamist injector
-Weight reduction out the WAAZOO!
-17" Rims
-Kuhmo Tires
-Franks Custom Fiberglass CF Hood

Is it bad when you forget the rest:confused: There is so much other stuff, I just cant think of it off the top of my head:D

I am an avid supporter of JMF/JNZ as you can see. All the guys that work there are great. If you want quality parts at great prices, JNZ and JMF are the only way to go in my book. The customer service has always been great and the products are top notch to boot. My hat goes off to all the guys there that made being a DSMer a little bit easier.:)

Oh, and all those parts are now going into Chris's(11secDSM) car I picked up from him a few months ago. I dubbed it, "Project Part Out." It will be a full blown race car.

This Car VVVV

[11secdsm]

Thanks guys! Keep the cars coming!

[The_EE]

Since I will be a customer as of Tuesday.

Engine
-7 Bolt w/ Eagle/Ross combo .20 over
-ACL Race Bearings
-ARP Studs
-1g Race Head from RRE ( CnC ported, valve job etc )
-HKS 272 Cams
-GReddy Td06h-20g from Performance Techniques
-Punishment Racing SS Tubular Manifold
-Punishment Racing SS 02 Housing
-Tial 38mm Waste Gate



Intake & Exhaust
-Dejon Tool 3" Intake
-JMF 1g Race SMIM
-GReddy UICP
-APEXI 3' Turbo Back N1
-GReddy Type S


Fuel
-Denso 720's
-Aeromotive AFPR w/ SS Line
-Walboro 255 hp rewired


Drivetrain & Transmission
-TRE Tranmission
-Clutchmasters S-4 6 puck Clutch
-SS Clutch Line



Suspension & Brakes
-Skunk 2 lowering Springs
-KYB Shocks
-Stock brakes



Electronics & Monitoring
-DSMLink
-AEM UEGO 6-1 Wideband
-Autometer Boost gauge
-VDO EGT
-HKS Turbo Timer

Other
-Dejon Tool MBC

Car is nearing completion and with a little help, will be ready for BOTI in July.

http://i38.photobucket.com/albums/e119/The_EE/GSX001.jpg
http://i38.photobucket.com/albums/e119/The_EE/005-3.jpg

[turbo3000dsm]

Engine
- Stock rebuilt 2.0L 6 bolt
- Bore 0.50 over
- No balance shafts
- ARP headstuds
- Prothane motor mounts
- DKS 272 cams
- NGK BPR7ES spark plugs

Intake & Exhaust
- 2G MAF
- Ported 1G exhaust manifold
- EVOIII/Big 16g
- Custom FMIC
- Custom 3" turbo-back exhaust
- Greddy Type-S BOV

Fuel
- Walbro 195 pump
- PTE 880cc injectors
- -6an SS fuel line
- Spoolin' Up AFPR

Drivetrain & Transmission
- JNZ Tuning Rebuilt tranny
- ACT 2600 clutch
- Extended slave rod
- SS clutch line

Suspension & Brakes
- Eibach Sportline springs
- KYB AGX struts
- Front upper strut bar
- 225/45/17 Wanli tires
- 2G OEM big brake upgrade

Electronics & Monitoring
- DSMLink
- PLX M-300 wideband o2
- Autometer Z-Series boost gauge
- Autometer Z-Series EGT gauge
- Summit Racing fuel pressure gauge

http://i5.photobucket.com/albums/y192/turbo3000dsm/IM000653.jpg

http://i5.photobucket.com/albums/y192/turbo3000dsm/IM000621.jpg

[LilBeanTSI]

http://inlinethumb15.webshots.com/4494/2707725860075184278S425x425Q85.jpg (http://good-times.webshots.com/photo/2707725860075184278vYoXNI)

http://inlinethumb19.webshots.com/3922/2357136980075184278S425x425Q85.jpg (http://good-times.webshots.com/photo/2357136980075184278iDnLDN)

I'll try and get an updated engine shot as I added a Tial 44mm.

Engine
-Buschur Stage 3 Short Block
-Buschur Stage 3 Head
-Buschur COP
-Turbonetics T3 Exhaust Manifold
-Tial 44mm w/ TurboTrix Dump Tube
-BR-57

Intake & Exhaust
-Buschur SMIM
-BBK 75mm TB
-Buschur 3" UICP
-Tial BOV
-Buschur Race FMIC
-Buschur CAI
-Buschur Full 3" exhaust

Fuel
-Aeromotive A1000 w/ -8 lines
-2x Aeromotive filters
-FIC Fuel Rail
-FIC 1000 cc injectors
-Aeromotive AFPR

Drivetrain & Transmission
-TurboTrix Stage 3 Race Trans
-ACT 2600 w/ street disk
-Fidanza Flywheel

Suspension & Brakes
-DSS Coil Overs
-KYB AGX's
-255/50/16 MT ET Dag Radials

Electronics & Monitoring
-Haltech E6K
-MSD DIS-2
-Techedge 2CO WB with Gauge
-HKS EVC EZ
-AutoMeter Boost and Oil Pressure Gauges

Other
-Sparco Sprint Seats
-Simpson 5-point Harnesses
-8-Point Roll Cage w/ Swing Outs
-Battery Relocated to Trunk
-Three Speed Scattershield
-Tuned by TurboTrix

10.9@129

[diambo4life]

I would submit my pile but you already have enough entries...lol. :)

[bigjdog84]

http://www.argos.co.uk/wcsstore/argos/images/0370235A66UC291094M.jpg

[11secdsm]

I would submit my pile but you already have enough entries...lol. :)

Nothing wrong with overwhelming the webmaster! :D

[11secdsm]

http://www.argos.co.uk/wcsstore/argos/images/0370235A66UC291094M.jpg

Sweet ride Joe!

[Sleeper7]

If i can get this shifter i've been waiting on for over a month now I'd be more then glad ;)

Cars look good

[gSx-LeX]

Chris, don't forget the red car!

[11secdsm]

Chris, don't forget the red car!

haha...you know I won't. :D