Exhaust Pictures

[AirZoom]

I know this Thread has been done over a thousand times, and I used the search feature. However, from the 50+ Topics I checked out, almost all of the images people posted are now dead from the image hosting places going dead. So like the Interior Thread.. I was wondering if people could post pictures of their Exhausts/Tips etc... Im in the market to get a new 2.5" Downpipe and new muffler/exhaust for my 91 TSI. I can't find any good pictures of nipped out exhausts that I like. And then the pictures of the ones on pics.dsm.org I can't ask the owners about. So post em please :P

[Rx3]

http://www.comtrix.net/~rick/gsx/greddype01a.jpg
http://www.comtrix.net/~rick/gsx/greddype02a.jpg

[LowLikeWhoa]

http://www.carversion2.com/images/home_09.jpg
http://www.carversion2.com/images/home_13.jpghttp://www.carversion2.com/images/home_14.jpghttp://www.carversion2.com/images/home_15.jpg

[ravenous_talon]

http://www.forcefedracing.com/DSCN02490.jpg ATR ss 3" turboback. Best exhaust for DSM's IMO.

[DCsGST]

true 2.5" catback w/ magnaflow muffler. muff has dual 3" exits. Sound is deep and not TOO loud. at wot sound almost dissapears and you can hear the "whoosh" of the turbo. like it, but one of the tips is turning gold. starting to blue :mad: Oh well, whole thing cost me $350.

http://www.fibermosaics.com/downloads/d/back.jpg
http://www.fibermosaics.com/downloads/d/magnaflow.jpg

[whitegst97]

http://www.miamidsm.addr.com/members/yomny_4.jpg

[CasemanTsi]

heres mine

its an straight through AeroSpeed Muffler
http://home.g2a.net/~devlish/caseman/Caseman_08.jpg

[Knower]

Stock 2G exhaust, can't see the chrome on the tips, but you can see the balding tires :rollseyes:
http://www.purgatory.net/knower/images/nikon_4500/DSCN0119.JPG

[DCsGST]

New angle of exhaust. Sorry the pic sucks.

http://www.dsmtuners.com/gallery/data/500/14001rear.jpg

[Black97TSIAWD]

http://images.cardomain.com/member_img_a/301000-301999/301954_6_full.jpg

[ALLTRBO]

My new exhaust...



http://www.imagestation.com/picture/sraid56/p2246e50c476ba9ed9c54f71317794590/fc723dd9.jpg



It's an AHP 3" turboback, with a Magnaflow "Race series" straight through muffler. I hate how it sounds under part throttle acceleration (4 bangers sound like crap).
Now I look like every other DSM with fart cannon exhaust (IMO) :( I like twin tips, i'll have them again later too (aftermarket).

EDIT: I took down 2 more pics, i'll put them back up in a little while.

[ALLTRBO]

Here they are... BTW, Imagestation sucks or something, it keeps making my beautiful clean pics pixelated whn I upload them. :( My sig pic looks much better on my comp too.

http://www.imagestation.com/picture/sraid56/p32a09e3d83706d8c9b63a71976f5d006/fc7235d7.jpg

http://www.imagestation.com/picture/sraid56/p1ee36df446e7afece5f5445414753dcf/fc7235dc.jpg

[mavisky]

new muffler and tip.

now buschur dp and test pipe, pacesetter catback w/ dynomax ultraflow and dual 3" hooker tips.

http://www.imagestation.com/picture/sraid60/p4401553a465cfd7aaeb8849ea166c555/fc4c32ba.jpg
http://www.imagestation.com/picture/sraid60/p4da6296bb165cff06bad8bced0c4cd31/fc4c32a2.jpg
the tips stick out a bit and are slightly angled towards the outside of the car (all planned)

http://www.imagestation.com/picture/sraid60/p04124985eea118a196bbc67ba0309199/fc4c3280.jpg

[talon167]

http://www.automobileforum.com/forums/uploads/post-1-1051222244.jpg
http://www.automobileforum.com/forums/uploads/post-1-1051222308.jpg

[AXiS]

Here's my new HKS Hi-Power I finally got delivered today... need to take some more pics. It sounds great though!

http://bellsouthpwp.net/a/x/axis06/images/Exhaust%202.jpg

[nellystyle]

new apexi n1 :D

http://images.cardomain.com/member_img_a/182000-182999/182867_50_full.jpg

[markGSX]

http://bedlam.dreamwater.org/eclipse/exhaust/ws7.jpg
http://bedlam.dreamwater.org/eclipse/exhaust/ws6.jpg

3" RNR turbo back with APexi muffler

[16g-95GSX]

I have the Thermal R&D catback. This is the older model, as the new model is fully polished. The older model has only a polished tip, but the muffler itself is completely black. I really like it this way, and its extremely sleek this way. It definately is a true sleeper look.
http://www.dsmtuners.com/gallery/data/500/8154Pic3.jpg

[dsm]

mine:

http://www.jalvarez.com/downloads/P8260134.jpg

[DCsGST]

Here's my new setup. 3" turboback. Loud as shyte, but flows like a champ. Sounds grumpy, but the cops havn't gotten me yet...

Heres the pics:

http://www.fibermosaics.com/downloads/d/the_scraper.jpg

http://www.fibermosaics.com/downloads/d/profile.jpg

http://www.fibermosaics.com/downloads/d/new_tube.jpg

[outbost]

Note: Oil all over the bottom from previous massive engine failure :)
http://images.cardomain.com/member_images/11/web/407000-407999/407166_12_full.jpg

[diambo4life]

..but a shot of the APEXi N1.
http://mke7isiaho.com/scerius3.jpg

[boostedinaz]

RNR 3inch O2 elim back with the N1 tip.

http://www.dsmtuners.com/gallery/data/501/10392Exhaust_Tip_Gallery-med.JPG

Michael

[talonturbo102]

outbost- must be loud huh lol

got a question for anyone to help me with. Now i know this isn't performance geared but i like dans black eclipse from pruven with the dual exhaust. I couldn't find on hsi website or on dsmtalk any info on how he mounted the second muffler and the piping. I was just wondering if anyone had any good pictures of the setup or knew how he did it. Help woudl be greatly apprec.

[DR.Spock]

http://images.cardomain.com/member_images/11/web/407000-407999/407166_42_full.jpg

all go no show, custom 3in dp, 3.5in catback cost me 324.00 to make.http://images.cardomain.com/member_images/11/web/407000-407999/407166_41_full.jpg

[outbost]

The new exhaust. Much diffrent from the on above :rolleyes: (oops, it's on page 1), and quiter. I was going to do a side exit, that is what the hole on the side is, but I changed my mind. It's a Dynomax Bullit muffler in the middle and a Ultra-Flo at the end, oh and its 3.5in. I painted it balck so it wouldn't be too obvious, and that ugly ass mild steel color just isn't cool (hint hint Dr.Spock)
http://images.cardomain.com/member_images/11/web/407000-407999/407166_111_full.jpg
http://images.cardomain.com/member_images/11/web/407000-407999/407166_112_full.jpg

[DR.Spock]

Originally posted by outbost
I was going to do a side exit, that is what the hole on the side is, but I changed my mind. It's a Dynomax Bullit muffler in the middle and a Ultra-Flo at the end, oh and its 3.5in. I painted it balck so it wouldn't be too obvious, and that ugly ass mild steel color just isn't cool (hint hint Dr.Spock)


http://www.sddsm.org/forum/images/smiles/jerk.gif

[RedTurboEclipse]

Greddy Power Extreme 3" catback on my 1995 GSX

http://www.norcalcelicas.org/forums/uploads/post-11-1080068620.jpg

[andol469]

3" RnR turbo-back with the Bullett muffler

http://home.cinci.rr.com/jmeyer32/renee/rnrinstalled1.jpg

http://home.cinci.rr.com/jmeyer32/renee/rnrinstalled3.jpg

[nefkntym]

Originally posted by DR.Spock
http://www.sddsm.org/forum/images/smiles/jerk.gif

:D

[import eater]

iv got dual 3" exahust. had 3" run form turbo backthen Y'd them of, one on each side... anyone else have that? i did it cause iv never seen it before

[nefkntym]

Originally posted by import eater
iv got dual 3" exahust. had 3" run form turbo backthen Y'd them of, one on each side... anyone else have that? i did it cause iv never seen it before

well post pics...

[import eater]

i would but the cam isnt working :(

[talonturbo102]

pics would be great. I like how the 3 inch exhaust looks and i figure if i'm going to build my own exhaust i might as well go crazy and put two mufflers.

[import eater]

yah thats what i got done, its LOUD! but looks cool as hell. i havnt seen any other ones around here like that

[talonturbo102]

well while waiting for pics does anyone have tips on doing this. One question is where do i mount the second muffler. I dont want it to just hang on the exhaust pipe.

[Falconsra]

http://home.mchsi.com/~k-nwright/tsi2.jpg
http://home.mchsi.com/~k-nwright/tsi3.jpg

2.5" Buschur Racing downpipe/exhaust

[nefkntym]

Originally posted by Falconsra
http://home.mchsi.com/~k-nwright/tsi2.jpg
http://home.mchsi.com/~k-nwright/tsi3.jpg

2.5" Buschur Racing downpipe/exhaust

damn, i had that same exhaust (buschur 2.5" down/cat/exhaust) back in california in 1999. i think it might of had a different tip back then though. i ordered everything from him, had it on the car for like three days, i was doing engine work so i never got a chance to start the car and use the exhuast. came outside on the afternoon of the fourth day to work on my car and i saw that my exhaust was gone. from the O2 to Tip. someone got under my car and unbolted the entire thing at night and left me with a o2 housing and some washers.:realmad:

[dsmfan95]

http://data.photodump.com/TeHJuSTiN/IMG00056.jpg

[Turbo'dTalon1G]

RnR 3" downpipe, dynomax race bullet muffler, expansion chamber, then dual kick up tips. Pretty sure, it will look alot better when i paint my car:http://www.resizeme.com/userimages/turbodtalon1g/563/exhaust%20009.jpg
http://www.resizeme.com/userimages/turbodtalon1g/563/exhaust%20011.jpg

[dsmfan95]

See one post above you... same muffler ;)

[c6j9r]

RS*R 3" Cat-back exhaust....with i believe a 5 inch tip. The exhaust is awesome. Doesn't sound a decibal over stock sound. Sometimes i have to check to see if the car is still running. Not exagerrating. The tip might look ricey but i love the exhaust. Just need a dp now.

http://images.cardomain.com/member_images/4/web/580000-580999/580456_9.jpg
http://images.cardomain.com/member_images/4/web/580000-580999/580456_8.jpg

[sleeper-gsx]

this is my RS*R too!!! and yes it is a 5" tip, also i have the RS*R downpipe

http://mwsns.com/forums/album_pic.php?pic_id=58

[AirZoom]

They don't make RS*R anymore do they?
When did you gusy pick those up? Thats the perfect muffler, flat no a canister style, and a nice HKS style tip. I think those are the only ones that look decent on 90-91 Talon rear bumpers....

[sleeper-gsx]

they stopped production in the late 2000-01. and i only think they only made them for the 2nd gen turbo cars, they just have started up again with nissan and other vehicles.

[c6j9r]

yeah that is the exhaust i was holding out for...i only payed $280 for it and picked it up at Turbo Trix from a guy who was trailering his car there. All in all im happy with my purchase and even happier with the exhaust as a whole. Gave it a little mothers mag polish and she shined right up

[atxdsm]

Couldn't tell you what kind it is. It was on there when i got the car.

http://img38.photobucket.com/albums/v116/AfterHrsPlayer/my%20pics/May05018.jpg

[diambo4life]

No, it's not a stock exhaust.:rolleyes:
http://mke7isiaho.com/Dsc00478.jpg

[nefkntym]

nice pic

[diambo4life]

Originally posted by nefkntym
nice pic
Thanks.:)

[2GTSIFWD]

My 3 inch Espelir Exhaust http://www.cardomain.com/memberpage/563275/5

[ftltalon]

looks good :cool:

[DSMu4ia]

http://www.doitbig.org/dsm/exhaust1.JPG

http://www.doitbig.org/dsm/exhaust2.JPG

3" 02 -> 3" DP -> 3.5" "muffler" and turndown tip.

Exits just behind front seats.

[motofixr]

My 3 inch ATR turbo-back
http://img.photobucket.com/albums/v347/talontsiawd/93TalonTsiexhaustcloseup.jpg
http://img.photobucket.com/albums/v347/talontsiawd/93TalonTsiExhaust.jpg
Sounds very mean and is very loud.

[nefkntym]

Originally posted by motofixr
My 3 inch ATR turbo-back.
Sounds very mean and is very loud.

that is what i have been hearing for the longest time. isnt that suppose to be one of the loudest exhaust systems out there for a 1g turbo dsm. wasnt buschur running the same exhaust at one point?

[Spyder1gdsm]

http://members.cox.net/jlewey1/talonator/DSC00358.jpg

3" tip on a raptor muffler 2.5" in/out. I'll be replacing this soon with an ATR catback.

[evoir]

Apexi RS 4.5" tip

http://members.cox.net/exoir/pictures/rear1.jpg

[2G4G63]

RS*R

http://www.dsmtuners.com/gallery/data/502/3447rear.JPG

[Robster]

I personally love Dr. Spock's exhuast, it may not be pretty, but who cares. It was cheap and I bet outflows all of the others on here by a lot. Nice work man, wish I knew how to weld, oh well, only one way to learn right.

This is in no way menat to say that I don't like the other exhausts, I just like to see what people make on their own.

[DR.Spock]

I personally love Dr. Spock's exhuast, it may not be pretty, but who cares. It was cheap and I bet outflows all of the others on here by a lot. Nice work man, wish I knew how to weld, oh well, only one way to learn right.

This is in no way menat to say that I don't like the other exhausts, I just like to see what people make on their own.

thanks, yea cost me only 324.00 to make the turboback exhaust. 3in dp 3.5in catback. all bends were 15 degrees or less to keep restriction to a minimum. the muffler is a dynomax SS ultra-flow which is proven to flow more than a straight pipe. its pretty loud but i like the way its sounds, nice and deep, especially with the cams. a welder welded the pipes for me. all i basically did is do the measuring and cutting, marking the pipes up to be welded. pretty easy and simple. hey no one really cares how good my exhaust looks when im doin 141 down the road :eek:

not like ive done that before ;)

[nefkntym]

actually brian, i always thought the exhaust looked better that way. It's "in keeping with the highest traditions...", cheap and effective. true DSMer.

[JUNKGSX]

heres my: RNR custom exhaust with N1 style muffler...
http://img.photobucket.com/albums/v617/junkgsx/DSC00316.jpg
http://img.photobucket.com/albums/v617/junkgsx/DSC00314.jpg

[Spoolin95DSM]

Apexi N1
http://dsmlife.com/gallery/data/500/888Picture_003.jpg

[Mitsubabe]

Here's mine (better late than never):

http://img.photobucket.com/albums/v252/Mitsubabe/CIMG2906.jpg

[HIGHWAY]

looks good

[spoold u]

http://www.doitbig.org/dsm/exhaust1.JPG

http://www.doitbig.org/dsm/exhaust2.JPG

3" 02 -> 3" DP -> 3.5" "muffler" and turndown tip.

Exits just behind front seats.

that's almost exactly like mine. 3" dp to a short straight section of 3" straight pipe, to a 3" morrosso spiralcore muffler with a turndown on it just under the back seats/in front of the gas tank. no bends, no crap. sounds good, flows excellent, i just get sick of everyone looking at the empty hole in the back of my rear fascia asking where my exhaust is! lol. i wish i was good with fiberglass, i'd fill in the whole, either that or hang like a 1" exhaust tip there, and make it look like i got some puny exhaust.

[91TSiGuy]

I built this over the winter. Still needs a flex section (have it) and a v-band assembly to seperate it roughly where the downpipe would end. I lucked out and found the 3" piping at a local salvage yard for cheap. Originally I was just going to make a full 3" downpipe to 3.5" Buschur cat-back, but they no longer sell it.
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/exhaust3inSSsemidone2.jpg
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/exhaust3inSSinstalled10.jpg

[GunnaGetOne]

My 91

http://img.photobucket.com/albums/v156/bumperlt/9aed5783.jpg

[nefkntym]

I built this over the winter. Still needs a flex section (have it) and a v-band assembly to seperate it roughly where the downpipe would end. I lucked out and found the 3" piping at a local salvage yard for cheap. Originally I was just going to make a full 3" downpipe to 3.5" Buschur cat-back, but they no longer sell it.
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/exhaust3inSSsemidone2.jpg
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/exhaust3inSSinstalled10.jpg
you do nice work

[91TSiGuy]

you do nice work
Thanks. I was still getting the hang of the Tig at the time too.
Here's an undercar shot:
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/exhaust3inSSinstalled3.jpg

[anconover]

i like the simplicity, very nice. How low is that bad boy hanging from the from ground under the rear? Gotta be a close 1.

[91TSiGuy]

i like the simplicity, very nice. How low is that bad boy hanging from the from ground under the rear? Gotta be a close 1.
Not really sure, I haven't measured it. It's slightly less than the last home made one I did a few years back. That second picture can be decieving because the front of the car was up in the air still, but you can't see that.

[Gomer_GSX]

Here's the Pina Motorsports 3" Stainless Steel Sleeper Exhaust on my 91 GSX. The system is turbo-back with no cat and I'm running an Evo3 O2. The exhaust performs great, keeps a pretty stock look and has very good ground clearence.

http://www.llarian.net/~gomer/eclipse/pinaexhaust/angle.jpg
http://www.llarian.net/~gomer/eclipse/pinaexhaust/profile.jpg
http://www.llarian.net/~gomer/eclipse/pinaexhaust/back.jpg

[dg9s1xm]

RNR 3" turboback exhaust

http://k00078.myspace.com/00078/85/29/78339258_l.jpg
http://k00078.myspace.com/00078/40/89/78339804_l.jpg

[diambo4life]

APEXi N-1 (3") rear shot.
http://img242.echo.cx/img242/3258/reartalompanel005a6pn.jpg

[diambo4life]

HKS 2.5" catback exhaust (sleeper style :) ) - now discontinued + 2.5" test
pipe.
http://img216.echo.cx/img216/2971/reartalompanel92tsi002a5qk.jpg
http://img145.echo.cx/img145/6088/reartalompanel92tsi001a1ij.jpg

[ApexImprt2nR]

Yo DCsGST who makes ur exhaust? any other pics? its sick as hell

[Gomer_GSX]

HKS 2.5" catback exhaust (sleeper style :) ) - now discontinued + 2.5" test
pipe.


Just to correct you on that its actually 2 3/8" piping, I used to have that on my car when I bought it, which also came with the original HKS catalog. When I bought the car I thought it was a stock exhaust. But it's great to see somebody still with the old school HKS stuff.

Just noticed your car is FWD, but is that still the HKS Turbo Exhaust?

[diambo4life]

Just to correct you on that its actually 2 3/8" piping, I used to have that on my car when I bought it, which also came with the original HKS catalog. When I bought the car I thought it was a stock exhaust. But it's great to see somebody still with the old school HKS stuff.

Just noticed your car is FWD, but is that still the HKS Turbo Exhaust?


Yes, I know it's 2 3/8" piping. I just hate typing fractions with out the proper script keys. Close enough. Yes, it is a FWD car and that exhaust has been on that car for years - maybe since 2000, I don't recall. The previous owner did buy it brand new from HKS. It's just a catback. The car also had a 2.5" DP (I'm assuming HKS as well) but the flex pipe rotted out so I slapped the stocker DP back on there. I'm running a 2.5" test pipe as well. It's amazing how many people argue with me (even DSMers) when I tell them it's NOT the stock exhaust. :D

[nomadtw]

Ahh, I was beat to it. The RS*R was the best exhaust you could buy though, for street performance. It did run at stock sound levels, until you opened it up (or let off the gas and with the RPMs, there is an area where it's a tad droney for a few secs).

http://www.belitski.com/erase3.jpg

http://www.belitski.com/erase4.jpg

Awesome 3" manifold-back with the ricey-est tip on the market - but you get used to it. :D

[pUtInExIm]

http://www.doitbig.org/dsm/exhaust1.JPG

http://www.doitbig.org/dsm/exhaust2.JPG

3" 02 -> 3" DP -> 3.5" "muffler" and turndown tip.

Exits just behind front seats.


I love that idea but I wana go stealth sometimes so I plan on installing 3in down pipe (no cat) then have a 3in electric cut-out then reduce it to the stock exhaust. That way you can a seeming less stock car (sound and looks) then open her wide up. Another advantage for this is that it’s a lot cheaper than a complete turbo back setup.

[Gomer_GSX]

Yes, I know it's 2 3/8" piping. I just hate typing fractions with out the proper script keys. Close enough. Yes, it is a FWD car and that exhaust has been on that car for years - maybe since 2000, I don't recall. The previous owner did buy it brand new from HKS. It's just a catback. The car also had a 2.5" DP (I'm assuming HKS as well) but the flex pipe rotted out so I slapped the stocker DP back on there. I'm running a 2.5" test pipe as well. It's amazing how many people argue with me (even DSMers) when I tell them it's NOT the stock exhaust. :D

Okay I understand why you didn't put that down. I originally had that on my car as well, and I have the recipt from 1992 for the exhaust, when it was over $700 . This was also brand new from HKS. My brother actually told me to look a little closer to see if it was the HKS when I bought the car because I just assumed it was stock, except for the fact he had bought the HKS IC piping, throttle body elbow and intake. But I'm glad to see somebody still has one on their car!

[4g63 gst]

Crap ass fwd bends .. :mad: .. sounds pimp though .. i think im the only DSM wherever i go that sounds like a Powerstroke/Duramax Diesel .. which i love ..

http://memimage.cardomain.net/member_images/6/web/582000-582999/582787_35_full.jpg

http://memimage.cardomain.net/member_images/6/web/582000-582999/582787_36_full.jpg

http://memimage.cardomain.net/member_images/6/web/582000-582999/582787_89_full.jpg


.. oh yea .. i also have this little pipe thingy that makes alot of noise when boost hits .. :D its my sleeper secret ..

[DSM 2NR]

http://www.dsmtuners.com/gallery/data/502/13705IMG_1436.JPG

apexi dunk on my 95 Talon

[JessGST]

Greatest picture ever:

http://i2.photobucket.com/albums/y32/jessgst/Talk/000_0639.jpg

Apexi N1

[Chicago_DSM]

For people with the apexi N1 catback, I know that when new it comes with a super clean polished Tip but whenever I see pictures of people who have had theirs for a while it always seems to look less shiny and more dirty and rusty...I know it is a stupid question because all exhausts end up like this but I was wondering if this is a constant problem with this exhaust or if I am exagerrating and it never happens...If it does, what kinds of things can you do to prevent it

- Hopefully I didn't just hi-jack this pic thread but I was inspired to ask after being reminded by the hot looks of the previous posters N1

[JessGST]

For people with the apexi N1 catback, I know that when new it comes with a super clean polished Tip but whenever I see pictures of people who have had theirs for a while it always seems to look less shiny and more dirty and rusty...I know it is a stupid question because all exhausts end up like this but I was wondering if this is a constant problem with this exhaust or if I am exagerrating and it never happens...If it does, what kinds of things can you do to prevent it

- Hopefully I didn't just hi-jack this pic thread but I was inspired to ask after being reminded by the hot looks of the previous posters N1

I've had my exhaust for over a year and my tip is still clean and shiny. I just use metal polish.

[diambo4life]

For people with the apexi N1 catback, I know that when new it comes with a super clean polished Tip but whenever I see pictures of people who have had theirs for a while it always seems to look less shiny and more dirty and rusty..

Mine looks pretty shiny and clean even though it's over 2 years old and seen alot of miles (over 40K.) The outer side is a little scored from debris being thrown at it by the rear tire.
http://img116.echo.cx/img116/3028/lakecreek91tsiawddiambizzofght.jpg

[afterhrsplayer]

http://img139.echo.cx/img139/7243/2415573852011161if.jpg

[DCsGST]

Yo DCsGST who makes ur exhaust? any other pics? its sick as hell

Wow, talk about old... I had that exhaust made by a local shop for $120 or some shit. I have since sold that car (FWD sux) and have a 1g now, I should take some pics of the 3" thermal :D

[95EagleAWD]

Jessica, that exhaust is savage!!!

No sleeper look for your car, eh?

[low420a]

http://www.cpatuners.com/home/files/headers_back.jpg

http://www.cpatuners.com/home/files/greddy.jpg

[JessGST]

Jessica, that exhaust is savage!!!

No sleeper look for your car, eh?

It actually doesn't look that bad in person. The N1 is a large tip though...

[eclipsegsx9797]

http://memimage.cardomain.net/member_images/8/web/620000-620999/620291_53.jpg

[eclipsegsx9797]

3" apexi n1 with down pipe and no cat... i love the sound!

[95EagleAWD]

It actually doesn't look that bad in person. The N1 is a large tip though...

I didn't say it looked bad, it's just huge!

I looked over your cardomain site... nice ride you got goin' there.

[ApexImprt2nR]

wow jessgst. that apex N1 is one big exhaust lol. nice pic. cant wait to get mine.!

[JessGST]

Thank you :)

[jivemastert]

i love my n1...

[ApexImprt2nR]

yeah how do they sound? ^^ N-1...im lookin to get one..does it have a nice deep rumble..how does it sound (diff RPM's)?

[low420a]

http://www.cpatuners.com/home/files/rear.jpg
http://www.cpatuners.com/home/files/muffler.jpg

[boostedcustomz]

http://www.doitbig.org/dsm/exhaust1.JPG

http://www.doitbig.org/dsm/exhaust2.JPG

3" 02 -> 3" DP -> 3.5" "muffler" and turndown tip.

Exits just behind front seats.


I did this same thing. N1 Downpipe with a 3" Dynomax Race Magnum Bullet muffler with a turndown on it dumping right before the rear diff. It is extremely loud in the car and sounds terrible, unless you're WOT. I have a RNR catback on order. Why? Because this thing makes so much dust it gets my car filthy. I also left the stock muffler on so it looks like I don't have exhaust. But I'll probably never get around to putting the RNR on.

[Jaxx]

Any more shots of the Apexi N-1? Any sound clips either? I wanna hear this bad boy!

[slugsgomoo]

http://bloviate.net/gvr4/images/6-5-05/thumbs/rear.jpg

stock at the downpipe, but 3" from in front of the cat back. High flow cat (emission passing even. ;)) Oh, and it looks "relatively stock".

http://bloviate.net/talon/images/5-2-05/thumbs/talon_hondaofdoom1.jpg

3" ss o2 elim, no cat, straight back into a fairly stock looking muffler (3" tip). It works well enough. ;)

[Eagle 5]

Heres some of my custom 3" stainless exhaust my friends and I built. Has a Magnaflow muffler. 3" pipe from the O2 back.
http://memimage.cardomain.net/member_images/11/web/347000-347999/347224_29_full.jpg
http://memimage.cardomain.net/member_images/11/web/347000-347999/347224_30_full.jpg
http://memimage.cardomain.net/member_images/11/web/347000-347999/347224_31_full.jpg

[nefkntym]

You guys inspired me, I just submitted my order to Road/Race for a new downpipe, APEXI N1 EXHAUST, and a set of eagle rods. I am going to build a stroker. Will post when get home.

[tdubz04]

A'pexi N1...sorry she's a lil dirty...kind of injured right now... http://us.f2.yahoofs.com/users/419e4a7aza2462ebb/ba71/__sr_/cd8a.jpg?phnKduCBGn7VkLjU

[Stanford]

http://memimage.cardomain.net/member_images/9/web/837000-837999/837754_12_full.jpg

2.5" Turboback with Magnaflow muffler.

[nomadtw]

Hey, good choice with RRE. They did have a couple goofs working (still working?) for them, but as long as Mike's around they'll always be the first place I'll deal with.

Good luck!

[95EagleAWD]

Custom made 3-inch turboback by the guys at Apex Modified here in town with a Magnaflow muffler on the rear. Straight pipe, no cat... no emissions here in Alberta to worry about!

http://i6.photobucket.com/albums/y220/95EagleAWD/pipe.jpg

Don't mind all the rust... it was inspected just fine... that's 11 Canadian winters right there... :)

http://i6.photobucket.com/albums/y220/95EagleAWD/tip.jpg

http://i6.photobucket.com/albums/y220/95EagleAWD/waterbottle.jpg

[BacknBlack92ESi]

3" Downpipe, Custom Test Pipe made by myself. Custom 3" Cat-Back made by myself. Then to a 3" Inlet MagnaFlow Race Series Muffler. And recently pollished Exhaust Piping :cool:

http://img136.exs.cx/img136/787/imag13268sm.jpg
http://img98.exs.cx/img98/4417/imag13275bb.jpg
http://img151.exs.cx/img151/4791/imag13684st.jpg
http://img60.exs.cx/img60/7789/imag17041xr.jpg
http://img60.exs.cx/img60/2079/imag17117yu.jpg
http://img60.exs.cx/img60/6126/imag17138qs.jpg

[95EagleAWD]

^^

It would appear we have the same muffler... :)

[TurboKreeper]

does an Apexi muffler actually say Apexi on it somewhere??

[awdgreenmachine]

3" Megan DP, custom 3" cat-back with an ebay special muffler
http://memimage.cardomain.net/member_images/1/web/829000-829999/829203_9_full.jpg
http://memimage.cardomain.net/member_images/1/web/829000-829999/829203_10_full.jpg

[Stoicalpear]

what is the best exhaust for spending under 400 bucks or so... is any of the ebay faky exhausts systems any good? :confused:

[talontsi222]

http://img217.imageshack.us/img217/2651/adf16xy.jpg
Apexi n1 full 3", a lil mud from rain but brand new no rust :D :cool: :o

[GunnaGetOne]

http://img.photobucket.com/albums/v156/bumperlt/Picture001.jpg

[GunnaGetOne]

More:

http://img.photobucket.com/albums/v156/bumperlt/d282a77c.jpg

http://img.photobucket.com/albums/v156/bumperlt/35871da5.jpg

[valo]

http://i6.photobucket.com/albums/y247/dsm091/PICTURE009.jpg
Slowboy's VRS 3in Turboback, sounds really sweet

[fastasleep]

Certified 3in Stainless turbo-back, installed by 16g-95GSX :D

http://img.photobucket.com/albums/v643/fastasleep/Pic223resize35.jpg

http://img.photobucket.com/albums/v643/fastasleep/Pic219resize35.jpg

http://img.photobucket.com/albums/v643/fastasleep/Pic210resize35.jpg

[sticksR4chics97]

Muffler for right now. Full exhaust coming this winter :P

http://memimage.cardomain.net/member_images/4/web/2104000-2104999/2104834_27_full.jpg
http://memimage.cardomain.net/member_images/4/web/2104000-2104999/2104834_22_full.jpg

[14bPowered]

Greddy/Trust catback
I can literally fit my entire fist inside the tip. Sounds good though :cool:
http://www.turboforum.net/forums/album_pic.php?pic_id=1885

[4cdair]

that rnr didnt look bad

[CROTSi]

Buddy Club Racing Spec III

http://i3.photobucket.com/albums/y55/CROTSi/P10100241.jpg

[talon_4g63]

nice exaust pics. i will post my 2.5 burschur racing exhaust soon..

[polojoeme1]

exhaust pic (http://viewmorepics.myspace.com/index.cfm?fuseaction=user.viewPicture&friendID=28788879&friendName=Joe&Mytoken=D816DFCA-150B-1116-02EC14EB1999AD1E13820256)

its a dirty dark pic but it is my greddy evo2 cat back

[4SFED4]

My home fabbed POS 2.5" on my daily
http://lrg.zorpia.com/0/1093/7001578.1646e6.jpg

The custom 3" on my Dad's GSX w/ a Borla XR1
http://lrg.zorpia.com/0/1093/7001576.76b1f8.jpg
http://lrg.zorpia.com/0/1093/7001577.372d65.jpg

The 3.5" on my 91 Talon
http://www.dsmtalk.com/gallery/data/500/rc16.jpg
http://www.dsmtalk.com/gallery/data/500/medium/rc30.jpg

[caddylac]

is it possible to run the exhaust under rear instead of over on a fwd like i've seen on awd? sorry 91 talon tsi

[4g63 gst]

you could but you would probably scrap it alot. as long as the car wasnt low it wouldnt be a problem. when you lower it though you will run into serious problems

[caddylac]

its got 1.5" lowering springs on it, so it would probably be damn close

[gvr4dsmer]

is it possible to run the exhaust under rear instead of over on a fwd like i've seen on awd? sorry 91 talon tsi

I have recent experience with this issue. About a month ago I put a 2.5" mandrel homade exhaust on my 90' FWD Talon. I decided to go under the rear "axel". The first attempt I had the car up with jackstands on the body, and let the suspension free hang. I then built the exhaust underneath, this did not work. I ended up with about a half inch of clearance :P , so back up it went. This time I used my jackstands and weight of the car to put full load on the suspension, then cut apart the new exhaust and tried again. This time I held it about a half inch under the
"axel" and I clears fine, I have yet to try to pick the car up with a lift :o I'm not sure how that's going to work, I'm pretty sure I can just pop off my rubber mounts and let it hang a bit. What can I say, it flows 1000 times better than stock and with my ebay muffler about $50 (already had bends).

[caddylac]

i see...so loading the suspension and gettin pretty damn close with it seemed to give you enough ground clearance?

[bluebeast]

3inch thermal R&D straight threw on a FWD....
http://img.photobucket.com/albums/v202/PakiNightmare/pic192.jpg
http://img.photobucket.com/albums/v202/PakiNightmare/pic191.jpg
http://img.photobucket.com/albums/v202/PakiNightmare/pic193.jpg
http://img.photobucket.com/albums/v202/PakiNightmare/pic226.jpg
http://img.photobucket.com/albums/v202/PakiNightmare/pic227.jpg

[lauj2gdsm]

here is my 3" pipes. and also under rear. on a 95 gst. its low. but i hardly scrape.

[Piranha451]

Here's my Thermal RD...

click on it to make the image larger.

[european]

niiiiiiiice! :D
i gotta put a full exhaust on my car soon! :D

[FoRk]

my apexi n1, yes i need rims i know!!! haha there comming soon.
http://i5.photobucket.com/albums/y173/fork808/eclipseback1.jpg

[dsmjo]

YOUR CARS FUCKN SEXY !!!! DAMM

I want the blitz back bumper but what kind is that?
I have the 2G bomex on the front of my car

[jjmoskoe]

Does the n-1 angle the muffler a little to the left?

[DR.Spock]

Does the n-1 angle the muffler a little to the left?

yes, alll of the n-1's i seen have an angle

[FoRk]

YOUR CARS FUCKN SEXY !!!! DAMM

I want the blitz back bumper but what kind is that?
I have the 2G bomex on the front of my car
haha thanks, its a slow going project thats almost where i want it to be. just trying to figure out if i wanna throw a 97-99 turbo wing on there or leave it wingless :confused:
anywho heres more pics of the n1, and yes it has a slight angle
http://i5.photobucket.com/albums/y173/fork808/eclipseasswithkitty.jpg my cat got in the way -_-

http://i5.photobucket.com/albums/y173/fork808/exhaust1.jpg

[ssdeklipse]

here is my 3" pipes. and also under rear. on a 95 gst. its low. but i hardly scrape.

How low is your car? I have eibach sportlines on my 97 gst and I'm wondering how much clearance there would be with a full 3" turboback. My car sits pretty low.

[talontsi222]

Apexi n` full turbo back 3".. and yes; angles are the shit!
http://memimage.cardomain.net/member_images/2/web/758000-758999/758432_181_full.jpg

[mywhirl2]

3" Thermal R&D

http://i32.photobucket.com/albums/d49/FourG6397GST/Picture051resize.jpg

[AWD_4g63]

RNR O2 Elminator Turbo Back 3" Stainless Steel, External Dump

http://www.dsmtalk.com/gallery/data/500/Red_MKT_Rear.JPG

http://www.dsmtalk.com/gallery/data/500/Red_Under_Car.JPG

[Dizy]

3" SS Tsudo, $266 shipped.

http://img.photobucket.com/albums/v215/Dizy56/IMG_0576.jpg

no, it didn't come covered in salt. :rolleyes: damn chicago and it's road salt.

and have a listen, only reved to ~4500
mvi_0582.avi (http://www.zippyvideos.com/6821329403936036/mvi_0582/)

[Gsxant]

go any pics of it futher back from the car.. and how was the install i was reading in another post someone had to beat there truck in a to get the clearance for the 3in piping...

[White91TalonTsi]

My new N1 :cool:
http://img96.imageshack.us/img96/7507/00007053vi.th.jpg (http://img96.imageshack.us/my.php?image=00007053vi.jpg)

[Piranha451]

Here's my Thermal RD:

http://i40.photobucket.com/albums/e210/piranha451/Eclipse/FullRear.jpg

[pillardog]

has nyone ever seen an eclipse with duals? i saw one the other day somewhere on the internet it was crazy ill try and find the link

[91_gsx]

http://www.dsmtalk.com/gallery/data/500/medium/IMGP0120.JPG
http://www.dsmtalk.com/gallery/data/500/medium/IMGP0119.JPG

apexi turbo back with new apexi Active Tail Silencer.

[Spoolin95DSM]

http://i7.photobucket.com/albums/y275/Spoolin95DSM/newgrnturd.jpg

[DR.Spock]

http://i7.photobucket.com/albums/y275/Spoolin95DSM/newgrnturd.jpg


is your exhaust coming out the front or somthing?

[fastasleep]

3" Thermal R&D

http://i32.photobucket.com/albums/d49/FourG6397GST/Picture051resize.jpg

nice pic, clean car.

[HIDDEN_SUN_GST]

http://i67.photobucket.com/albums/h290/HIDDENsunGST/9cac7ed0.jpg

http://i67.photobucket.com/albums/h290/HIDDENsunGST/7a909ec8.jpg

:P

[Spoolin69]

Here is my 3" VRS Stainless Turbo back exhaust!! Also here is a vid of the exhaust with a little fun at the end =)
VID:
http://videos.streetfire.net/search/1992+plymouth+laser/0/C7999882-F67A-48C5-9B3F-E0B3081A0D27.htm

Pics:

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_26_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_27_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_28_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_29_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_30_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_31_full.jpg

Don't mind the salt I live in WI ya know:P

[evo3gsx]

Here is my 3" VRS Stainless Turbo back exhaust!! Also here is a vid of the exhaust with a little fun at the end =)
VID:
http://videos.streetfire.net/search/1992+plymouth+laser/0/C7999882-F67A-48C5-9B3F-E0B3081A0D27.htm

Pics:

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_26_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_27_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_28_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_29_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_30_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_31_full.jpg

Don't mind the salt I live in WI ya know:P

Sounds mean! Nice launch too

[Boorail85]

only one i have right now.. ATR 3"

http://i29.photobucket.com/albums/c296/Boorail85/Talon/exhaust.jpg

[talontsi222]

apexi n1 turbo back

http://img.photobucket.com/albums/v311/skate3276/tyl0r.jpg

http://img.photobucket.com/albums/v311/skate3276/milan/98.jpg

http://img.photobucket.com/albums/v311/skate3276/HPIM1372Small.jpg

[99gsx99]

http://www.dsmtalk.com/gallery/data/500/medium/IMGP0119.JPG

apexi turbo back with new apexi Active Tail Silencer.

How do you like it?

[Steezy303]

http://myspace-261.vo.llnwd.net/00471/16/24/471994261_l.jpg

[ShadowEclipse99]

Here is My Apexi N1 Full 3in Cat-Back Exhaust On My 99 Ecplise GS
http://i60.photobucket.com/albums/h24/ShadowEclipse99/21A_00139.jpg

[Spoolin69]

Sounds mean! Nice launch too
Thanks a-lot :P That is the best part of AWD. I love the way the exhaust sounds. If I had the choice I would purchase that exhaust again.
Shane

[AZT]

Grrr, one more thing to envy you AWD DSMs for. Im still deciding on if i want to take it under my FWD rear or if I should just go over it. wanted to do 2.5in pipe at least. Any FWD routing pics to give me ideas?

[Dizy]

Grrr, one more thing to envy you AWD DSMs for. Im still deciding on if i want to take it under my FWD rear or if I should just go over it. wanted to do 2.5in pipe at least. Any FWD routing pics to give me ideas?

my tsudo goes over the rear suspension, and it's a 3". i'd go over, to avoid bottoming it out.

[4 n Toy]

Heres my 3" turbo back exhaust from Buschur Racing :D
http://www.dsmtalk.com/gallery/data/500/exhaust5.jpg

[Ken81590]

http://myspace-261.vo.llnwd.net/00471/16/24/471994261_l.jpg

yo steezdizzle what kinda exhaust is that

[Vallary99]

3" ATR turbo back:
http://www.idigroots.net/Valerie/images/vaughn/valcar2.JPG

[Steezy303]

yo steezdizzle what kinda exhaust is that
its a 3'' turbo back magnaflow exhaust

[95RedRS]

http://img.photobucket.com/albums/v227/Braindamaged0386/DSC03264.jpg

http://img.photobucket.com/albums/v227/Braindamaged0386/DSC03266.jpg

it's wet and dirty but I just drove it 600 Miles to myrtle beach in that picture.

3inch Buschur Turboback. Dynomax Muffler.

[Chicago_DSM]

Hey guys, got a question:

My car came with the 3" Buschur Racing Turbo-back....I think there might be an exhaust leak...I like how it's 1 completely straight piece of pipe for the downpipe/straight pipe area, but does your exhaust have clamps holding the pieces on? Mine looks like it's just slip fit and there might be exhaust leaking from that area...

Sounds very different...my car with the full 3" BR has a 'cammed' sound to it...The idle is very lopey at 750rpm range....The sound of 272'swithout the benefit of them

BTW, my Buschur has a magnaflow muffler on the end
http://i20.photobucket.com/albums/b229/Chicago_DSM/IMG_19352.jpg

[95RedRS]

My car has a Pacesetter 3 inch downpipe (I want a new one) into a High Flow into the Exhaust...There is a clamp on the cat off the downpipe and a band clamp off the cat onto the Exhaust...But it's horrible and is definatly leaking. I'm gonna have it welded up very soon...My cat has came off 3 times already while driving down the road.

EDIT. I took a picture for you.

http://img.photobucket.com/albums/v227/Braindamaged0386/Picture116.jpg

[95RedRS]

And yeah the bent clamp is form it falling off 3 times...I need to support it there with another hanger to...I just haven't gotten around to it.

[Ken81590]

its a 3'' turbo back magnaflow exhaust

o yea i think i already asked you that lol

[Spoolin95DSM]

is your exhaust coming out the front or somthing?
Dont ask me how or why the hell I posted that picture up, but I dont even remember posting it :confused:

Anyways Ive got a 3'' DP back exhaust with Magnaflow muffler.

http://i7.photobucket.com/albums/y275/Spoolin95DSM/nightpix3.jpg

[Blackmage]

yikes i just looked at all the fucking pages

now i'm even at more lost if i want to go with a custom turbo back with the o2 and all that

is that even legal to have the o2 dump? and don't you guys get pulled over for haveing a huge tip

i get stoped for just haveing a pointy like piece of crap tip u can get from autozone lol i put it on cuz my muffler is rusted to no other lol

im lost to what i wanna do cuz the n1 is waaaay to big if ima get pulled over for it

[scrapin_frame]

i just got my exhaust done. i did 3 inch turbo back. no cat, just a 3" magnaflow race series muffler with 4" tip. its not too loud, and has a great tone. at cruising speed the exhaust is not quiet, but not at all loud. it is just about right. under hard acceleration it does get a bit loud from 3k rpm to 5k rpm, but still very tollerable
hopefully the attachments will work.. sorry for the poor quality, i took them with my phone

[johnson_racing]

http://www.dsmtalk.com/gallery/data/500/medium/Muffler2.JPG

Non-Turbo DSM Exhaust:

-Hedman Hedder
-High Flow CAT
-2.25 Exhaust
-Apexi N1 Muffler

[thimages]

Manifold, dump tube, o2-d/p combo from Ron Shearer:

http://206.124.12.138/manifold.jpg

[dsmtalontsi]

Manifold, dump tube, o2-d/p combo from Ron Shearer:

http://206.124.12.138/manifold.jpg


OMG!!! It's so beautiful it makes me wanna cry. But very nice I like it.

[tonymitss5]

http://www.dsmtalk.com/gallery/data/500/medium/IM001028.jpg

Slowboy baby

[pillardog]

I FOUND IT!!! well actually this is a different one than the one i was lookin for but i found one ny way.
http://cgi.ebay.com/ebaymotors/Turbo-custom-paint-interior-audio-system-3-tvs-neons_W0QQitemZ4640226181QQcategoryZ6352QQrdZ1QQcmdZViewItem

[ShoGun20g]

That poor car..

[Hirevtuner]

That poor car..


No sh*t! It blinds me just looking at it!

[pillardog]

i wonder wat it sounds like though. ya kinda ugly

[1QuickChic]

damn, "i need naws, gimme this one, no make 2, of the big-uns"
shit he has enough nos in too blow himself up :rolleyes:

[Dizy]

damn, "i need naws, gimme this one, no make 2, of the big-uns"
shit he has enough nos in too blow himself up :rolleyes:

DANGER TO MANIFOLD

oops. there goes the floorpan... :P

[BroBoost]

Took a lot of effort and time to do that paintjob. Not my cup of tea but still, he did a good job.

[ParadoxMessiah]

How's this for stealth?

http://i40.photobucket.com/albums/e223/jaimeloo/rims2.jpg

3" turbo back, 2.75 flange, with cat and dynomax super turbo muffler to keep it down.

here's the build up with flowmasters (muffler is now out, too loud), next to the stockers
http://i40.photobucket.com/albums/e223/jaimeloo/stockand3inch.jpg

Edit: All home welded while the car was supported on jackstands.

[Tbtalon94]

Manifold, dump tube, o2-d/p combo from Ron Shearer:

http://206.124.12.138/manifold.jpg

Do you have any pictures of this installed on your car?

[psykhotic]

3" SS turbo back, 3" hi flow cat, Megan muffler.

http://img188.imageshack.us/img188/6159/ass4jl.jpg

[clipse_05]

Does anyone have pics of the HKS Carbon-Ti on a 2g GST or TSI FWD?

[thimages]

Do you have any pictures of this installed on your car?

http://206.124.12.138/rs3.jpg
http://206.124.12.138/rs6.jpg

[MadboostTSI]

My problem is that my side skirts are to low and molded to the car so if a shop put it's lifts under it it will own my modling and body work.

[nautical2086]

all of this searching is making me nuts lol. I've been looking for an exhaust for my car for months now, cant make up my mind, I'm looking for a basic cat back that is not too loud, just sometihng to bring out the deepness, with a tip no bigger than 3 inches, anyone help me here?????? if so please PM me with info, I'd really appreciate it another problem I have is I don't want to buy an exhaust without hearing what it sounds like too, so please if anyone Can help me out here, please do!!! thanxs guys.

[dg9s1xm]

old.....http://www.dsmtuners.com/gallery/files/4/8/6/8/6/48686back_exhaust.jpg
http://img151.imageshack.us/img151/5472/dsc002228la.jpg
http://img157.imageshack.us/img157/3904/dsc002201lg.jpg
-the RNR 3" finally back ..the SS muffler was catching a little too much police attention... so its toned down a little bit..couldn't allow myself to commit fully tho..

[Ken81590]

I FOUND IT!!! well actually this is a different one than the one i was lookin for but i found one ny way.
http://cgi.ebay.com/ebaymotors/Turbo-custom-paint-interior-audio-system-3-tvs-neons_W0QQitemZ4640226181QQcategoryZ6352QQrdZ1QQcmdZViewItem

fugly, gsx back, 3000gt side, talon front, ewwww

[Mazlee]

Hi!

anyone with 1gb Laser and N1?

[7inchexhaust]

Does anyone have pics of the HKS Carbon-Ti on a 2g GST or TSI FWD?


this is a custom exhaust with a HKS carbon ti muffler welded on. the real thing is angled out like the hipower and apexi n1

http://i53.photobucket.com/albums/g45/7inchexhaust/49eab6ed.jpg

[mikeg]

^ aren't you supposed to have a 7-inch exhaust?

[Ken81590]

HKS Hi Power catback, 3" o2 sensor housing, DNP tubular manifold
http://i31.photobucket.com/albums/c372/soufeastpenn/Talon_016.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/Talon_017.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/Talon_023.jpg

[jjmoskoe]

Very Nice Did you do it all at the same time???

[7inchexhaust]

^ aren't you supposed to have a 7-inch exhaust?

:P not on the dsm. im saving that for the pos beater honduh.

[HIDDEN_SUN_GST]

^ aren't you supposed to have a 7-inch exhaust?

he/she never said it was his/hers... :D

[mrpeanut]

Megan Racing 2.5" Catback
http://photos-335.facebook.com/ip005/v22/80/62/70600047/n70600047_30115335_191.jpg

Custom 3" turbo back
http://photos-339.facebook.com/ip005/v22/80/62/70600047/n70600047_30115339_2154.jpg

[Chicago_DSM]

Peanut, what kind of muffler did you throw on there for your custom turbo-back..Im looking to swap my magnaflow for a more N1 style

[turbolover]

http://img154.imageshack.us/slideshow/player.php?id=img154%2F8679%2F1151035638aes.smil

Hks carbon ti + t-pros downpipe.

[Boosted Again]

http://i12.photobucket.com/albums/a234/BoostedAgain/Picture3157.jpg

full 3in, with stock srt4 tip...

[mrpeanut]

Peanut, what kind of muffler did you throw on there for your custom turbo-back..Im looking to swap my magnaflow for a more N1 style

Honestly I don't know what kind it is, but I'll check it out when I'm home and will get back to you.

[mrpeanut]

I just went outside to take a look at it, and all I saw was the brand, Aspec, on it; no specific model or style numbers.

[spyke169]

http://memimage.cardomain.net/member_images/10/web/430000-430999/430695_12_full.jpg
http://memimage.cardomain.net/member_images/10/web/430000-430999/430695_13_full.jpg
old school APEX'i Dunk

[91TSiGuy]

My exhaust work in progress, but being test fitted on my boss's car:
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/100_0375_700w.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/100_0377_700w.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/100_0383_700w.jpg

Original muffler was a tad too long so I cut it in half. ;)
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/100_0344_600w.jpg

[91TSiGuy]

I ended redoing the routing of the piping to gain more ground clearance (was able to get about 3/4" more at minimum) and wanted to make sure it'd fit on a 90-91 bumper car, so I finished her up last night using a different car. The last pic is next to a 3.5" stainless exhaust which is freakin heavy.

http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/4inchexhaust010.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/4inchexhaust003.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/4inchexhaust002.jpg
http://i65.photobucket.com/albums/h209/91TSiGuy/magnaflow%20muffler/4inchexhaust016.jpg

[0lmytsi]

Looking good Brent!!!!!!!!!!!!!

[Djwired]

ya that exhaust looks pretty :) lol

[Boosted94AWD]

i have a question. I got a price quote from a local shop to do my 3 in turboback and it is $150. He said he probably wouldn't be able to do it because he'll have to go up and over the rear axles and he doesn't know if a 3 in will fit but i see that you guys have just been going under the axles and rear diff so i was wondering how good of a ground clearance do you guys have when its like this. I told him i wanted to do it this way and he said he would but it would probably get all beat up from the road and everything.just wanted to know wat you guys think.

[Chicago_DSM]

How come you test the exhaust on every car except your own?

[1QuickChic]

i have a question. I got a price quote from a local shop to do my 3 in turboback and it is $150. He said he probably wouldn't be able to do it because he'll have to go up and over the rear axles and he doesn't know if a 3 in will fit but i see that you guys have just been going under the axles and rear diff so i was wondering how good of a ground clearance do you guys have when its like this. I told him i wanted to do it this way and he said he would but it would probably get all beat up from the road and everything.just wanted to know wat you guys think.

Find another exhaust shop, from the factory the exhaust goes under the rear differential on awd's. Only time it goes over the axle is on a fwd with a trailing axle. ;)

[Boosted94AWD]

yeah i'll look around more and see what i'll find

[dp_chingy]

hey, im fairly new to the tunner seen and i was wondering if a gst catback would fit on my 98 gs?

[1QuickChic]

it should ;)

[dp_chingy]

hey thanks man.

[0lmytsi]

How come you test the exhaust on every car except your own?

His car isn't running and is sitting at home.

[91TSiGuy]

His car isn't running and is sitting at home.
Hit the nail on the head. ;)

Yeah, my car won't be finished until next year most likely. I have a ton I'm doing to it, and half of that ton costs a ton. Gotta save up, you know? :(

[DSMonster]

this is pretty old, i have had this exhaust since march.
DNP tubular Mani > FP 18g > Vpe O2 housing w/tial 38mm > Megan SS DP > Thermal SS catback

http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/shine.jpg
http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/newexhaust3.jpg
http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/newexhaust.jpg
http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/newexhaust2.jpg
http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/car2.jpg
DNP mani jet coated and the exturnal waste gate.
http://i18.photobucket.com/albums/b114/Jake2988/Talon%20Exhaust/mot1.jpg

[DistinctiveGS]

Anyone have pics of the new MEGAN RACING 2G AWD Exhaust?

[5arge]

anyone have pics of a Greddy Evo2 on a 2G?

[starke19]

I guess I'll show everyone the Pina Motorsport / Andre workmanship.

3" 02 housing flanged for Tial 38mm

3" Downpipe

4" Downpipe back

Everything is V-Band clamped except for the muffler to the piping and the 02 flange to the turbo.

Burns muffler in the first pictures. Replaced it with a Magnaflow muffler in the latter pictures. The whole exhaust has two bends that are no more than 15 degrees each.

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_002.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_003.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_005.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_013.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_019.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_022.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_032.sized.jpg

http://web.pinamotorsports.com/albums/album94/tn_taylor4inex_028.sized.jpg

http://img142.imageshack.us/img142/5900/resizedvv8.jpg

http://img155.imageshack.us/img155/5732/resized2rc7.jpg

[JoshinPA]

Thermal R & D with N1 DP

http://img.photobucket.com/albums/v326/StevenCole/Josh%20GSX/94b2d0d0.jpg

[aquito]

http://img122.imageshack.us/img122/820/p1010019lk5.jpg
http://img238.imageshack.us/img238/5033/p1010020qv3.jpg

[eltoni17]

WEll heres my Full 3in with a nice tip at the end,no muffler.:cool: \


http://i73.photobucket.com/albums/i208/eltoni17/Picture107-1.jpg

[boosteddevil]

^ you got any more pics, maybe a video of that exhaust? what are the specs and what brand is that exhaust?

[goshawty]

Thats when you know you can justify a 4" ricer tip !!!!! Nice job.

[eltoni17]

thats an expensive ricer tip, no brand exhuast, just something i threw together , feels a lot smother at wot and a lot quiter than when i had a muffler on there, well except on idel, i dont have a video yet, cause im still workin on the car, but when i im done hopefully next week it will be up and runnin again , then i will record it.

[WanganRunnerTSI]

3in Apex-i N1 turboback

http://i38.photobucket.com/albums/e138/Ciscero/P6200024.jpg
http://i38.photobucket.com/albums/e138/Ciscero/P4010020.jpg

[icefox]

2.5 long DP (idk brand) with 2.5" piping and a magnaflow performance muffler.. I wish it didnt stick out so much, might cut it. but I really love how it sounds.. its almost completely quiet driving, under WOT it sounds like a jet :D
http://upshizzle.com/gallery/albums/11.06/IMG_1637 (Small).jpg




View My Video (http://video.tinypic.com/player.php?v=46z5k5g)
and a small clip, rev to about 3500, stutter box is at 3600 RPM with long (250) intervals. You should hear my 5500 RPM stutterbox with 100 rpm intervals

[fourced]

Custom 3" turbo-back with a Magnaflow muffler:

http://img.photobucket.com/albums/v65/fourced/DSM6.jpg

[Steezy303]

Exhaust we did for a customers GVR4
http://i21.photobucket.com/albums/b269/Steezy303/DSC01112.jpg
http://i21.photobucket.com/albums/b269/Steezy303/DSC01113.jpg
http://i21.photobucket.com/albums/b269/Steezy303/DSC01114.jpg
http://i21.photobucket.com/albums/b269/Steezy303/DSC01115.jpg
http://i21.photobucket.com/albums/b269/Steezy303/DSCN0070.jpg

[gvr4dsmer]

please delete me..

[gvr4dsmer]

[QUOTE=Steezy303]Exhaust we did for a customers GVR4
[QUOTE]

Nice workmanship, I'm done with flanges and gasket's, nut's and bolts in imossible places. V-bands are the way to go and plane to use them over flanges anyplace I can.

Also, the wheels are pretty nice but the offset seem's like a bit much. It kinda look's like an r/c stadium truck :P no offence of course. I love all galant's, and once again good job on the exhaust!

-Sam

Shit, sorry about the double post. If it's an issue please delete the above post. Thanks.

[Chicago_DSM]

Custom 3" turbo-back with a Magnaflow muffler:

http://img.photobucket.com/albums/v65/fourced/DSM6.jpg

Holy shit guys, I think I found my Twin:
http://i20.photobucket.com/albums/b229/Chicago_DSM/IMG_19352.jpg
http://i20.photobucket.com/albums/b229/Chicago_DSM/IMG_2604_custom.jpg

[Steezy303]

Exhaust we did for a customers GVR4


Nice workmanship, I'm done with flanges and gasket's, nut's and bolts in imossible places. V-bands are the way to go and plane to use them over flanges anyplace I can.

Also, the wheels are pretty nice but the offset seem's like a bit much. It kinda look's like an r/c stadium truck :P no offence of course. I love all galant's, and once again good job on the exhaust!

-Sam

Shit, sorry about the double post. If it's an issue please delete the above post. Thanks.
Thanks!
Yes, the V-Bands are a wonderful thing, We are going to be redoing my exhaust here in a few weeks and I plan on using V-Bands..

Yea, the wheels are a bit much, the customer is a very good friend of mine, I guess my mexicaness is rubbing off on him :D

[BroBoost]

Here is mine, i didnt like the one big tip so i opted for dual tips. <a href="http://www.MyOnlineImages.com/serveFile.aspx?fi=881202">http://www.MyOnlineImages.com/serveFile.aspx?fi=881202</a>

this is the muffler off the car http://www.myonlineimages.com/Members/Boost/Images/muff.JPG

[Woz]

runnin a little:rolleyes: rich
http://i80.photobucket.com/albums/j200/Woznin49/smoke.jpg

[BroBoost]

whoops ill try this again http://www.myonlineimages.com/Members/Boost/Images/car%20exhaust0.JPG

and off the car http://www.myonlineimages.com/Members/Boost/Images/muff2.JPG

[the_skin_eater]

http://memimage.cardomain.net/member_images/6/web/2526000-2526999/2526515_12_full.jpg

Heres the only one of mine I got...

3 in back, no cat, no muffler. I think it used to have one...but was cut off right behind the wheel. You can see the end from the side.

Its pretty loud from the 4 miles I drove it.

[1slow93turbo]

Here is my new complete 3" stainless T304 v-band exhaust. All parts are vibrant performance pieces which are very nice and affordable. Also the v-bands inter-lock with another to make sure there are no leaks. Pics do no justice for the welds and the added tab on the downpipe flange is there for extra strength, since I wrapped it cosmetics were no problem.

Hope you enjoy,

Jason

http://img129.imageshack.us/img129/7392/exh1cc9.jpg
http://img294.imageshack.us/img294/9977/exh2ok5.jpg
http://img247.imageshack.us/img247/7866/exh3ig0.jpg
http://img129.imageshack.us/img129/2507/exh4vp4.jpg
http://img294.imageshack.us/img294/2802/exh5jz8.jpg
http://img129.imageshack.us/img129/8532/exh6eh8.jpg
http://img129.imageshack.us/img129/9766/exh7gc5.jpg
http://img294.imageshack.us/img294/2389/exh8px4.jpg

[Liquid-tsi]

http://i12.photobucket.com/albums/a219/liquidnote/Picture013.jpg

[5arge]

this thread needs more Greddy Evo2

[psykhotic]

Of course none of the straight on ones came out, bad shadows :( this is from last may when my exhaust was going on.

http://img243.imageshack.us/img243/4694/exhaustbr8.jpg
http://img178.imageshack.us/img178/3023/exhaust2rr4.jpg