All-New SUPER short route 2G intercooler kits!

[ETS Tom]

Because we want to keep contributing to the community that has been such a huge part of our growth, we've developed yet another lineup of intercooler kits for the 2G DSM :thumb:

These are designed with high horsepower in mind with 26" wide, 12" height and 3", 3.5", 4" or 5" thick intercoolers OMG With inlet location at the bottom of the core and outlet at top, distribution of airflow throughout the core is phenominal. The kit does require minor trimming of the core support, but the benefit is an incredibly short route UICP. Looking at the picture I still can't believe that those three short pieces is the complete piping kit!

http://www.extremeturbosystems.com/images/2G-Short-Route-Ultra-Race-Intercooler-1.jpg

http://www.extremeturbosystems.com/images/2G-Short-Route-Ultra-Race-Intercooler-2.jpg

http://www.extremeturbosystems.com/images/2G-Short-Route-Ultra-Race-Intercooler-3.jpg

http://www.extremeturbosystems.com/images/2G-Short-Route-Ultra-Race-Intercooler-4.jpg

Check the kit out on our site here - ETS (95-99) 2G DSM 12" Ultra Race Shortest Route Intercooler Kit (http://www.extremeturbosystems.com/Mitsubishi/Eagle-(95-99)-Eclipse/Talon-Intercoolers-and-Piping-Kits-Intercooler-Kits/c5_58_73_74/p6859/ETS-(95-99)-2G-DSM-12-Ultra-Race-Shortest-Route-Intercooler-Kit/product_info.html)

Tom

[badas93tsi]

Will this kit fit with the stock fog lights on a 97-99 Eclipse?

[Burnett03]

Will this kit fit with the stock fog lights on a 97-99 Eclipse?
I doubt it, it looks identical to an SSAC fmic kit and they don't allow foglights.

[greengoblin]

Very nice looking kit. I'd LOVE to see a short route kit like this with cast end tanks. Uber nice none the less.

Kevin

[97gstbabe]

Looks just like the slowboy/kinetic set up...

It works and allows for really short piping..``

[giganews35]

Looks Beautiful.. but the 1g guys never get any love...

Good thing I got a deal on mine Punishment Racing FMIC!

895.99 for the 3" a Lil steep but I'm sure it all wroth it!

[french_hustler]

This will be my next kit once I'm through with the SSAC.

Perfect. Thanks for thinking about us 2g guys. I was waiting for something like this for a while.

[ETS Tom]

Will this kit fit with the stock fog lights on a 97-99 Eclipse?

One of the sacrifices of going with this kit is the fog lights as no they cannot be retained. Our 2G short route kits still require zero cutting AND retain the fog lights on 2Gb cars :)


Very nice looking kit. I'd LOVE to see a short route kit like this with cast end tanks. Uber nice none the less.

Kevin

Thanks Kevin!

Looks Beautiful.. but the 1g guys never get any love...

Good thing I got a deal on mine Punishment Racing FMIC!

895.99 for the 3" a Lil steep but I'm sure it all wroth it!

Our 1G short route kits already have both outlet AND inlet facing the engine bay for the shortest possible piping :)

http://www.extremeturbosystems.com/images/1G-Race-Intercooler-Kit.jpg


This will be my next kit once I'm through with the SSAC.

Perfect. Thanks for thinking about us 2g guys. I was waiting for something like this for a while.

Glad to hear you like it! We'll have one ready when you are :)

Tom

[16G_tsi_awd]

Much better flow pattern than before. If only I would have waited :wall:

[greengoblin]

Tom,

Is getting cast end tanks an option or something that may happen in the future? I short route unit with those cast end tanks would just be a killer combo I would think.

Kevin

[jazzybeats]

Super nice man! What is the price gonna be around? (Looking now...)

[greengoblin]

It runs 995.00 for the basic kit. Add more for larger core ECT...

[K_Mans_TSI]

Do you guys do just the cores? I'd love to upgrade to a 4" core.

[giganews35]

It runs 995.00 for the basic kit. Add more for larger core ECT...

It's $895 for the 3" kit.

[Archertsi]

Wish they offered this kit before I bought my Apexi skyline delta wedge intercooler. I always liked ETS core design, but not the end tanks, these new tanks help flow through the entire intercooler, plus the size options are great.

[greengoblin]

It's $895 for the 3" kit.

That is true. I didn't see the 3" kit when I looked at it the frist time. Thanks for pointing that out.

Kevin

[The_EE]

Trade a 3" kit for a 24X9X7 Liquid to Air Intercooler? :D

Hehe I tried.

[16G_tsi_awd]

Show us a picture with bumpers on.

[A790]

Sorry, I am very new to this forum as well as to DSM's completely so I have what may be a rather stupid question. I just bought a completely stock 95 Talon TSi AWD and am looking for a FMIC to run.

Now, when I went to the order form on your site I got slightly confused- are you including a BOV with the kit (let's say I select the HKS option), or are you just having the piping set up for the BOV?

Please PM me with more information as I will be ordering parts from you quite soon. Thanks!

[The_EE]

Sorry, I am very new to this forum as well as to DSM's completely so I have what may be a rather stupid question. I just bought a completely stock 95 Talon TSi AWD and am looking for a FMIC to run.

Now, when I went to the order form on your site I got slightly confused- are you including a BOV with the kit (let's say I select the HKS option), or are you just having the piping set up for the BOV?

Please PM me with more information as I will be ordering parts from you quite soon. Thanks!

The HKS option is for the flange for your Blow off valve. As for the FMIC, if you are running a T-25 it will be over kill for your turbo, if I recall correctly.

[A790]

Sorry, I am very new to this forum as well as to DSM's completely so I have what may be a rather stupid question. I just bought a completely stock 95 Talon TSi AWD and am looking for a FMIC to run.

Now, when I went to the order form on your site I got slightly confused- are you including a BOV with the kit (let's say I select the HKS option), or are you just having the piping set up for the BOV?

Please PM me with more information as I will be ordering parts from you quite soon. Thanks!

Sorry, I misread the form the first time. I see that it's the flange. Pardon my stupidity!

[bowtiebuba355]

Do you have a sheet metal intake option?

[ETS Tom]

Tom,

Is getting cast end tanks an option or something that may happen in the future? I short route unit with those cast end tanks would just be a killer combo I would think.

Kevin

Kevin,
Pattern costs to do a cast endtank are SO high that we'd need to pick only one of the sizes to cast, and at that be 100% confident that we'd sell a TON of that kit. I don't see that being feasible on this kit but we'll see where the sales go :)


Super nice man! What is the price gonna be around? (Looking now...)

The 3" kits are $895 and only $50 more for 1/2" thickness increases from there :)


It runs 995.00 for the basic kit. Add more for larger core ECT...

The 4" kit is $995 and the smaller units are even less :D


Do you guys do just the cores? I'd love to upgrade to a 4" core.

We can do that for you! Pricing would be $645 for the intercooler only :banana:


It's $895 for the 3" kit.

;) Thanks for the help!

Wish they offered this kit before I bought my Apexi skyline delta wedge intercooler. I always liked ETS core design, but not the end tanks, these new tanks help flow through the entire intercooler, plus the size options are great.

We agree that the flow and airflow distribution characteristics through this core will be phenominal.

Trade a 3" kit for a 24X9X7 Liquid to Air Intercooler? :D

Hehe I tried.

If only :)

Show us a picture with bumpers on.

Alan @ Modified Auto Salon is receiving this kit and will be posting a full installation tutorial and finished pictures before too much longer!

Sorry, I am very new to this forum as well as to DSM's completely so I have what may be a rather stupid question. I just bought a completely stock 95 Talon TSi AWD and am looking for a FMIC to run.

Now, when I went to the order form on your site I got slightly confused- are you including a BOV with the kit (let's say I select the HKS option), or are you just having the piping set up for the BOV?

Please PM me with more information as I will be ordering parts from you quite soon. Thanks!

Feel free to PM or call me to discuss the options so we can be sure you have all the information you need to make a decision. I remember what it's like to be the new guy so don't hesitate to call for info!

Tom
360-263-3748

[VTECTHIS!]

Any way to get a kit with 3 inch piping for a SMIM?

Thanks,

Jon

[ETS Tom]

Any way to get a kit with 3 inch piping for a SMIM?

Thanks,

Jon

Jon,
Absolutely! Get in touch with me with details on your setup and we'll get that going for you :)

Tom
360-263-3748

[HIDDEN_SUN_GST]

Free bump and vouch for nice quality IC kits! http://i67.photobucket.com/albums/h290/HIDDENsunGST/May15_001.jpg
http://i67.photobucket.com/albums/h290/HIDDENsunGST/IMG_0502.jpg
http://i67.photobucket.com/albums/h290/HIDDENsunGST/20060602_IMG_0041.jpg

[this_tsi_8urv8]

I have the previous race kit version. If I wanted to "upgrade" to this new core, would I have to replacing all the piping too?

[ETS Tom]

Free bump and vouch for nice quality IC kits! http://i67.photobucket.com/albums/h290/HIDDENsunGST/May15_001.jpg
http://i67.photobucket.com/albums/h290/HIDDENsunGST/IMG_0502.jpg
http://i67.photobucket.com/albums/h290/HIDDENsunGST/20060602_IMG_0041.jpg

Man that looks great, thanks for posting those :)

I have the previous race kit version. If I wanted to "upgrade" to this new core, would I have to replacing all the piping too?

Yes this kit uses completely different piping as well as intercooler design than our pre-existing kits. If you or anyone else who has already purchased one of our intercooler kits wants to switch to this configuration I will offer a discount for returning customers :)

Tom