alarm door locks

[juice]

i have a 91 tsi and i am trying to hook up an excalibur alarm. can't figure out how to hook up the door locks. can't find the wires to splice into??

[Eben]

1G's

Above the fuse block, under the driver's side dash, you will find three OEM Relays suspended in a black plastic frame... If you reach behind this frame you can access the OEM wires that go into these relays... The wires that you are looking for are BRN/WHT & BRN/BLU or BRN & BRN/BLK

2G's

Inside the senter console, you will find an OEM relay mountes to the subframe. It has a BRN/WHT & BRN/BLU, however, it order to use these wires, you must bypass the BRN/WHT & BRN/BLU wires in the OEM Keyless Entry module, located behind the rear portion of the back seat, in order to unlock the passenger's side door... -For added security, you should remove this system in the process of installing a new alarm... No need to have two active receivers in the vehicle at the same time. -Hope this helps

Eben
94 Tsi
"Installers do it with Strippers"

[WhatsADSM]

if you have a 1g....
the wires above the fusebox were really hard for me to get at, if it comes down to it on the passenger side kick panel the door control unit is right there and all the wires are very easy to tap into there.

Murray