Jp90Talon
04-21-2008, 09:30 PM
Well I bought this car from a local DSMr about 3 years ago as a rolling chassis after he got fed up with it and decided to part it out. I have slowly been piecing it back together.
Pics before I bought it (before it was parted out and parked under a pine tree for over a year.)
http://img.photobucket.com/albums/v451/BBBJustin/PTR20006.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20002.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20001.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20004.jpg
Bay after a little cleaning
http://img.photobucket.com/albums/v451/BBBJustin/MVC-669F.jpg
Engine installed
http://img.photobucket.com/albums/v451/BBBJustin/MVC-747F.jpg
FMIC
http://img.photobucket.com/albums/v451/BBBJustin/MVC-749F.jpg
Bay
http://img.photobucket.com/albums/v451/BBBJustin/MVC-800F.jpg
Battery relocation
http://img.photobucket.com/albums/v451/BBBJustin/MVC-759F.jpg
Kill switch
http://img.photobucket.com/albums/v451/BBBJustin/MVC-760F-1.jpg
Gauges
http://img.photobucket.com/albums/v451/BBBJustin/100_0026.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-799F.jpg
K-sports
http://www.dsmtalk.com/gallery/data/500/medium/100_01631.jpg
15 gal fuel cell
http://www.dsmtalk.com/gallery/data/500/medium/100_0173.jpg
Hatch waiting for paint and lexan
http://img.photobucket.com/albums/v451/BBBJustin/MVC-754F.jpg
Doors
http://img.photobucket.com/albums/v451/BBBJustin/MVC-763F.jpg
Ram air intake
http://img.photobucket.com/albums/v451/BBBJustin/MVC-769F.jpg
Few shots with The Darkness
http://img.photobucket.com/albums/v451/BBBJustin/100_0087.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0091.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0092.jpg
Random shots
http://img.photobucket.com/albums/v451/BBBJustin/MVC-812F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-814F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-816F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-818F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-820F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0067.jpg
Mods so far
-Magnus smim
-Magnus billet fuel rail
-Magnus IM heat barrier gasket
-DN performance trubular exaust manifold
-VP tubular o2 housing with Tial 40mm external gate
-TRE race tranny
-Jay racing alternator relocation kit*
-Fidanza Flywheel
-ACT 2600 with sprung 6 puk
-Full polyurathane motor mounts
-Haltech E6K
-Buschur COP setup
-MSD dis2
-AEM wideband o2
-Greddy TT
-880cc inj
-SBR FMIC
-an-6 fuel feed lines
-Braided SS brake lines
-Braided SS oil feed/return
-Aeromotive FPR
-walbro 255hp pump
-VIS Racing CF Hood
-Buschur 3" turboback
-Tial 50mm bov
-Autometer Boost Gauge
-Autometer EGT Gauge
-Nordskog FP Gauge
-Nordskog Oil PSI gauge
-Nordskog Water Temp gauge
-Fidanza short throw shifter
-Battery recocated to the trunk
-92-94 Talon Rear bumper/light conversion
-Fluidyne radiator
-Slimline fan
-Black Recaro racing seats and harnesses
-No Metal Bumpers
-No AC
-No Cruise
-No Power Steering
-Weight reduction to the max
-Rota Slipstreams with Hoosier quicktime pros for the track and Rx-7s with Eagle F1's for the street.
For track use only...
-3" exaust out the driver fender
-Gutted manual window doors
-Gutted spoilerless hatch with lexan
-3" Ram intake through passenger side headlight
Waiting in my garage
-Eagle/Ross block
-BS elim kit
-Race built/ported head
-4pt race cage
-K-sport coilovers
Pics before I bought it (before it was parted out and parked under a pine tree for over a year.)
http://img.photobucket.com/albums/v451/BBBJustin/PTR20006.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20002.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20001.jpg
http://img.photobucket.com/albums/v451/BBBJustin/PTR20004.jpg
Bay after a little cleaning
http://img.photobucket.com/albums/v451/BBBJustin/MVC-669F.jpg
Engine installed
http://img.photobucket.com/albums/v451/BBBJustin/MVC-747F.jpg
FMIC
http://img.photobucket.com/albums/v451/BBBJustin/MVC-749F.jpg
Bay
http://img.photobucket.com/albums/v451/BBBJustin/MVC-800F.jpg
Battery relocation
http://img.photobucket.com/albums/v451/BBBJustin/MVC-759F.jpg
Kill switch
http://img.photobucket.com/albums/v451/BBBJustin/MVC-760F-1.jpg
Gauges
http://img.photobucket.com/albums/v451/BBBJustin/100_0026.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-799F.jpg
K-sports
http://www.dsmtalk.com/gallery/data/500/medium/100_01631.jpg
15 gal fuel cell
http://www.dsmtalk.com/gallery/data/500/medium/100_0173.jpg
Hatch waiting for paint and lexan
http://img.photobucket.com/albums/v451/BBBJustin/MVC-754F.jpg
Doors
http://img.photobucket.com/albums/v451/BBBJustin/MVC-763F.jpg
Ram air intake
http://img.photobucket.com/albums/v451/BBBJustin/MVC-769F.jpg
Few shots with The Darkness
http://img.photobucket.com/albums/v451/BBBJustin/100_0087.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0091.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0092.jpg
Random shots
http://img.photobucket.com/albums/v451/BBBJustin/MVC-812F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-814F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-816F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-818F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/MVC-820F.jpg
http://img.photobucket.com/albums/v451/BBBJustin/100_0067.jpg
Mods so far
-Magnus smim
-Magnus billet fuel rail
-Magnus IM heat barrier gasket
-DN performance trubular exaust manifold
-VP tubular o2 housing with Tial 40mm external gate
-TRE race tranny
-Jay racing alternator relocation kit*
-Fidanza Flywheel
-ACT 2600 with sprung 6 puk
-Full polyurathane motor mounts
-Haltech E6K
-Buschur COP setup
-MSD dis2
-AEM wideband o2
-Greddy TT
-880cc inj
-SBR FMIC
-an-6 fuel feed lines
-Braided SS brake lines
-Braided SS oil feed/return
-Aeromotive FPR
-walbro 255hp pump
-VIS Racing CF Hood
-Buschur 3" turboback
-Tial 50mm bov
-Autometer Boost Gauge
-Autometer EGT Gauge
-Nordskog FP Gauge
-Nordskog Oil PSI gauge
-Nordskog Water Temp gauge
-Fidanza short throw shifter
-Battery recocated to the trunk
-92-94 Talon Rear bumper/light conversion
-Fluidyne radiator
-Slimline fan
-Black Recaro racing seats and harnesses
-No Metal Bumpers
-No AC
-No Cruise
-No Power Steering
-Weight reduction to the max
-Rota Slipstreams with Hoosier quicktime pros for the track and Rx-7s with Eagle F1's for the street.
For track use only...
-3" exaust out the driver fender
-Gutted manual window doors
-Gutted spoilerless hatch with lexan
-3" Ram intake through passenger side headlight
Waiting in my garage
-Eagle/Ross block
-BS elim kit
-Race built/ported head
-4pt race cage
-K-sport coilovers