Turbo Timer fails with AFR connected

[Dawvi]

hey all. I just put in my AFR and now when I turn off my car and the turbo timer starts to count down, my idle is almost non existent. The car pretty much wants to die out. I have gotten a CEL and the pocketlogger reported it being a P0100 error code with no description. Any help will be appreciated.

Thanks

Dawvi

[Tanqueray201]

Did you ever figure it out? I'm getting the exact same thing. All I did was install a few gauges. I tried starting the car afterwards, but forgot to plug my safc back in and it of course, ran like crap. After I fixed it, my car now ran exactly how you're describing.

It would idle EXTREMELY low, to the point where I'd have to rev the engine to keep it from dying. CEL is p0100. Eventually, the car now idles normally, but the CEL is still there.

[lan]

po100 is volume airflow circuit malfunction check the harness.

[btrux06]

if th eharness is plugged in check your afc wires, if there good your mas is bad