Forward facing oil filter housings [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: Forward facing oil filter housings


flexnuts02
03-21-2011, 04:09 PM
I need to swap out my normal housing for the FF housing to install my BWS362. I was told to be sure to feed it from the filter housing as my old turbo was and now here's the issue.
I currently run a custom oil cooler which runs both lines to the filter housing.
I also run an oil pressure gauge off the housing.
Along with the stock gauge sender and turbo feed.
This totals 5 different female connections on my current housing. The FF housing only has ONE!?
Anybody know what I can do? I'd rather not just drop all the stuff that I currently run as it is very useful, I can't believe they would make it this way!

95patalon
03-21-2011, 04:43 PM
You can get a sandwich plate that solves the oil cooler issue now ur gonna have to dicth the old oem sending unit to run your oil pressure gauge.. thats as far as I can help cause I feed my turbo from my head:D.... P.S I didnt forget to come get my parts just been busy will meet at ur work thursday :)