Now introducing JNZ Finishing!!

[11secdsm]

I'd like to take a moment to introduce a new division of ours...JNZ Finishing. From powercoating to high temp coating to media blasting to polishing....JNZ Finishing is your #1 source!

Great quality....Good pricing....Outstanding customer service....the JNZ name. What more can you ask for?

http://i21.photobucket.com/albums/b279/11secdsm/blackvcpolished.jpg

http://i21.photobucket.com/albums/b279/11secdsm/5thgearcasingmirrorblack.jpg

http://i21.photobucket.com/albums/b279/11secdsm/DSC00108.jpg

http://i21.photobucket.com/albums/b279/11secdsm/DSC00275.jpg

http://i21.photobucket.com/albums/b279/11secdsm/DSC00278.jpg

http://i21.photobucket.com/albums/b279/11secdsm/DSC00282.jpg

http://i21.photobucket.com/albums/b279/11secdsm/zo6controlarm.jpg


That's right, a RED transmission!!

http://i21.photobucket.com/albums/b279/11secdsm/DSC00326.jpg

http://i21.photobucket.com/albums/b279/11secdsm/DSC00327.jpg


For a quote on some work please give us a call at 215-997-6850. One of our sales reps will be more than happy to assist you!

[95RedRS]

Do you guys do High Temp Coatings for Manifolds?

[95RedRS]

Never mind I suck at reading.

[swade]

That Honda VC looks tits. I might have you guys do mine for my gsr.

swade

[Blizz92tsi]

WOW guys!!! All of those examples are beautiful! I don't think the transmission would look good that color, but its awesome you can do something that large. Maybe if it was a gun metal color it would be different. Any chance we could get picks of the (red) transmission in the car?

[RedDevil]

We will be doing ceramic coatings, anodizing and hard chroming in the future. Also, we're working on getting our our phone line up and working in the next few days so if anyone wants a quote until then, feel free to email us at jnzfinishingllc@yahoo.com. Thanks :)

[swade]

Let me know when the anodizing is up and going, I have lips I might want done.

swade

[willbur9788]

Everything looks AMAZING! You guys can expect a call from me in the near future for one of those valve covers. :)

[DSM Loki]

Nice stuff. I'll be calling later with a question.

[DSM_Aruba]

Sweet!! I'm low on cash now otherwise I would dig a powder coated valvecover

[11secdsm]

WOW guys!!! All of those examples are beautiful! I don't think the transmission would look good that color, but its awesome you can do something that large. Maybe if it was a gun metal color it would be different. Any chance we could get picks of the (red) transmission in the car?

I thought the same thing about the trans...but the customer wanted it. It actually didn't look half bad in a clean engine bay with a matching valve cover.

[Blizz92tsi]

Did you get a picture of the red transmission in the car? That might make the difference on how it looks. Pics or ban! J/k :) Great job on the new business venture. Can't wait to see more stuff powder coated, annodized, etc.

[K_Mans_TSI]

Judging by the size of the trans it looks like you could get a bike frame in there...;) You guys doing flat black yet?

[quazz209]

Are you guys using a booth or Infrared on your larger items?

[RedDevil]

Our oven is big enough to do ATV frames. We did Josh's brother Zach's frame about a month ago, Chris has pics of it he can post up. Came out really nice.

[K_Mans_TSI]

Flat black? ;)

I can do my swingarm but my frame is too tall to do here.

[11secdsm]

They've done a couple things in flat black actually.

[RedDevil]

We did some of the imfamous Dsmman's Ducati Monster's parts (headlight ring and some other misc. parts) in satin black. Looks really good all blacked out :)

[turbo4g63t]

That's awesome chris. A little competion for LPC? If I can find a set of stock wheels to borrow i'm trying to get my FD wheels powdercoated this spring. I would rather keep my business with you guys.

[RedDevil]

Martin@LPC does nice work, not taking anything away from him. But for us, powdercoating will just be one aspect of JNZ Finishing. We started with it because Josh already had the gun and did some coating in the past so he knew what was involved. Going forward, my focus will be the hard chrome, ceramic coating and head porting, anything that helps make power :) Powdercoating will just be one of many services we'll be offering our customers.

[tarantula]

I'm interested in anodizing the stock fuel rail for added protection with E85/Ethenol fuels. Let us know when its up.

[halucinator]

[QUOTE=11secdsm]What more can you ask for?


Free shipping on all parts done JNZ finishing style? :D

[RedDevil]

[QUOTE=11secdsm]What more can you ask for?


Free shipping on all parts done JNZ finishing style? :D

Hahaha, I don't think we're quite at that point yet :D

[RedDevil]

Chris's valve cover that was done in Candy Red w/ a silver base:

http://i21.photobucket.com/albums/b279/11secdsm/IMG_0813.jpg
http://i21.photobucket.com/albums/b279/11secdsm/IMG_0816.jpg

[RedDevil]

JNZ Finishing will be entering our 2nd phase of development in the near future. We ordered our ceramic coating last week and should be testing it out on some parts later this week. I'll post up some pics when we start the process and see how well it holds up under the most extreme conditions. Pricing will follow soon after that, along with our new website! So stay tuned! VERY EXCITE! :D

[tarantula]

JNZ Finishing will be entering our 2nd phase of development in the near future. We ordered our ceramic coating last week and should be testing it out on some parts later this week. I'll post up some pics when we start the process and see how well it holds up under the most extreme conditions. Pricing will follow soon after that, along with our new website! So stay tuned! VERY EXCITE! :D
And the Anodizing phase? Any word on that?

[RedDevil]

That will probably be next after we get the ceramic coating up and going.

[gSx-LeX]

How long does the process take, I've been toying with the idea of powder coating my valve cover black (or grey).

[11secdsm]

Normally a 2-3 day turnaround.

[dsmkamikaze]

What about a valve cover powedercoated black chrome and polished letters?

Could you PM me the info as to where to ship and stuff?

Thanks.

[RedDevil]

PM sent

[RedDevil]

Our website is officially up and running today:

www.jnzfinishing.com

Its a work in progress so we'll be adding more pics and content as we can. Feel free to check it out, any feedback is appreciated :) The pricing list should be up today or tomorrow.

[Flow-Bro]

Love the new site. I still have to send my cam gears in, I just havent been to pick them up yet

[RedDevil]

Here are some pics of the first test piece we did over the weekend. Its a friend's pipe from his quad. He should be coming down tomorrow to install it and start testing it out. The color is called "Shiney aluminum", basically a gloss silver. The finish came out nice. I'm still learning the best way to apply the coating using the airbrush but its pretty straight forward. I'll update again when we get some more feedback on it :D



http://img381.imageshack.us/img381/4607/dsc00375hy7.jpg

http://img381.imageshack.us/img381/9887/dsc00378yz3.jpg

http://img381.imageshack.us/img381/3184/dsc00376cl1.jpg

http://img381.imageshack.us/img381/2223/dsc00380hm9.jpg

http://img381.imageshack.us/img381/5784/dsc00382th5.jpg

[techboy]

Hey cool! I think my VC made the photos. It came out totally awesome. Thanks guys ...:)

[Sleeper7]

Can you PM me a price of a FP Race Manifold Ceramic Coated black?

[RedDevil]

Its been awhile so its update time! :)

We now carry a "Wrinkle Red" powder, very similar to the jDM tYte Honda valve cover color. Our first shipment should be here tomorrow or Monday.

On the ceramic front, here are afew prices on the most popular parts, soon to be up with the rest at www.jnzfinishing.com:

Stock/95/Evo/FPcast manifold - 90$
Short tubular header - 110$
Turbine housing - 45-75$
O2 housing - 45$

Turnaround time for ceramic is usually 3-5days, depending on how much prep is needed for a used part. Prices are for coating INSIDE & OUT. We currently stock a semi-gloss silver (like on the pics above) but can get gloss black and white. We also have Cermakrome, which is good to 1400deg and not really ment for turbo apps. I'm going to be testing it on my JMF manifold to see how it holds up. I'll post the results once thats done, STAY TUNED!! :D

[The_EE]

Hopefully it works out. I want my manifold looking good again heh.

Hopefully the money gods bless me so I can get my manifold done.

[11secdsm]

I uploaded a couple pics to the gallery today including some ceramic coated parts. Check em out!

http://www.jnzfinishing.com/image_gallery.php

[The_EE]

Looking good.

Cant wait until the time comes for me hehe.

[Flow-Bro]

Beautiful

[11secdsm]

Threw a couple more pics up that were done last night...check em out!

http://www.jnzfinishing.com/image_gallery.php

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1151.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1154.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1156.jpg

[Flow-Bro]

really lovin that green.

[RedDevil]

That's a Green Transparent over bonded Chrome (same as the valve cover) It came out nice but too hard IMO. Still a nice color :)

[RedDevil]

I ment to say it came out too DARK.

[Taloka34]

gorgeous, very nice :eek:

[jordanrw]

good work Joe, chris go eat McDonald's

[reddsmhatch]

another quality product.

[11secdsm]

Threw some more product pics up on the site. I'll be getting my Evo valve cover done in wrinkle red next.

http://www.jnzfinishing.com/image_gallery.php

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1185.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1184.jpg

[Don Boosted]

All the prices are up now for those wondering... pretty good value for the job done correctly.

[11secdsm]

Got a couple pieces in done in Black Chrome and Wrinkle Black last night. Check 'em out!

http://www.jnzfinishing.com/image_gallery.php

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1187.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1188.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1189.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1190.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1196.jpg

[projecTSI]

That black chrome SMIM looks pretty sweet.

[tsiowner92]

Are these all costumers products. Regarding the valve covers to you sell them premade? or would I have to send mine in? I really want to get mine done but its on the daily. :chair:

[11secdsm]

Are these all costumers products. Regarding the valve covers to you sell them premade? or would I have to send mine in? I really want to get mine done but its on the daily. :chair:

These pictures are of customer products. We will be getting valve cover cores in soon though and sending them out with core charges.

[11secdsm]

New pics....

http://www.jnzfinishing.com/image_gallery.php

High Temp ceramic coated

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1208.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1209.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1212.jpg

[11secdsm]

Here are a couple more pics of recent customer parts...


http://www.jnzfinishing.com/uploads/gallery/full/IMG_1244.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1246.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1248.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1256.jpg

http://www.jnzfinishing.com/uploads/gallery/full/IMG_1258.jpg

[95RedRS]

How Much for the Black High Temp Coating...I have the FP Manifold as well...Just looking for a price.

[RedDevil]

Cast manifolds are 90$, thats for both inside and out coated. If you just want the outside, 70$.

[tarantula]

Cast manifolds are 90$, thats for both inside and out coated. If you just want the outside, 70$.
Why would anyone want to do inside the manifold? You will never see it and it will get destroyed after the first WOT pull.:dunno:

[RedDevil]

Why would anyone want to do inside the manifold? You will never see it and it will get destroyed after the first WOT pull.:dunno:

Ceramic coating is a thermal barrier, so if you coat both the inside and out it works much better then just the outside. For a cast manifold, you can go either way considering how thick the cast is. But for tubular headers that aren't as thick, doing both is a big help. As for it falling apart, thats not really true. Its made to take temps up to 2000deg, so it won't flake off if its cured correctly. And even if it does, its not going to mess up the turbo.

[Eclipse GSX 61]

Looks like I'll eventually be going the black chrome look instead of the pure polished for the valve cover. Looks sick!

[jordanrw]

k'nex y0

[11secdsm]

Check out this baby!! You know you want it!

http://i21.photobucket.com/albums/b279/11secdsm/IMG_1304.jpg

http://i21.photobucket.com/albums/b279/11secdsm/IMG_1305.jpg

[The_EE]

Seriously Chris and Eric, How can you put out all these pictures and then expect people to decide between mods and everything else!?

I am half tempted to pull a handful of parts off my car to have you make them look nice hehe. That JMF SMIM looks effing sick.

SO now I am looking at.

Punisment manifold
JMF Smim
Water neck
Front water pipe
CAS
Strut bar
---------

$$$$$$$

:D

If you guys keep this up, I dont think I will ever be able to truly finish my car!

[RedDevil]

We call it Raspberry Pop :D

[The_EE]

We call it Raspberry Pop :D

I call everything you guys have done in this thread outstanding :D

[badas93tsi]

What base coat does that black chrome require? Can you guys do a 1 piece uicp?

[RedDevil]

What base coat does that black chrome require? Can you guys do a 1 piece uicp?

Black Chrome doesn't need a base coat but it does help depending on the substrate(material) its being applied to. I did a VC using our Ultimate Chrome powder as a base over black chrome and it come out really nice. That intake mani and VC didn't have a base coat. Also, clear coating is recommended for any chrome to protect against oxidation. A 1 piece UICP won't be a problem for us to do.

[dsm614]

Well, Another 3 months of work for my drag car after seeing this post.

[badas93tsi]

How would I get a quote for a JMF mani, valve cover, and IC pipes? What about a throttle body? I could go on and on. lol

[RedDevil]

Intake manifold - 70$ + 50% more for each additional coat (base or clear)
VC - 65$ + 50% more for each additional coat (base or clear)
IC Pipes - 2$/inch + 50% more for each additional coat (base or clear)
TB - 40$ + 50% more for each additional coat (base or clear)

[RedDevil]

The shop Evo X IC pipes in Candy Red over Chrome :)

http://i295.photobucket.com/albums/mm122/jnzfinishing/IMG_0094.jpg

My JMF tubular manifold done in chrome ceramic (polished by hand)

http://i295.photobucket.com/albums/mm122/jnzfinishing/IMG_0105.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/IMG_0104.jpg

[winterwarz]

Holy crap! That is so freaking gorgeous! Looks like I am gonna have to start selling my body to pay for these parts. I have a kidney for sale, pm me for pricing:D

[RedDevil]

LOL, our prices aren't THAT bad. I'm sure you can get your IC pipes done the same way and still keep your major organs ;)

[winterwarz]

Oh I didn't mean that your prices were bad! I was just so overwhelmed with all the beautiful parts I saw. It made me want them all done at the same time:) .
I will be a callin as soon as my intercooler gets here.:happy:

[RedDevil]

Been awhile since I had a chance to post anything besides the usual fare. Here's a fun project I got to do for a customer:

Chevy diff covers, 2 coats of Neon Pink w/ clear metallic (Bubblegum Pop :D )
http://i295.photobucket.com/albums/mm122/jnzfinishing/JNZF002.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/JNZF001.jpg

Afew pieces I played with:

Black Platinum Metallic w/ clear starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/JNZF003.jpg

Blue Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/JNZF004.jpg

[TEC]

Can you guys do Black Chrome?

[RedDevil]

Yes, there are 2 different Black Chrome powders we can get.

[flexnuts02]

I can't wait till Winter when I can get stuff coated. Oh and.. will you sell SS parts for dump tubes. Like the flange and bends and stuff. I meant to see if you had some I could grab but I got sidetracked when I was in.

[RedDevil]

I can't wait till Winter when I can get stuff coated. Oh and.. will you sell SS parts for dump tubes. Like the flange and bends and stuff. I meant to see if you had some I could grab but I got sidetracked when I was in.

Talk to Erik (greenstreak), I'm sure he could get you bends and flanges. Not sure if they have any there to sell right now though.

[flexnuts02]

Yeah I should be dropping by today to see whats up with my turbo anyway.

[TEC]

Yes, there are 2 different Black Chrome powders we can get.

OH MY! :happy:

Any samples of what they look like? I want to send you a couple of parts to do if it is what I am looking for.

[RedDevil]

OH MY! :happy:

Any samples of what they look like? I want to send you a couple of parts to do if it is what I am looking for.

Check out our gallery on the jnzfinishing.com site, we have afew parts there that are done in black chrome. As for the black chrome 2, I don't have any yet but from what I'm told, its alot closer to real "Black Chrome". I'll probably order some in next week and try it out :cool: .

[RedDevil]

Been a busy Saturday playing around with new colors :)

Soft Nickel (I really like this color, came out super smooth)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00487.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00488.jpg

Black Lava (I'm using this on my personal EVO valve cover)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00492.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00491.jpg

Anniversary Blue (looks great in the sun, lots o' metallic)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00493.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00494.jpg

RAL 2008 Orange w/ clear starlight (Just for the hell of it)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00498.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00497.jpg

[projecTSI]

That black lava looks awesome.

[Don Boosted]

Ceramic coating is a thermal barrier, so if you coat both the inside and out it works much better then just the outside. For a cast manifold, you can go either way considering how thick the cast is. But for tubular headers that aren't as thick, doing both is a big help. As for it falling apart, thats not really true. Its made to take temps up to 2000deg, so it won't flake off if its cured correctly. And even if it does, its not going to mess up the turbo.


You think it'd save a cheap ebay manifold? If it worked, it'd be pretty cheap to pick up a tubular manifold....

[RedDevil]

You think it'd save a cheap ebay manifold? If it worked, it'd be pretty cheap to pick up a tubular manifold....

Ceramic would definetely help a tubular manifold, mainly because of the thickness of the metal compared to a cast piece.

[RedDevil]

Afew pieces I did lately:

Sparkle Granny Smith w/ Glass Clear
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00524.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00523.jpg

Jollipop Copper with polished letters
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00513.jpg

[RedDevil]

** New Pricing **

With fall right around the corner, we decided to lower some of the prices on the more popular items, just in time for those of you starting your winter projects :D .

Intake/IC piping - was 2$/inch NOW 1$/INCH
Bolt heads - was 2$ NOW .50
Brackets : small - was 7.50 NOW 5.00
medium - was 15.00 NOW 8.00
large - was 20.00 NOW 12.00
Coil spring - was 30.00 NOW 20.00
Intake manifold : 4cyl - was 70.00 NOW 60.00
: 6&8cly (2pc) - NOW 90.00
Sway bar - was 2$/inch NOW 1$/INCH
Transmission pan - was 45.00 NOW 30.00
Turbo compressor cover - was 35.00 NOW 25.00
Valve cover: 4cyl - was 65.00 NOW 50.00
-Inline 6 - was 80.00 NOW 60.00
- V6 - was 90.00/pair NOW 60.00/PAIR
-V8 - was 90.00/pair NOW 70.00/PAIR
- Polished letters - was 20.00 NOW 15.00
DSM trans - was 100.00 NOW 50.00 (blasting case is 100.00)
Engine block: 4cyl - 100.00
6cyl - 150.00
8cyl - 200.00

There is still a 50% additional charge for base/top/multipule coats.

As usual, if you have any questions, please PM or email me. Thanks!

[RedDevil]

Some people have asked about wheel pricing, so here are the NEW prices :D !

13" - 35/each
14" - 40/each
15" - 45/each
16" - 55/each
17" - 65/each
18" - 75/each

These prices include all the stripping/prep/coating. If you send wheels already stripped/blasted, the price will be less.

[RedDevil]

New ceramic color: 2000deg. Titanium gray

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00584.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00585.jpg

Silver texture w/ gloss black letters:

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00586.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00589.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00588.jpg

[flexnuts02]

You lowered the prices!!!:D you will be getting some of my stuff hopefully very soon:tree:

[RedDevil]

Yes sir, just trying to keep our customers happy :D

[RedDevil]

New Black Chrome powder over Ultimate Chrome :D

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00594.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00595.jpg

[Got Insulin?]

New Black Chrome powder over Ultimate Chrome :D

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00594.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00595.jpg


8===>

I want.....

[liquidnote]

Martin@LPC does nice work, not taking anything away from him. But for us, powdercoating will just be one aspect of JNZ Finishing. We started with it because Josh already had the gun and did some coating in the past so he knew what was involved. Going forward, my focus will be the hard chrome, ceramic coating and head porting, anything that helps make power :) Powdercoating will just be one of many services we'll be offering our customers.


Haha you tell them chris! or is this joe?

Yea man there is no competition between the two of us we actually work together and send each other customers depending on whats going on. I think JNZ Finishing does great work keep it up fellas!

Martin

[RedDevil]

Thanks Martin :) This is Joe.

[liquidnote]

Thanks Martin :) This is Joe.

Hey Joe! i will be seeing you guys this week some time bringing the 1g so you guys can check it out!

[greenstreak]

Liquidnote! I think this is the first time I have seen you on Talk my friend.

[lazylaser]

For months I have trying to figure out what all I want covered in Jollipop Copper!

That color has seriously been on my mind since the day the picture was posted.

[Revolution]

Nice work guys!

[RedDevil]

For months I have trying to figure out what all I want covered in Jollipop Copper!

That color has seriously been on my mind since the day the picture was posted.

Its definetely a cool color. Depending whether you do a chrome base or not, really affects the finish. That one I posted had a chrome base, w/o it the color would be darker, more like real copper.

[TheyCallMe Tim]

Want shaved VC in wrinkle black... :really:

[RedDevil]

Want shaved VC in wrinkle black... :really:

We'd be happy to help you out there ;)

[Ericy321]

Prices still current. What's the turnaround on stuff shipped in? Price on Ceramic coating inside and out of a turbo manifold?

[RedDevil]

Prices still current. What's the turnaround on stuff shipped in? Price on Ceramic coating inside and out of a turbo manifold?

Turnaround for powdercoating, depending on the part, is 2-4 days plus shipping. Ceramic is 3-5 plus shipping. Cast manifolds are 90$ and tubular 110-150 depending on size. Chrome ceramic is more since it has to be polished.

[RedDevil]

GVR4 IC pipes is Mirror Black - smooth as a baby's butt :D
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00606.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00607.jpg

GVR4 Strut bar in Silver Vein w/ Candy Red ends
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00613.jpg

Datsun 280Z intake in Candy Blue over Ultimate Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00611.jpg

[RedDevil]

Wrinkle Black madness!! Custom IC pipes and other misc. parts from a 300ZX
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00623.jpg

2 tone black w/ orange bike wheels
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00629.jpg

[Magapaka]

Out of curiousity, along with the hard chrome will you be able to do black chrome?

[RedDevil]

EVO MR BBS wheels done in Triple Bronze. Going on our tech's GVR4 :)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00637.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00638.jpg

[RedDevil]

Neon Green Enkei rims
http://i295.photobucket.com/albums/mm122/jnzfinishing/SDC10235.jpg

Black Starlight w/ Red Sparkle additive
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00664.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00663.jpg

Black Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00671.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00670.jpg

[greenstreak]

What, no pics of those sweet Nissan Orange wheels that I saw in the shop?

[RedDevil]

Mirror Black w/ Mirror Red Mitsu symbol
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00697.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00696.jpg

Silver Vein
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00699.jpg

Gloss Black ceramic
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00701.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00702.jpg

Texture Silver
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00703.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00704.jpg

[tarantula]

Mirror Black w/ Mirror Red Mitsu symbol
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00697.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00696.jpg


Really Nice!! Can you do only the letters without touching anything else? I have a Polished valve cover that would liik great with just the letters in RED.

[RedDevil]

I've never done that but I can imagine it would be tough, since you'd have to make sure you got every little spot of powder off the VC before you baked it. I could try it but it would probably more expensive then a regular coat job.

[JNZTuning]

Just wanted to extend another discount out there:
Anyone who sends in a 4G63 Valve Cover for powder coating is eligible for the following package price:
Valve cover gasket, set of 4 spark plug well gaskets & a metal half moon seal will be sent back along with your new shiny valve cover.

No if you were to go down to your local Satan this would be over $66. Normally ordering the above from us would be about $52. With the valve cover service it will be lowered even further to $48.32!

[Ericy321]

Will be sending stuff as soon as I can finish shaving this valve cover.

Prices are still good?

[RedDevil]

Will be sending stuff as soon as I can finish shaving this valve cover.

Prices are still good?

Yup, everything price-wise is still current.

[Ericy321]

Perfect. Should have some coming to you in a couple weeks and more when I get my intercooler piping all done. Great work!

[RedDevil]

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00744.jpg

Want cores? We got cores! DSM, 1 smooth Hyundai, shaved, we can do it! Now you don't have to wait for your VC to come back. Place your orders while they last. I have more coming :D.

[RedDevil]

Red Fine Texture
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00750.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00753-1.jpg

Green Metallic
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00748.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00752.jpg

[RedDevil]

Afew pieces from the last week:

Wrinkle Red
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00769.jpg

Violet Transparent over Ultimate Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00767.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00768.jpg

Mirror White w/ Mirror Black letters
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00762.jpg

Purple Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00764.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00765.jpg

[RedDevil]

Afew pieces from the last week:

Intense Blue over Silver
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00797.jpg

Candy Red over Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00792.jpg

Black Chrome w/ Wrinkle Red letters
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00782.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00783.jpg

Flat black hi-temp powder
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00786.jpg

[RedDevil]

For the quad riders out there. 2 frames for 2 separate projects at the shop.

Red Starlight over Bonded Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/frame1.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/frame2.jpg

Candy Blue over Bonded Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00802.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00805.jpg

The red frame is for a Banshee that we're coating pretty much every part that can be coated in either the red or black starlight, chrome, silver or wrinkle black. Should really be nice when its done w/ black plastics.

[Eclipse GSX 61]

What is something that is capable of striping powdercoat? I'm just curious how strong it is against chemicals and wear.

[greenstreak]

It is hard to strip even when you want to. JNZ Finishing has a special chemical bath to strip powdercoated parts and it takes days to get it off.

[Eclipse GSX 61]

Sounds good to me. So if you were to put something like simple green on it, it would hold its shine and look?

[iDsm]

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00805.jpg

The red frame is for a Banshee that we're coating pretty much every part that can be coated in either the red or black starlight, chrome, silver or wrinkle black. Should really be nice when its done w/ black plastics.[/QUOTE]

The blue frame is for a YFZ450 if I am not mistaken. Correct? lol

[Moparismylife]

Erik...remember the grannysmith green valve cover I bought from you guys....yeah shes looking sexy but before I show all pics of this. I need something from you guys. I've decided to go green in black in the engine bay. So do you have a pic or a sparkly black to go with the granny smith green valve cover???? Im goign to get a spark plug cover in that black.....And could you pm me what you come up with? Id apprciate it Erik. And also...will these coatings hold up to exhuast heat??? Like if I were to powder coat my FMIC piping and intake manifold ???? thanks sir
Cory

[RedDevil]

Erik...remember the grannysmith green valve cover I bought from you guys....yeah shes looking sexy but before I show all pics of this. I need something from you guys. I've decided to go green in black in the engine bay. So do you have a pic or a sparkly black to go with the granny smith green valve cover???? Im goign to get a spark plug cover in that black.....And could you pm me what you come up with? Id apprciate it Erik. And also...will these coatings hold up to exhuast heat??? Like if I were to powder coat my FMIC piping and intake manifold ???? thanks sir
Cory

Here's a VC done in Black Starlight, which is what you'd want to go with that VC you have:

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00732.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00734.jpg

[greenstreak]

I can do either a JMF basic or delux aluminum cover like seen on the white cover above and coat it in something like you see above. :) Intercooler pipes and the intake manifold will hold up great as they don't get all that hot. I'll PM you prices on everything once I get into JNZ.

[zckry]

What kind of white color's do you guys offer on the valve covers?
You guys can shave the letter also correct? If so, how much extra is that?

[RedDevil]

What kind of white color's do you guys offer on the valve covers?
You guys can shave the letter also correct? If so, how much extra is that?

We have a regular gloss white, then theres textured white, white vein and metallic white. Shaving is usually around 50$ extra, about 40 mins worth of work.

[zckry]

We have a regular gloss white, then theres textured white, white vein and metallic white. Shaving is usually around 50$ extra, about 40 mins worth of work.

Awesome, do you guys have any photos of any of those white's?
I didn't see any except one on an evo valve cover in this thread.

[RedDevil]

Awesome, do you guys have any photos of any of those white's?
I didn't see any except one on an evo valve cover in this thread.

I don't have any samples done in any white besides gloss. I'm doing an Evo VC and intake pipe in textured white soon though, once the powder arrives. You can go to www.powderbuythepound.com and check out their whites, those are the main ones I can get.

[zckry]

I don't have any samples done in any white besides gloss. I'm doing an Evo VC and intake pipe in textured white soon though, once the powder arrives. You can go to www.powderbuythepound.com and check out their whites, those are the main ones I can get.

I would love to see how that comes out, when you finish that could you please post it on here?

[RedDevil]

Will do :D

[Moparismylife]

Erik or Red...hey do you guys have any sparkplug covers like the deluxe ones that have no engravings on them??? Id like to have a custom engraving...and then have you powdercoat the starlight black you said goes with the grannysmith green. I think this would be great.
PS sorry it took so long to reply....my resturant buisness has been crazy.

[RedDevil]

Erik or Red...hey do you guys have any sparkplug covers like the deluxe ones that have no engravings on them??? Id like to have a custom engraving...and then have you powdercoat the starlight black you said goes with the grannysmith green. I think this would be great.
PS sorry it took so long to reply....my resturant buisness has been crazy.

I'm pretty sure we can get blank covers from JMF and he can do custom engravings, not sure of pricing on that though. Probably your best bet is to call the shop and talk to Erik or Paul directly.

[this_tsi_8urv8]

What colors do you guys have?
I also have a chrome plated, that I would like to be changed. Perhaps black with red/polished lettering. Quote on that.

[RedDevil]

What colors do you guys have?
I also have a chrome plated, that I would like to be changed. Perhaps black with red/polished lettering. Quote on that.

We stock about 30 colors right now. As for black, we have satin, wrinkle, gloss and high gloss, just let me know which you'd like :D

[RedDevil]

New addition to the shop: Dedicated ceramic oven :)

http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00828.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00829.jpg

Been in the works for the last 2 weeks and now its 99% done, just waiting for the temp controller to arrive tomorrow. Josh and Justin deserve the credit for getting everything together so well. I know alot of you guys have been asking me about ceramic lately and I was holding off until this was done. Our regular powder coating oven didn't really get hot enough to fully cure the ceramic. This one should get to 750+ w/o much problem.

[Moparismylife]

Hey Erik or RED...Ive got a real freaking problem. I was out of town and I had some car issues. I wasnt able to bring it to my local dsm mechanic as I was out of town. Well he changed my oil and such since I told him too whle we were at it. Long story short...Im leaking oil massively on the granny green cover you did for me. When I yank this sucker off, what should I clean it off with??? lol I wont use brake cleaner like I do everything else, except the bottom. Also I have a feeling the f^cker may have tightened it to much and may have cracked it....also the kicker is...he didnt use rtv sealant on the gasket !!!!!

[MitsuModder]

Why do you (JNZ) not return calls/messages left?

[RedDevil]

Why do you (JNZ) not return calls/messages left?

What # were you calling? The Finishing or Tuning side?

[RedDevil]

Wrinkle Black JMF custom surge tank and intake pipe
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00890.jpg

Neon Pink JNZ EVO X spark plug cover
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00881.jpg

Wrinkle Red
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00882.jpg

Neon Green w/ Wet Black letters and oil cap
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00878.jpg

Red Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00857.jpg

Vermillion Splash w/ Glass Clear (hard to tell but this color has ALOT of orange/copper pearl)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00843.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00845.jpg

Bavarian Silver
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00838.jpg

Texture White
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00813.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00812.jpg

Mirror Red
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00814.jpg

[zckry]

Damn that texture white VC is exactly what I want!
Okay, so my request is a bit odd but I have a "JDM" VC for my GSX and would like the "DOHC" and "16 Valve" shaved off but I still want the "Mitsubishi" on it.
I would want the "Mitsubishi" letters wet black.
And the rest, of course, coated that ^ texture white.
So how much that cost all together?
I wasn't sure because I didn't want all of the letters shaved.

[RedDevil]

Shaving a VC is usually 45 mins or so @ 85$/hr, so doing only half of it probably 20 mins. Then the black letters would be 15$ and the white 50. I'd have to check and see if I still have some left from that Evo VC I did, if not, it would be about 20$ to order it in.

[RedDevil]

Yardman Green Metallic
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00940.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00942.jpg

Sparkle Granny Smith w/ Glass Clear
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00936.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00938.jpg

Chevy Orange
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00934.jpg

40% Gloss Black
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00920.jpg

Turbotrix custom manifold in Satin Black ceramic
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00912.jpg

[swade]

What do you think the faces and lips of a 3 pc 16'' wheel would run? 2 colors and maybe a clear...

swade

[greenstreak]

He'll be able to give you a pretty good idea on cost shortly. He is in the process now of completing a similar request for a local racer.

[Ripper_XX]

shoot after seeing the Wrinkle Red VC I gota have me some of that shit! LOL. Seriously though, do you have any pics of DSM valve covers in Wrinkle Red? shaved and unshaved? SERIOUSLY considering that one.


When I get my short route aluminum IC piping done I am sooo sending it to you guys... got Wrinkle Black?

[greenstreak]

We've got wrinkle everything. :) I'm sure Joe can post up some wrinkle red for you when he gets in this afternoon. You can find a few examples of wrinkle black in this thread.

[D_Eclipse9916]

Will you guys be offering Hard anodizing? I need some suspension mounts done along with some wrinkle black on some stuff.

[RedDevil]

Will you guys be offering Hard anodizing? I need some suspension mounts done along with some wrinkle black on some stuff.

We can get anodized powders now. Looks just like real anodizing except as strong as powder coat :) Its a 2 stage ment to be done over chrome/polished alum or chrome powder. There are about 10 different colors.

[D_Eclipse9916]

hahah naw, I need it to be done to strengthen the metal for the suspension mounts.

I will have you guys do some parts in some wrinkle black in about 2 weeks.

[RedDevil]

Been busy lately but here are afew nice parts I just did:

Candy Blue over Ultimate Chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00965.jpg

Bavarian Silver w/ gloss black and blue letters
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00961.jpg

Satin Black lip w/ Triple Bronze centers
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00952.jpg

[RedDevil]

Its been far too long since I updated this thread, so here goes!

Solar Rain over real chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01010.jpg

Bright Green
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01009.jpg

Candy Red over UC
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01016.jpg

Mirror Black
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01014.jpg

Wrinkle Red and Black Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00999.jpg

Mirror Red
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01002.jpg

Gloss Black w/ UC lips
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01022.jpg

Blue Transparent over UC
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01027.jpg

Deep Red Transparent over Wheel Silver
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01033.jpg

[RedDevil]

Solar Rain over real chrome
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01010.jpg

Bright Green
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01009.jpg

Candy Red over UC
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01016.jpg

Mirror Black
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01014.jpg

Wrinkle Red and Black Starlight
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC00999.jpg

Mirror Red
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01002.jpg

Gloss Black w/ UC lips
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01022.jpg

Blue Transparent over UC
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01027.jpg

Deep Red Transparent over Wheel Silver
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01033.jpg

[RedDevil]

A sweet set of Volks I did the other day. Apparently the only set in the country this size: 19x10 w/ a 12mm offset.

Started off like this
http://img190.imageshack.us/img190/7858/dsc0002bp.jpg

Ended up like this - Black Magic :D
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01059-1.jpg

[iDsm]

OH man those wheels look amazing!!! You guys do AMAZING work!!

[16g-95GSX]

I've been very happy with the wrinkle black on the custom surge tank and intake pipe shown on the last page (they are mine obviously). I just sent them a valve cover to be done in silver vein with some AN fittings added in for breather ports, I expect good things once again.

[swade]

He'll be able to give you a pretty good idea on cost shortly. He is in the process now of completing a similar request for a local racer.

Any updates?

[RedDevil]

Any updates?

Do you have a pic of the wheels and how you want them done?

[RedDevil]

Desert Gold Ore (Wrinkle Black w/ Gold metallic)
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01187.jpg

Silver Explosion
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01182.jpg

[DSM Loki]

I needs me a gold ore vc...

[JNZTuning]

The gold ore actually looks more uneven then it is in that picture too. The camera doesn't pick up the gold the same way because of the texture of the coating. We just did a customer's 18" Enkies in that gold ore and they are pretty awesome actually.

[swade]

Do you have a pic of the wheels and how you want them done?

Wow, dont know where I have been.

http://i13.photobucket.com/albums/a255/dsm-swade/001.jpg

http://i13.photobucket.com/albums/a255/dsm-swade/142241811_465610976_0.jpg

http://i13.photobucket.com/albums/a255/dsm-swade/003.jpg

swade

[RedDevil]

You'd probably be looking in the 75-85/wheel range depending on color(s).

[rad_dsm]

Do you have a sample of the red anodized or does it look the same as the candy red over chrome?

Thanks

[RedDevil]

Do you have a sample of the red anodized or does it look the same as the candy red over chrome?

Thanks

Ya its basically the same thing except its flat instead of glossy. Same 2 stage process as well (done over chrome powder, real chrome or polished alum). I did a fuel rail afew weeks back but didn't take a pic of it. Its pretty close to real anodizing, especially if done over real chrome or polished alum.

[swade]

Would be two colors, prolly pretty simple colors. lol

swade

[swade]

Have any more pics of the Silver explosion wheel you did? Like without the center? It looks similar to mine and we havent been able to ID mine.

swade

[RedDevil]

Have any more pics of the Silver explosion wheel you did? Like without the center? It looks similar to mine and we havent been able to ID mine.

swade

Thats the only pic I took. They are apparently old school BBS wheels from a VW that are worth alot of $ from what I've been told, probably because of the size. The center has a large threaded part, like it has one big lug nut that holds it on.

[RedDevil]

Illusion Violet w/ silver ceramic JMF heatshield
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01240.jpg

Iron Gunmetal w/ Glass Clear
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01337.jpg
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01339.jpg

Bubblegum Pop
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC01211.jpg

Sun Gold w/ Glass Clear
http://i295.photobucket.com/albums/mm122/jnzfinishing/DSC_0016-1.jpg

[RedDevil]

We also have 3 DSM VC cores in stock as of today (10/12). The cost of a single stage VC w/ polished letters would be 140 and 165 for a dual stage plus shipping. Shaving the VC down completely is about 85$ as well if anyone wants that.

[DSM Rook]

Thanks for getting that iron gunmetal cover done for me. Hope your other thing went well.

[JNZTuning]

http://i50.photobucket.com/albums/f306/JNZTuning/General/DSC01100.jpg

http://i50.photobucket.com/albums/f306/JNZTuning/General/DSC01102.jpg

http://i50.photobucket.com/albums/f306/JNZTuning/General/DSC01105.jpg

http://i50.photobucket.com/albums/f306/JNZTuning/General/HillsValveCover.jpg

[JNZTuning]

We're also going to be keeping a stock DSM valve cover in stock for a core exchange program like we do with the Evo Xs.

The core program will work like this:

You order the core done in any fashion you'd like, pay for the powdercoating work and put a $60 deposit down on the core and we ship the cover out to you.

You swap the valve cover onto your car, box up your old one and ship it back to us within one week. This means that within one week of you receiving it we have a valid tracking # showing that it's on its way back to us.

Once received and checked for cracking, etc., your core is then refunded to you.

This is to help out the guys who don't want/can't have down-time on their cars.

The only note to this is that you HAVE to make sure that the core you return to us is in good condition; no cracks, broken tabs or bolt holes, debris in the inside from a blown motor, or stripped threads, etc., as we have to then use that core for the next customer and won't be able to if it's damaged.

[dsmusmc]

http://i50.photobucket.com/albums/f306/JNZTuning/General/HillsValveCover.jpg

What are you asking for this and do you except shaved valve covers?

[RedDevil]

That VC was done for a customer but something like that w/ those bungs and 2 different powders would be 75 for the coating, 65-85 for the welding plus the fittings, 35 for the core and shipping. So you're looking in the 230$ area total.

[RedDevil]

We're currently working on getting a good amount of DSM cores in w/n the next week or so. If anyone wants to go with a core, you won't have to worry about down time :grin: