PTT Twin Disc clutches now available at JNZ Tuning!!!

[11secdsm]

As promised, we are now offering PTT Twin Disc clutches!

7.25" Power-V Drag Race Clutch Mitsubishi Twin Disc

Your choice of high or low torque pressure plate and metallic or organic discs. Available for both 6 and 7 bolt AWD models ONLY!

NOTE: You will have to re-use your flywheel ring gear or we can sell you a new OEM Mitsu one for $81.75. Ring gear installation is an extra $35.


PM or call for pricing. 215-997-6850

http://i21.photobucket.com/albums/b279/11secdsm/TwinDisc.jpg

[Asmodeus]

Chris will any type of twin disc ever be available for a FWD?
:(

[newdsmman]

http://i66.photobucket.com/albums/h278/b16aef4dr/CIMG0854.jpg

http://i66.photobucket.com/albums/h278/b16aef4dr/CIMG0856.jpg

http://i66.photobucket.com/albums/h278/b16aef4dr/CIMG0858.jpg

Thats what the real thing looks like

[11secdsm]

Chris will any type of twin disc ever be available for a FWD?
:(

Exedy makes for the FWDers...both 6 and 7 bolt. PM me for pricing if interested.

Chris

[11secdsm]

Thats what the real thing looks like

Thanks for pics Frank!

[EclipseRST]

How do the splined hubs hold up? Do they warranty stripped hubs? :D

[11secdsm]

How do the splined hubs hold up? Do they warranty stripped hubs? :D

Jake, I honestly haven't heard of any problems with the hubs stripping out and I know of several people putting over 700 ft/lbs through them. I know you're looking to put a lot of power down but unsure of how much. Unless it's some absurd number I'm sure this clutch can hold it.

[TinSecondRice]

Great clutch, I LOVE mine, and its not hard at all to drive on the street.

[11secdsm]

I'd like to place the order for these on the 27th of this month. They are in stock at PTT and will ship directly to you from there. Please get orders into me before then. Tons of people wanted them...call me up with any questions or to place your order. 215-997-6850

[TEC]

I was going to PM this but is there any way we can get the end date floated out to sometime in Aug.?

[91TSiGuy]

Jake, I honestly haven't heard of any problems with the hubs stripping out and I know of several people putting over 700 ft/lbs through them. I know you're looking to put a lot of power down but unsure of how much. Unless it's some absurd number I'm sure this clutch can hold it.
If anything, this is now a problem of the past. Quarter Master had issues at first with the hubs stripping out, but now updated their design, and I believe they're almost the same discs that PTT uses. I don't recall offhand what the fix exactly was (either stronger alloy or tighter tolerances) but it shouldn't happen anymore.

A few things to note when installing these clutches:
-Make sure the discs are installed with hubs facing the proper direction for your application.
-Make sure if there's a thinner hubbed disc, that that one goes towards the transmission
-Grinding down your clutch fork for clearing of the disc housing may be necessary--or so it was with the QM model at least.

[11secdsm]

I was going to PM this but is there any way we can get the end date floated out to sometime in Aug.?

I'd like to get this order in as soon as possible honestly, but if the masses need a little longer I'll do what I can. Is the first week in August long enough?

[TEC]

For me, yes.

[TEC]

Thanks for the extension by the way.

[Black94DSM]

I to would benifit from the extension. Would that be possible ?

[11secdsm]

Thanks for the extension by the way.

No problem Rick.

[11secdsm]

I to would benifit from the extension. Would that be possible ?

The extension would be for everyone. The order will be placed at the end of the first week in August.

Let me know if you have any questions.

[Black94DSM]

That sounds great! When I order this do you charge the card right away or do you wait until you place the order.

I need to know this so I can lower the card in order to charge it again....haha.

Ill pm you so i can get a total on the cost of what i want.

[11secdsm]

That sounds great! When I order this do you charge the card right away or do you wait until you place the order.

I need to know this so I can lower the card in order to charge it again....haha.

Ill pm you so i can get a total on the cost of what i want.

I take a 10% deposit when you order it and then charge the rest the day I place the order with PTT.

[11secdsm]

Got several orders in so far...keep them coming! Thanks to everyone who is participating in this!

[11secdsm]

Got a bunch more orders in on these this past Friday. Another big thanks to everyone who's placed an order so far!

[GoT 60']

Can you pm me a price please.

[Black94DSM]

I will most likly be ordering up one of these this comming week. The group buy is till the end of the upcomming week right ?

[11secdsm]

Yes, this coming Friday is the last day. I'm going to place the order towards the end of Friday and all clutches ordered will be drop shipped to everyone who purchased one.

[Black94DSM]

When I order this, mine will be ordered with the ring gear and having it pressed on. Does PTT do this, or will they ship the clutch to you then you do it in house and ship it out to me then?

[11secdsm]

When I order this, mine will be ordered with the ring gear and having it pressed on. Does PTT do this, or will they ship the clutch to you then you do it in house and ship it out to me then?

If you're getting a new ring gear and getting it installed, the clutch would first come to us and then getting shipped to you. We'll turn it around the same day we get it though.

Chris

[Black94DSM]

Ok cool, thats what I figured.

I will be placing my order in a few days. Ill get to you before friday. Thanks for answering all my questions.

[11secdsm]

Ok cool, thats what I figured.

I will be placing my order in a few days. Ill get to you before friday. Thanks for answering all my questions.

No problem! Talk to you soon.

[10_seconds_2luv]

I want to buy a PTT clutch for my '90 AWD before friday. My car has a Shepherd stage 4 fresh rebuild in it. My car was just dyno'ed at 624 wheel horsepower. Would I want the regular or heavy duty pressure plate? I am of course gonna get the metallic plates. Thanks!

[11secdsm]

I want to buy a PTT clutch for my '90 AWD before friday. My car has a Shepherd stage 4 fresh rebuild in it. My car was just dyno'ed at 624 wheel horsepower. Would I want the regular or heavy duty pressure plate? I am of course gonna get the metallic plates. Thanks!

From what I've read/heard, the high torque PP is a driveline breaker. The low torque PP will hold pretty much whatever you can throw at it yet it's easier on your driveline. Just from the feedback we've gotten from users of this clutch, i'm going to recommend the low torque PP.

[Black94DSM]

No problem! Talk to you soon.

Thanks for putting in my order Chris! :D

[jesse92]

Hey I was curious as to where I stand on getting my clutch shipped. So I can setup a date for my mechanic to install it.

Thanks,
Jesse

[11secdsm]

PM sent.