Are these numbers right?

[Geovannie]

are these numbers right? its not going to go for a dsm is for a mirage 1.8.

"

The specs are as follows :

(1) T-25 0 - 200hp rating (Handles up to 16 psi boost and can max out around 240hp). No turbo lag and great midrange top end acceleration. Perfect for up to 12 psi boost on the 1.8 / 1.5 Mirage models.

(2) T-28 0 - 300hp rating (Handles up to 20 psi boost on small motors). Can produce up to 350hp no problems and is the best size turbo for the 1.8 motor.

(3) T-25R 300 - 350hp rating. Best for consistent high boost application and requires the use of an external wastegate controller.

All of these are ball bearing turbo's so although technically the A/R ratios etc are the same as there non ball bearing counterparts, they do flow on average 40% more and hit boost at a very low rpm level. Our turbo lancer hit boost at 1500rpm.

Other specs are as follows :

Compressor Stage Turbine Stage
Hsg Wheel . Model Whl Com HSG Whl Whl
A/R Trim Diam Flow A/R Trim Diam

(1) T-25 0.80 60 TB25 1.66/2.14 28 0.64 62 1.64/2.09
(2) T-28 0.60 60 TB03 1.83/2.37 31 0.64 62 1.64/2.09
(3) T-25R 0.70 48 T04S 2.09/3.00 44 0.64 76 1.85/2.12

The T-25 and T-28 come with the actuator assembly.

I hope this helps. "