ECU pin outs for 94 Expo [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum:

: ECU pin outs for 94 Expo

01-24-2008, 12:03 PM
Does anybody have a ECU Pinout diagram for the Mitsubishi Expo. This car has a 2.4L SOHC. The Pin out for the regular 4g64 will not work because the Expo has a distributor and most other 4g64s have coil packs. I have search all over for this, so if you can find it you are my hero.

01-24-2008, 12:18 PM
Here Im not sure it is the same pinouts as the expo's but the 2.4 sohc motors were also in the 7g galant that also used distributors. But also with that generation was a split, the earlier years(94-95) were obd1 with a 3 prong ecu plug the later(97-98) were obd2 with the 4 prong plug similar to the 2g ecu(plugs right in, only a few pins need to be swapped) and then there was the 96 that was 3 pronged as the earlier but is obd2.

EDIT: NVM. They dont share similar harnesses. I just tryed to cross reference the two parts and didnt get anything. Sorry I couldnt help