just wanted to update everyone from the old thread

[indy1979]

ok, finally got the engine installed today. not running yet as I still have to rewire my ignition/cruise/set button. gonna be a trick to start this car. anywho, here are the latest pics.

http://photos.yahoo.com/samwynens

lemme know what you guys think.

Sam

[TaLoNBLiNGBLiNG]

Looks good! :) Did you have to upgrade the tranny as well? I'm currently looking for a turbo 4g63 motor to swap in my 1.8L. Any advice or little things I need to get?

[indy1979]

I got a JDM turbo tranny cause the 1.8 tranny will give you problems with the starter. You'll need the harness for YOUR car. um, too tired to think at the moment. lemme know if you have any questions.

Sam

[TaLoNBLiNGBLiNG]

So you're saying to use the 1.8L wiring harness for the 4g63 turbo motor? :confused:

I've got someone that can hook me up with the motor, wiring harness, and tranny for a little over $700 :D

[indy1979]

no, use the 2.0 harness for your talon. I don't know if the harnesses from the eclipse or the laser will fit.

Sam

[TaLoNBLiNGBLiNG]

Well the guy can get me the motor with the wiring harness for THAT motor, but not sure if it was taken out of a talon, eclipse, or laser. They should all work seeing how the engine bays are completely identical. Just the body work and small interior accessories differ.

[Blackboost]

Originally posted by indy1979
no, use the 2.0 harness for your talon. I don't know if the harnesses from the eclipse or the laser will fit.

Sam

1.8NT, 2.0NT and 2.0T engine harnesses(sp??) is the same for every model 91-94 (engine dependant of course)

The same applies to the 90 cars. But the harnesses(sp?) are different than the ones in the 91-94 models.

[TaLoNBLiNGBLiNG]

Originally posted by Blackboost


1.8NT, 2.0NT and 2.0T engine harnesses(sp??) is the same for every model 91-94 (engine dependant of course)

The same applies to the 90 cars. But the harnesses(sp?) are different than the ones in the 91-94 models.
Cool, thanks :D