MindBlowin03
01-15-2008, 08:47 PM
http://img.photobucket.com/albums/v438/MindBlowin03/101_4353dsmtalk.jpg
Nick Rollison
Scranton, PA
1990 Eagle Talon TSi AWD
This is my 4th DSM and I have owned this one for about 3 years now. It showed up at my house on a flatbed with no interior and a nearly empty engine bay. Since then I have done many mods and regular maintenance to it. Pretty much every part of the car has been gone over a couple times, besides the paint. Im proud to say I have done all the work to this car on my own, with the help of some close friends of course.
Engine
- Stock rebuilt 2.0L JDM 6 bolt
- No balance shafts
- ARP headstuds
- Prothane motor mounts
- HKS 272 cams
- NGK BPR7ES spark plugs
- Magnecore spark plug wires
- Oil filter relocated
Intake & Exhaust
- 2G MAF
- JMFabrications intake manifold
- Ported 2G exhaust manifold
- PTE 57 trim turbo
- Kinetic Motorsports FMIC
- Tubular o2 housing
- Custom 3" turbo-back exhaust
- Greddy Type-S BOV
Fuel
- Walbro 255 pump
- PTE 780cc injectors
- -6an SS fuel line
- Spoolin' Up AFPR
Drivetrain & Transmission
- JNZ Tuning Rebuilt tranny
- ACT 2600 clutch
- Extended slave rod
- SS clutch line
- Homemade shifter bushings
- Shifter cable bearings
Suspension & Brakes
- Eibach Sportline springs
- KYB AGX struts
- Front upper strut bar
- Rear upper strut bar
- 97-98 Talon AWD 17x6.5 wheels
- 225/45/17 Wanli tires
- 2G OEM big brake upgrade
Electronics & Monitoring
- DSMLink
- PLX M-300 wideband o2
- Autometer Z-Series boost gauge
- Autometer Z-Series oil pressure gauge
- Summit Racing fuel pressure gauge
Other
- JMFabrications catchcan
- JMFabrications coil pack relation
- JMFabrications radiator overflow
- Tinted front head lights
- Tinted rear tail lights
- Lots of powdercoating
http://img.photobucket.com/albums/v438/MindBlowin03/101_4152dsmtalk.jpg
http://img.photobucket.com/albums/v438/MindBlowin03/101_4365dsmtalk.jpg
Nick Rollison
Scranton, PA
1990 Eagle Talon TSi AWD
This is my 4th DSM and I have owned this one for about 3 years now. It showed up at my house on a flatbed with no interior and a nearly empty engine bay. Since then I have done many mods and regular maintenance to it. Pretty much every part of the car has been gone over a couple times, besides the paint. Im proud to say I have done all the work to this car on my own, with the help of some close friends of course.
Engine
- Stock rebuilt 2.0L JDM 6 bolt
- No balance shafts
- ARP headstuds
- Prothane motor mounts
- HKS 272 cams
- NGK BPR7ES spark plugs
- Magnecore spark plug wires
- Oil filter relocated
Intake & Exhaust
- 2G MAF
- JMFabrications intake manifold
- Ported 2G exhaust manifold
- PTE 57 trim turbo
- Kinetic Motorsports FMIC
- Tubular o2 housing
- Custom 3" turbo-back exhaust
- Greddy Type-S BOV
Fuel
- Walbro 255 pump
- PTE 780cc injectors
- -6an SS fuel line
- Spoolin' Up AFPR
Drivetrain & Transmission
- JNZ Tuning Rebuilt tranny
- ACT 2600 clutch
- Extended slave rod
- SS clutch line
- Homemade shifter bushings
- Shifter cable bearings
Suspension & Brakes
- Eibach Sportline springs
- KYB AGX struts
- Front upper strut bar
- Rear upper strut bar
- 97-98 Talon AWD 17x6.5 wheels
- 225/45/17 Wanli tires
- 2G OEM big brake upgrade
Electronics & Monitoring
- DSMLink
- PLX M-300 wideband o2
- Autometer Z-Series boost gauge
- Autometer Z-Series oil pressure gauge
- Summit Racing fuel pressure gauge
Other
- JMFabrications catchcan
- JMFabrications coil pack relation
- JMFabrications radiator overflow
- Tinted front head lights
- Tinted rear tail lights
- Lots of powdercoating
http://img.photobucket.com/albums/v438/MindBlowin03/101_4152dsmtalk.jpg
http://img.photobucket.com/albums/v438/MindBlowin03/101_4365dsmtalk.jpg