STM Radiator brackets = sexy [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: STM Radiator brackets = sexy


HuBerT
11-07-2008, 02:42 PM
FINALLY!!! stamped steel is really ugly. These, are pure sex.

Check them out. I'm waiting for the anodized ones I think.

http://www.streettunedmotorsports.com/parts/stm_2g_dsm_radiator_brackets.htm

Black94DSM
11-07-2008, 02:45 PM
Holy crap thats expensive for just radiator brakets! To each his own.

The_EE
11-07-2008, 02:52 PM
If only, if only someplace made a bracket that fits a 2g but is wide enough for a 1g radiator.

96CFGST
11-07-2008, 03:11 PM
Looks sweet. Money is better spent elsewhere. I still want em.

ApexImprt2nR
11-07-2008, 03:25 PM
Beautiful pieces. I would definitely buy them if I had extra cash laying around.

Gamble
11-07-2008, 03:41 PM
I have hayame ones, w00t for being original.

eviltsi
11-07-2008, 05:47 PM
Great piece for sure!!!

empie1
11-08-2008, 07:19 AM
80$??? What a fuckin joke.

TrboANTsi
11-08-2008, 10:50 AM
Word, I have the Hayame and its chrome for about $50. Too bad they dont make em anymore, those are still nice pieces though.

Emery@stm
11-08-2008, 10:53 AM
80$??? What a fuckin joke.


Its to bad you feel that way. Unfortunately that is what they cost us to make these and the price will eventually go up unless we find a cheaper machine shop... I personally like them and bought a set for our 2g. I understand that 80.00 is a big investment for alot of people and I would rather see them use there money where it is better fit.

Although sometimes this type of response is what makes companies not want to produce and design new products for these cars, We will push on for those who are actually interested...

Thanks
-Emery

Marq97GSX
11-08-2008, 10:59 AM
Been waiting for these. They look nice!

ryan93talon
11-08-2008, 11:14 AM
80$??? What a fuckin joke.$80 is nothing.

empie1
11-08-2008, 04:34 PM
Its to bad you feel that way. Unfortunately that is what they cost us to make these and the price will eventually go up unless we find a cheaper machine shop... I personally like them and bought a set for our 2g. I understand that 80.00 is a big investment for alot of people and I would rather see them use there money where it is better fit.

Although sometimes this type of response is what makes companies not want to produce and design new products for these cars, We will push on for those who are actually interested...

Thanks
-Emery



Im well aware of supply and demand rules.I highly doubt your paying a machine shop 80$ each set.If thats the case, how are you making a profit? lol...Either way, my point is, 80$ for pointless mods is a joke.They look nice, minus the stm advertisement.We all have opinions. Good luck selling them (not being sarcastic).

Emery@stm
11-08-2008, 05:11 PM
Im well aware of supply and demand rules.I highly doubt your paying a machine shop 80$ each set.If thats the case, how are you making a profit? lol...Either way, my point is, 80$ for pointless mods is a joke.They look nice, minus the stm advertisement.We all have opinions. Good luck selling them (not being sarcastic).


You hit the nail on the head (STM LOGO), Thats where we make money in the long run. Its free advertising. And yes they do cost 80.00 a set to make. These are done on a 3D program and to make 6 sets its is about 36 hours of machine time.

Thanks
-Emery

The_EE
11-08-2008, 05:16 PM
Can you make brackets that bolt onto a 2g but would hold a 1g radiator, the spaces on them are different.

A 2g radiator wont work with my setup as the radiator line is too close to the manifold.

Photos coming in a second of what I mean.

The_EE
11-08-2008, 05:23 PM
Here is how it looks with a 1g radiator on a 2g, the brackets are a little farther in instead of out.. lol.. memory failed me. You can see what I mean on the left radiator mount bracket.

http://i38.photobucket.com/albums/e119/The_EE/stuffs004.jpg
http://i38.photobucket.com/albums/e119/The_EE/RearDiff004.jpg

Emery@stm
11-08-2008, 06:42 PM
Sorry we cant. It would be waaayyy to expensive to have the program wrote for one set.


-Em

TEC
11-08-2008, 06:46 PM
Sorry we cant. It would be waaayyy to expensive to have the program wrote for one set.


-Em

All you would need to do is ask the machine shop not to cut the bolt holes and sell them that way. Then the end user can place the holes anywhere they want.

Emery@stm
11-08-2008, 07:11 PM
All you would need to do is ask the machine shop not to cut the bolt holes and sell them that way. Then the end user can place the holes anywhere they want.


That would be easy if it were not in the middle of the front side program. The holes are cut at the same time as the front of the part.

-Emery

IggyBcool
11-27-2008, 10:50 AM
Well there was my problem. I had a 1g radiator on my car............ EE what manifold is that?

The_EE
11-27-2008, 10:53 AM
Punishment Racing, DSM Flanged Stainless Steel Tubular ( no longer made ).

Audioxtremes
11-28-2008, 08:19 PM
Not to be rude but whoever is telling you it takes 6 hours to make that has terrible skills, or is using some old ass cnc. The machines next door would turn that part out 20 an hour.

tmonttt
11-28-2008, 08:53 PM
i would like to get a set for my 2g

Emery@stm
12-02-2008, 07:04 PM
More of these are on the way! Get them while you can.

-Emery

SexyDSM95
12-04-2008, 12:36 PM
Would you use re-use the rubber guts?

I found these...may try them if they are only $10
http://4caroption.com/product.php?pid=728

Emery@stm
12-04-2008, 12:56 PM
Would you use re-use the rubber guts?

I found these...may try them if they are only $10
http://4caroption.com/product.php?pid=728

Just added those to cart to see what the price is. They are not bad at all for 40.00 shipped. The price they have is each one. There is two to a set. Again not a bad price at all...

-Emery

Sebba
12-04-2008, 02:02 PM
I wish I had access to the old CNC machine....

harry99GSX
12-04-2008, 04:46 PM
I kind of doubt that place above ^^^^^^ even has the Hayame brackets in stock.

Most places that still have them listed on there website don't actually have them in stock though.

I would love for a place to just make a PLAIN CNC'ed aluminum radiator bracket. NO names, lettering, etc.

eder-loco
12-06-2008, 10:23 AM
Holy crap thats expensive for just radiator brakets! To each his own.

werd, just what i was thinking

K_Mans_TSI
12-06-2008, 10:55 AM
I'd buy a set without bolt holes as well, I'd hate to have to hack up a nice 80 dollar set.

SexyDSM95
12-23-2008, 08:39 PM
I kind of doubt that place above ^^^^^^ even has the Hayame brackets in stock.

Most places that still have them listed on there website don't actually have them in stock though. You made me second guess myself...but now I am going to have to disagree.
http://www.dsmtalk.com/forums/showthread.php?p=2056765#post2056765

Emery@stm
12-23-2008, 09:19 PM
We are working on making ours cheaper as well...

-Em

harry99GSX
12-24-2008, 11:39 PM
You made me second guess myself...but now I am going to have to disagree.
http://www.dsmtalk.com/forums/showthread.php?p=2056765#post2056765

I hereby stand corrected my friend. :)

Definitely a GREAT find on your part.

Generally the Hayame brackets are harder to find................... But not only did you score a set, You got them at an awesome price.