Turbo Pics! [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com

: Turbo Pics!


Pages : [1] 2 3

sp00ln
11-09-2002, 12:21 PM
http://www.allaboutspeed.net/turbo.jpg

Thats better :D

BarelyLegalGSX
11-13-2002, 05:11 PM
http://members.aol.com/myairmax69/big16g.jpg

my big 16g

ericm555
11-19-2002, 09:07 AM
My 17c out of a syclone. :)
http://www.ericm555.d2g.com/turbo3/smallturbo.jpg
My freinds big 16G
http://www.ericm555.d2g.com/talon/b16gsmallpic.jpg

Entropy
11-22-2002, 10:47 AM
ok gonna try one more time...if it doesnt work sorry! Dont know why this one folder of turbo pics wont post!

http://www.teamshs.com/ethan/Car%20Pics/turbo/7.JPG

http://www.teamshs.com/ethan/Car%20Pics/turbo/9.JPG

http://www.teamshs.com/ethan/Car%20Pics/turbo/10.JPG

cross my fingers hope it works

DlandryTSI
11-29-2002, 08:45 AM
Heres my FP Red

http://dlandry.shadownetcentral.org/images/red/install_pic_1.jpg
http://dlandry.shadownetcentral.org/images/red/install_pic_3.jpg

anconover
02-20-2003, 11:22 PM
dre's fp-30, altough he took it off to put back on the green

http://www.twingles.com/ideck/engine/fp30_installed_top.jpg

FP-30 compared to a Green

http://www.twingles.com/ideck/engine/fp30_greenvs2.jpg

knockedoutawd
03-11-2003, 07:03 PM
http://members.rogers.com/darko/turbo2.jpg

http://members.rogers.com/darko/turbo1.jpg

It came with a swiss watch! :eek:


:santa:

Intrusive97GSX
03-12-2003, 01:03 PM
FP3065

http://home.bellsouth.net/coDataImages/p/Groups/79/79984/folders/55820/403006damn.jpg

ginsu417
03-25-2003, 02:57 AM
http://mysite.verizon.net/res1fotg/turbo.JPG

Chiquita likes teeny turbos. They taste yummy.

JET
03-26-2003, 10:35 PM
A couple of pics of my PTE 50 trim (aka BR500). It is bigger than it looks in the pic, TO4E compressor side with a 3" inlet.

http://eclipse.knight-rider.org/mn-dsm/members/images/JET/IMG_0543.JPG

http://eclipse.knight-rider.org/mn-dsm/members/images/JET/IMG_0544.JPG

machinis
04-06-2003, 03:44 PM
My latest :D
http://images.cardomain.com/member_img_a/331000-331999/331187_11_full.jpg
http://images.cardomain.com/member_img_a/331000-331999/331187_12_full.jpg

GSXtreme
04-07-2003, 10:55 AM
FP GREEN

http://www.mckeone.net/photos/parts/P4050001.JPG

Installed, still have the FMIC and alot more too do!

http://www.mckeone.net/photos/parts/P4050006.JPG

AXiS
04-07-2003, 08:20 PM
Here are some half pics of my "new" 14B that I'm in the process of installing.. shown here is the porting I did today to match the RRE J pipe.

http://bellsouthpwp.net/a/x/axis06/images/porting%202.jpg

If you want more go here http://bellsouthpwp.net/a/x/axis06/14b.htm because the pictures are very large!

knockedoutawd
05-03-2003, 07:26 PM
I just took this one the other week when I was pulling the 16g out... I think its hiding under there somewhere ;)

http://members.rogers.com/darko/16gt4.jpg

AWDTurbo
05-30-2003, 10:33 AM
SBR GT12 /w 4" inlet :D

http://awdturbo.myserver.org:8080/AWDTurbo's%20Talon_files/MyPicPage/New%20pics/turbo/DSCF0144.jpg

http://awdturbo.myserver.org:8080/AWDTurbo's%20Talon_files/MyPicPage/New%20pics/turbo/DSCF0143.jpg

Ronin17
05-30-2003, 05:53 PM
SBR-GT10

http://friday4.home.mchsi.com/turbo1.jpg

http://friday4.home.mchsi.com/turbo3.jpg

http://friday4.home.mchsi.com/turbo4.jpg

GT12 looks freakin huge compared to mine, lol. Can't wait to get this turbo on...

wht GSX
06-20-2003, 09:01 AM
PTE 50 Trim :D

http://www.dsmtuners.com/gallery/data/500/3339GSX_project_150.jpg

http://www.dsmtuners.com/gallery/data/500/3339GSX_project_136.jpg

machinis
06-26-2003, 05:17 PM
http://images.cardomain.com/member_img_a/331000-331999/331187_19_full.jpg
My *new* Garrett broken to pieces.:(

stickers
07-04-2003, 06:33 PM
ETE32 50trim TO4e
http://www.mach1motorsports.ca/images/Phil/dsm/images/dsm11.jpg

GsxNy
07-25-2003, 11:30 AM
AGP RS49

http://home.earthlink.net/~gsxny/turbo/images/DSC00730.jpg

http://home.earthlink.net/~gsxny/turbo/images/DSC00731.jpg

91TSiGuy
07-26-2003, 10:11 PM
PTE 56 trim GT compressor turbo. I'm thinking I can max this bad boy out one day ;)
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/pte56turbo10x600.jpg
http://www.personal.psu.edu/users/b/t/btb139/images/mycar/pte56turbo6x600.jpg

me612
08-25-2003, 12:59 AM
ok sorry that other pic didn't work here's 2 other pics, once again its RnR's t3/t4 50 trim kit
http://www.dsmtuners.com/gallery/data/503/3146manifold2.jpg
http://www.dsmtuners.com/gallery/data/503/3146new_engine.jpg

edpettit_TSI
09-22-2003, 03:03 PM
Here is my SBR-M50 :)

http://www.personal.psu.edu/users/e/j/ejp157/enginebay2.jpg http://www.personal.psu.edu/users/e/j/ejp157/turbo.jpg

91TSiGuy
09-29-2003, 03:11 PM
Originally posted by 95stktrbo:(
AGP 50-trim kit.

http://images.cardomain.com/member_images/12/web/396000-396999/396321_12_full.jpg

Just fixing the link for ya.

Ka24eT
10-09-2003, 02:12 PM
SC-54
http://images.cardomain.com/member_images/1/web/433000-433999/433916_8_full.jpg

TsiBred
10-13-2003, 03:20 PM
here's a few of mine It's either a 16g or Scm60 I forget....
http://images.cardomain.com/member_images/1/web/433000-433999/433873_15_full.jpg

http://images.cardomain.com/member_images/1/web/433000-433999/433873_17_full.jpg

11sec4cyl
10-26-2003, 11:07 AM
20g. t3 intake side housing. ported to hell and clipped 15 degrees. if i dont hit 11's on this, something is wrong.

http://www.wideopenwest.com/~bobcats/20g2.jpg

http://www.wideopenwest.com/~bobcats/20g1.jpg

^^i took the penny out jackass. ;)

talon167
11-03-2003, 08:10 AM
http://www.automobileforum.com/forums/uploads/post-1-1067832600.jpg

diambo4life
11-05-2003, 02:23 PM
http://mke7isiaho.com/resizedShowLetter2.jpg
http://mke7isiaho.com/reDSC00798resized.jpg
http://mke7isiaho.com/resizedShowLetter4.jpg

Zelite5
11-25-2003, 02:08 AM
Well I'm bored, so here's my youngster:

http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjA4NzU5NnM0MTNkZmQzMXk1NDE%3D.jpg

4g63girl
12-17-2003, 09:13 PM
http://pic1.picturetrail.com/VOL114/955148/1764629/20862207.jpg
http://pic1.picturetrail.com/VOL114/955148/1764629/21057372.jpg
my man's old ete52

and my sbr 20g
http://pic1.picturetrail.com/VOL114/955148/1764629/23238836.jpg
http://pic1.picturetrail.com/VOL114/955148/1764629/23238860.jpg

11secdsm
12-25-2003, 08:23 PM
http://www.mckeone.net/phillydsm/images/ginev3.jpg

...my PTE 60-1. Yeah I know it's messy in there...gimmee a break...it's snowing out! One of these weekends I gotta take 'er out and polish her up.

treimche
02-09-2004, 10:58 PM
My shiny FP 3065.

http://www.saturn9.ws/~troy/partspics/30653.JPG

http://www.saturn9.ws/~troy/partspics/30652.JPG

http://www.saturn9.ws/~troy/partspics/30651.JPG

RedTurboEclipse
02-10-2004, 02:16 PM
damn this thread gets me jealous.. all these bigger than 16g turbos.. with nice and shiny polished compressor housings.. damn it.. to top it off some with nice manifolds.. SOON!!! nice pics guys

Turbo'dTalon1G
02-11-2004, 10:37 PM
It's in there, somewherehttp://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjcxMjQ1NnM0MTNkZmQzMXk1NDE%3D.jpg

Turbo'dTalon1G
02-11-2004, 10:37 PM
It's in there, somewherehttp://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjcxMjQ1NnM0MTNkZmQzMXk1NDE%3D.jpg

boostedtsiawd
02-25-2004, 07:05 AM
This new one should be good for 11.0-10.8's when I do a few more things.
http://www.jnztuning.com/images/Shanecar2.JPG

outbost
03-05-2004, 12:41 AM
I just got this in today. It is the GT35 Blowzilla from Cheapturbo.com This thing is big! It has the 2.41/3.22in GT40 compressor wheel.
http://images.cardomain.com/member_images/11/web/407000-407999/407166_100_full.jpg
Here is the Comp wheel to give you a good gauge of the size of this thing.
http://images.cardomain.com/member_images/11/web/407000-407999/407166_99_full.jpg
I should have it on by tomorrow night.

emulter
03-07-2004, 10:49 PM
my b16g :D
http://www.resizeme.com/userimages/ewmulter/531/myturbo.jpg http://www.resizeme.com/userimages/ewmulter/531/myturbo2.jpg

HybridAWD
03-09-2004, 09:09 AM
http://gallery.turbotime.us/albums/album10/aaa.jpg
http://gallery.turbotime.us/albums/album10/aab.jpg
http://gallery.turbotime.us/albums/album10/aac.jpg
http://gallery.turbotime.us/albums/album10/aad.jpg
http://gallery.turbotime.us/albums/album10/aae.jpg

Lancer14
03-29-2004, 05:16 PM
http://lancer14.homestead.com/files/FP3.jpg
http://lancer14.homestead.com/files/FP1.jpg
http://lancer14.homestead.com/files/FP2.jpg
http://lancer14.homestead.com/files/FP4.jpg

Chris

flicker
04-07-2004, 04:45 PM
meh...camera phone...

http://img25.photobucket.com/albums/v74/flicker/13313501317_0.jpg
http://img25.photobucket.com/albums/v74/flicker/13313050501_468.jpg
http://img25.photobucket.com/albums/v74/flicker/13311721733_0.jpg
http://img25.photobucket.com/albums/v74/flicker/13311413253_0.jpg

91turboTSi
04-12-2004, 12:16 PM
http://images.cardomain.com/member_images/8/web/212000-212999/212528_6_full.jpg http://images.cardomain.com/member_images/8/web/212000-212999/212528_7_full.jpg
FP 3065

Boostin'X'
04-12-2004, 04:09 PM
Looks like everyones buying those FP or 50/60trim bolt ons now adays.

BarelyLegalGSX
05-11-2004, 06:41 PM
Buschur Racing 475

http://www.dsmtuners.com/gallery/data/503/22793turbo1.jpg

http://www.dsmtuners.com/gallery/data/503/22793DSCF0038.jpg

http://www.dsmtuners.com/gallery/data/503/22793DSCF0043.jpg

anothernt
05-11-2004, 09:59 PM
hmm why not.........pte scm50 next to my old 14b.......and don't ask about the red wastegate actuator :P

http://sean3d333.tripod.com/compare.jpg

I'm gonna polish the compressor housing if I ever feel like it.

LamarTSi
06-09-2004, 12:56 PM
FP3065, 2.5" O2 Housing w/ Dump Tube. Sorry for pictures quality. :)

http://pages.videotron.com/94tsi/images/fp3065/biere.jpg
http://pages.videotron.com/94tsi/images/fp3065/compinlet.jpg
http://pages.videotron.com/94tsi/images/fp3065/compoutlet.jpg
http://pages.videotron.com/94tsi/images/fp3065/exhinlet.jpg
http://pages.videotron.com/94tsi/images/fp3065/turboexh.jpg
http://pages.videotron.com/94tsi/images/fp3065/kit.jpg

PRSRIZD
06-09-2004, 10:02 PM
AGP RS60

http://www.cody624.addr.com/My%20Pictures/kevinhead.JPG

http://www.cody624.addr.com/My%20Pictures/kevinhead2.JPG

SlowWhite
06-11-2004, 11:48 AM
All these turbo picts got me itching to get mine. It supposed to have shipped today from PTE.

PTE T04S 3561 .63A/R - 4 bolt T3 housing.

2 weeks until the cars done. Can't wait. Dyno times schedualed for June 25th.

gimmie11s
06-27-2004, 03:14 PM
my buddy's PTE50 trim...http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDUxMzkxNnM0MTNkZmQzMXk1NDE%3D.jpg

-d

gimmie11s
06-27-2004, 03:15 PM
my current setup... FP green.. this is an old pic

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDUxMzg3NnM0MTNkZmQzMXk1NDE%3D.jpg

cbilmer
06-27-2004, 03:48 PM
Nice turbos guys! Those look beautiful alone, and under the hood!

DSMu4ia
07-06-2004, 07:30 PM
http://www.doitbig.org/dsm/motor1.JPG

to4e, 60-1, stg 3, .63.

3" 02, 3.5" exhaust.

Kinda clean setup.

PRSRIZD
07-08-2004, 10:24 PM
new pics of the RS60 with the ceramic coating.

http://www.cody624.addr.com/My%20Pictures/Workbench.JPG

TurboTsi1992
07-11-2004, 11:37 AM
:cool: :rockon:
http://img78.photobucket.com/albums/v281/Turbotsi1992/102_0219.jpg

diambo4life
07-11-2004, 04:04 PM
Originally posted by TurboTsi1992
:cool: :rockon:
http://img78.photobucket.com/albums/v281/Turbotsi1992/102_0219.jpg

WTF is that?:eeek: :eeek: :eeek:

MindBlowin03
07-11-2004, 05:31 PM
Originally posted by diambo4life
WTF is that?:eeek: :eeek: :eeek:
I believe thats a T-25.:D Heres a pic of my 16g:(
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDcwNTY1NnM0MTNkZmQzMXk1NDE%3D.jpg

diambo4life
07-12-2004, 11:07 AM
Sorry the picture is rotated 90*. :dunno:
TO4E SBR-GT12: It's not as big as it looks. :rolleyes:

http://mke7isiaho.com/seventyrererereDSC007.jpg

TurboTsi1992
07-12-2004, 04:39 PM
Originally posted by diambo4life
WTF is that?:eeek: :eeek: :eeek:

i was at Englishtown NJ and saw it sitting on a table with a bunch of other turbos, i talked with the guy selling them and bs'd little bit, he said it could support up to 1400-1500hp :eeek: i dont think our little engines could spool that monster. :) heres some more pictures of them.
http://img78.photobucket.com/albums/v281/Turbotsi1992/102_0217.jpg
http://img78.photobucket.com/albums/v281/Turbotsi1992/102_0218.jpg

K_Mans_TSI
07-14-2004, 01:43 PM
camera phone:

http://racepa.com/forums/uploads/post-15-1089829840.jpg

http://racepa.com/forums/uploads/post-15-1089830023.jpg

PTE 50 trim stage 3 exhaust wheel with a rotated compressor cover (damn that 1g water outlet)

SlowWhite
07-16-2004, 07:52 AM
turbo's in and cars running.

PTE GT3561 "S" Cover, 5 bolt T3 housing .63a/r

http://www.xratedcc.com/gallery/bartonmemberpics/Engine_Bay_New_Turbo_Set_up_Table_2?full=1

http://www.xratedcc.com/gallery/bartonmemberpics/Engine_Bay_New_turbo_Set_up_Table_1?full=1

http://www.xratedcc.com/gallery/bartonmemberpics/Engine_Bay_New_Turbo_Set_up?full=1

http://www.xratedcc.com/gallery/bartonmemberpics/Engine_Bay_New_Turbo_installed?full=1

If those don't work just go here:
http://www.xratedcc.com/gallery/bartonmemberpics?page=1

TurboSpoolinIns
07-17-2004, 04:00 PM
New turbo. :D


http://img7.photobucket.com/albums/v17/guessd/incar5.jpg

gimmie11s
07-18-2004, 11:05 AM
what is it?

diambo4life
07-19-2004, 03:55 PM
Originally posted by TurboSpoolinIns
New turbo. :D


http://img7.photobucket.com/albums/v17/guessd/incar5.jpg

Where are you gonna install your radiator? :dunno: That thing is HUGE!! :eek: 14B to that? I think you are gonna notice "some" lag...even if it's a BB turbo.:P

TurboSpoolinIns
07-27-2004, 09:12 AM
The radiator fits nice and snug :) Lag is overrated :cool: :D I know it's going to be quite different spooling at 3k rpm (on the 14b) to spooling at 5500 rpm (new turbo) :) :santa:

Knower
09-22-2004, 06:04 PM
Eh, I'm a few weeks away from getting all the fabrication done (not by me) and getting all the other stuff I'm putting on the car to match the turbo running and happy together.

FP3052 w/ 44mm Tial and custom 3" SS o2 housing with re-routed SS wastegate dump tube to match:

http://www.gamespyarcade.com/knower/images/new_turbo/fp3052_o2_tial1.jpg

http://www.gamespyarcade.com/knower/images/new_turbo/fp3052_o2_tial2.jpg

http://www.gamespyarcade.com/knower/images/new_turbo/fp3052_o2_tial3.jpg

http://www.gamespyarcade.com/knower/images/new_turbo/fp3052_o2_tial4.jpg

gimmie11s
09-22-2004, 06:10 PM
orlando, ty wants his money.....


:eek:

Knower
09-22-2004, 06:23 PM
Originally posted by gimmie11s
orlando, ty wants his money.....


:eek:

Yeah, I want my turbo!

:D

Robster
09-23-2004, 05:23 PM
WOW:eek: I am extremely jealous at this point, I think I either want a t3/t4 hybrid or a gt30r, we'll see.

Knower
09-27-2004, 09:49 PM
And, just for fun, my dead t-25:
http://www.gamespyarcade.com/knower/images/t25_blowedup/t25_unhappy1.jpg

http://www.gamespyarcade.com/knower/images/t25_blowedup/t25_unhappy2.jpg

Oil seals blew and then it REALLY went to turbo hell.

gsxboostin
09-27-2004, 10:53 PM
yeah im pretty sure that would be pretty shitty...bet that sounded nice.....haha

garychios
03-17-2005, 06:50 AM
http://teamzrp.com/zrpgallery/albums/GaryA/DCP_0783.jpg

Here is my tiny turbo
http://teamzrp.com/zrpgallery/GaryA/DCP_0783

Kevin90GSX
03-17-2005, 07:40 AM
Looks slow Gary. ;)

Cant wait to see it perform this season man. Good luck on getting in the 8's. :)

16g-95GSX
03-17-2005, 03:06 PM
*Sorry Edit*

Reddogg07
03-18-2005, 07:55 AM
PTE 50 trim :eek:
http://i32.photobucket.com/albums/d14/Reddogg07/DSCF0124.jpg

my_gsT95
03-18-2005, 08:58 AM
http://www.sacramento-dsm.com/gallery/albums/userpics/10002/normal_turbo3.jpg

T3/TO4B with Logic Performance Tubular mani.

TalonRcR
03-18-2005, 09:31 AM
http://www.sacramento-dsm.com/gallery/albums/userpics/10002/normal_turbo3.jpg

T3/TO4B with Logic Performance Tubular mani.

Lookin good man :D

Chris

0lmytsi
03-19-2005, 11:39 AM
turbonetics 50 trim

http://members.aol.com/olmytdadon/turbo.gif

razorawd
03-22-2005, 01:45 PM
http://members.aol.com/myairmax69/big16g.jpg

my big 16g

man that car looks real nice those wheels set it off.

BarelyLegalGSX
03-29-2005, 03:55 AM
man that car looks real nice those wheels set it off.


wow thats a old pic

http://www.dsmtuners.com/gallery/data/503/22793DSCF0046-med.JPG

thanks man

more pix here
http://www.dsmtalk.com/forums/showthread.php?t=126956

Limegrntaln
03-29-2005, 04:11 AM
Barely Legal,

Nice setup, what are you changing too? maybe you posted already somewhere and I missed it? What part of what you have arent you happy with. I like to hear feedback on mods, likes dislikes and that sorth of thing, maybe you can just link me to the thread if you already posted about whats changing

BarelyLegalGSX
03-29-2005, 04:21 AM
PM sent......

Limegrntaln
03-29-2005, 04:51 AM
I guess that kinda was off Topic sorry im 14 hours ahead of the east coast. I tend to get senile sometimes. Apologies.

30 and im already over the hill.

TuRtLePoWeRdGSX
03-29-2005, 08:46 AM
BarelyLegalGSX Can i ask you where did you get your heatsheild?

BarelyLegalGSX
03-29-2005, 10:25 AM
mitsubushi. its a stock heat sheild!

whitegst97
03-29-2005, 10:38 AM
Can someone tell me if this is my T04B v-trim. The comp. cover on my first t04b was different and smaller, it had some trouble and i got this? It's definitely bigger.

http://www.dsmtuners.com/gallery/data/503/4353DSCF0227-med.JPG

This is what i had originally, i didn't have to dent the water line to fit it, unlike with the one above. Comp housing are both .60

http://www.dsmtuners.com/gallery/data/502/4353KIF_0481.JPG

ddimesstalon
03-30-2005, 01:02 AM
Do the people in this thread that have 50 trims have any reviews on how theres performed? I was just wondering since they're so many in this thread. Good or bad it doesnt matter, I just want to know.

0lmytsi
04-02-2005, 01:35 PM
I put down 300awhp at 20 psi on pump gas with a rough tune cause my 255hp fuel pump is overrunning the stock fpr. My mods are exhaust,fmic,afc,660s,255 and clutch and flywheel. Turbo hits 20psi at about 3900rpms. You should be able to find plenty of reviews by searching 50 trim to keep this thread on topic.

UnderPressureDSM
04-05-2005, 12:44 AM
PTE SCM34 vs T25

http://img.photobucket.com/albums/v408/underpressuredsm/myeclipse800x600picture002.jpg

ducatisl
04-05-2005, 06:27 AM
"Before"......."After" :D
s16g vs RS60T
http://www.indygator.com/photogallery/4g63_install_3/IMG_0030%20(Medium).jpg

PDQ_DSM
04-19-2005, 07:04 AM
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wNzc2NDU1NnM0MTNkZmQzMXk1NDE%3D
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wNzc2NDU2NnM0MTNkZmQzMXk1NDE%3D
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wNzc2NDU3NnM0MTNkZmQzMXk1NDE%3D
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wNzc2NDYyNnM0MTNkZmQzMXk1NDE%3D
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wNzgwODY3NnM0MTNkZmQzMXk1NDE%3D

ducatisl
04-19-2005, 08:42 AM
PDQ, that's pure 100% DSM porn :P ... sigh.

BarelyLegalGSX
04-19-2005, 09:58 PM
PDQ, that's pure 100% DSM porn :P ... sigh.


i cant wait to get mine! gosh that thing is sexy!

evil~eagle
06-28-2005, 11:12 AM
New setup for my car FP3575 turbo from the previous fp3065.

http://im1.shutterfly.com/procserv/47b5d804b3127cce92325a8c102a00000016108AZMXLZo4ZNP

http://im1.shutterfly.com/procserv/47b5d804b3127cce92325b76504800000016108AZMXLZo4ZNP

http://im1.shutterfly.com/procserv/47b5d804b3127cce92325a8a102c00000016108AZMXLZo4ZNP

me shakes fist
06-28-2005, 11:34 AM
http://s92310281.onlinehome.us/images/DSCN1062.JPG

AGP L2R. Should be a nice difference from the evo 16g :cool: ...once I get it on anyway. I need to fab up an o2 housing/downpipe to fit the external wg. I'm just waiting for the flanges and bends to arrive from RRE.

eddy90604
07-15-2005, 10:21 PM
those are some sick turbos..!
dsm power

eddy90604
07-15-2005, 10:21 PM
those are some sick turbos..Keep the mods going show them whos boss
dsm power

tdubz04
08-01-2005, 06:51 PM
here is my new 16G EVOIII
http://memimage.cardomain.net/member_images/9/web/2061000-2061999/2061359_20_full.jpg
http://memimage.cardomain.net/member_images/9/web/2061000-2061999/2061359_21_full.jpg
and this is of the other goodies that go in with th new turbo
http://memimage.cardomain.net/member_images/9/web/2061000-2061999/2061359_22_full.jpg

Idaho_GST
08-11-2005, 11:34 PM
kick ass pics tdubs, just what i was lookin for! thanx!

tdubz04
08-13-2005, 11:47 AM
kick ass pics tdubs, just what i was lookin for! thanx!
sure. i have a digi cam so let me know if you want specific pics i'll take em.

cdale
08-14-2005, 12:16 AM
My little Frankenstien:
http://img212.imageshack.us/img212/2646/phto00233wb.th.jpg (http://img212.imageshack.us/my.php?image=phto00233wb.jpg)

http://img212.imageshack.us/img212/2646/phto00251wb.th.jpg (http://img212.imageshack.us/my.php?image=phto00233wb.jpg)

turbo21psi
10-22-2005, 12:21 AM
I hope it spools.

http://img.photobucket.com/albums/v672/turbo21psi/turbo008Medium.jpg

http://img.photobucket.com/albums/v672/turbo21psi/turbo007Medium.jpg

http://img.photobucket.com/albums/v672/turbo21psi/turbo006Medium.jpg

http://img.photobucket.com/albums/v672/turbo21psi/turbo001Medium.jpg

Iceman21
10-22-2005, 12:52 AM
DNP manifold with a V-band wastegate flange. NICE.

What is the turbo?

french_hustler
10-22-2005, 02:13 AM
^manifold is niiiiiiiiiiice......

colonelfox
10-22-2005, 01:03 PM
I hope that thing doesn't suck in small children. :eek:

turbo21psi
10-23-2005, 12:53 AM
Turbo is a GT-61 from Innovative Turbo.

That thing has been sitting under dirty laundry for years now :D . I started a project a few years ago when my 1G GST broke the t-belt. I kinda lost interest for a few years and now I feel like starting what I left off, only this time I have AWD and a 2g.

My GSX now is still rather stock so I still have more work to do before I can finally bolt those on. Hopefully by next summer if I don't run into any snags with the 6-bolt I'm building.

colonelfox
10-23-2005, 07:52 AM
Really? I had a GT61 a few months ago (hate myself for selling it), but your intake looks larger. Maybe it's just the pic.

Eaglesfly
10-23-2005, 02:18 PM
http://www.yellowliquid.com/~eaglesfly/IMG_8057.jpg It spools decently on my 2.0L. I have a T67 with a T3 hot side (.82) and I get full boost at 5200. Granted, my redline is 9200, so it's a wide power band.

Eaglesfly
10-23-2005, 02:33 PM
Here's a better picture, the other one just doens't do justice, and the stupid 10 minute edit window...

http://www.yellowliquid.com/~eaglesfly/Turbocloseup.JPG

cobrajetguy
10-23-2005, 06:27 PM
Heres my BR20G, not to big but pulls like a son of a gun:

gimmie11s
10-23-2005, 06:58 PM
Heres my BR20G, not to big but pulls like a son of a gun:


where?


?

jas0220
10-25-2005, 09:18 AM
kind of dirty, but here's my t3/t4 60-trim

http://memimage.cardomain.net/member_images/7/web/643000-643999/643637_220.jpg

DSMonster
10-29-2005, 05:38 PM
i recently took a trip down to AMS and checked out there new dyno and what not , but the real spectical was this turbo. this is Chrisevo's new manifold and turbo setup.
you might have seen his videos on SRvidz.com its that black evo. but anyways....enjoy.
http://i18.photobucket.com/albums/b114/Jake2988/chrisevo1.jpg

this is a picture of it next to a evo3 16g.
http://i18.photobucket.com/albums/b114/Jake2988/chrisevo2.jpg

Boost Lee
11-07-2005, 04:04 PM
Funny, my friend has one similar on his Talon. :)

http://img385.imageshack.us/img385/1318/koppfront3dw.jpg

90BlueGSX
11-07-2005, 09:42 PM
^^ i wounder how much HP are you guys running with that fat turbo??

DSMonster
11-07-2005, 10:36 PM
^^ i wounder how much HP are you guys running with that fat turbo??
lil over stock,hahaa
the turbo gets to full boost at just over 5k rpm bolted on to 2Liter 4g63.

Boost Lee
11-08-2005, 08:30 AM
620 whp @ 30 psi / 2.0L

There is a lot left in the turbo, and he hasn't touched the nitrous yet. Still on Eagle rods..

16g-95GSX
11-08-2005, 09:24 AM
2 wastegates on a 4 cylinder.

V8s_are_slow
11-14-2005, 03:43 PM
Here's my new turbo and manifold I just got thursday for my 2.3 stroker project I'm currently building :D Bought the turbo AND the manifold for $1k. Almost new...lucky me.

http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_51_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_52_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_53_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_54_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_45_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_56_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_57_full.jpg

I have more of the T-67 compared to a 14b and 20g with a TD06 compressor housing if anyone cares to see.

BroBoost
11-14-2005, 08:29 PM
sure post away.

NonTURBO4now
11-14-2005, 08:32 PM
i really wish i could turbo out my car...that turbo looks sick

V8s_are_slow
11-14-2005, 09:37 PM
sure post away.

I'll have to maybe post it later this week. Forget my SD card at my parents house. Crap...but don't worry, I won't forget.

twisterad3
11-16-2005, 02:24 PM
I felt all special because i my T04e should arrive soon... now I just feel like I may as well keep a 14b. 8^(

zimus
11-17-2005, 08:11 AM
http://img.photobucket.com/albums/v445/zimus/000_0478.jpg

zimus
11-17-2005, 08:14 AM
http://img.photobucket.com/albums/v445/zimus/000_0477.jpg

V8s_are_slow
11-20-2005, 03:12 PM
Okay and here's the stock 14b versus the new T-67. Notice how the T-67 could just about eat the 14b :D

http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_62_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_63_full.jpg

gimmie11s
11-20-2005, 05:55 PM
Okay and here's the stock 14b versus the new T-67. Notice how the T-67 could just about eat the 14b :D

http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_62_full.jpg
http://memimage.cardomain.net/member_images/12/web/684000-684999/684425_63_full.jpg

nice hurry up and wait turbo.

:)

razorawd
11-20-2005, 07:03 PM
Say hello to my little friend. OKay Okay its not that big.

http://i11.photobucket.com/albums/a187/razorawd/turbo2.jpg
http://i11.photobucket.com/albums/a187/razorawd/turbo.jpg

Spoolin69
11-20-2005, 07:39 PM
Here are my pics of when my turbo showed up, Notice the excitement on my face :D ENJOY.

http://pg.photos.yahoo.com/ph/shane_steffens2002/album?.dir=/362f

Shane

b00st3d
11-20-2005, 08:25 PM
here's my starion's

http://2.6liter.com/userfiles/MrBoost/turbo.jpg

b00st3d
11-20-2005, 08:28 PM
and my Laser's
http://2.6liter.com/userfiles/MrBoost/DSC00052.JPG

gimmie11s
11-22-2005, 08:27 PM
Here are my pics of when my turbo showed up, Notice the excitement on my face :D ENJOY.

http://pg.photos.yahoo.com/ph/shane_steffens2002/album?.dir=/362f

Shane


nice finger nail polish. :)

Tenacious-B
11-22-2005, 09:37 PM
Here are my pics of when my turbo showed up, Notice the excitement on my face :D ENJOY.

http://pg.photos.yahoo.com/ph/shane_steffens2002/album?.dir=/362f

Shane

That poor poor turbo. What in the world did it do to you? :eek:

Spoolin69
11-23-2005, 03:19 AM
nice finger nail polish. :)
I'm not a freak:P those are my wifes fingers:D But she says thanks for noticing!! lol

Spoolin69
11-23-2005, 03:20 AM
That poor poor turbo. What in the world did it do to you? :eek:
Nothing..............................It just deserved it!!:eek: LOL!!!!!

wrx19
12-28-2005, 06:45 PM
http://www.llarian.net/~gomer/nwdsm/nightshotsuw2005/UW%20Shoot%203.jpg

wrx19
12-28-2005, 06:46 PM
oh yea...^^^It's a PTE GT30R Ball Bearing Anti-Surge housing etc. l337 pwnage, you know the drill.

K_Mans_TSI
12-28-2005, 07:48 PM
Nothing..............................It just deserved it!!:eek: LOL!!!!!


lol you're giving it the ol captain morgan in that pic

95gstb16G
01-14-2006, 09:22 AM
My FP3052
http://www.relentlessmethods.com/images/new_engine_buildup/turbo_on_manifold.jpg

Spoolin69
01-14-2006, 01:36 PM
lol you're giving it the ol captain morgan in that pic
I never thought of it that way before:rolleyes: But now I love it:D Thanks for noticing.
Shane

Snap
01-20-2006, 02:26 PM
It's in there, somewherehttp://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjcxMjQ1NnM0MTNkZmQzMXk1NDE%3D.jpg

Where can I get that heat shield at?

Iceman21
01-20-2006, 02:29 PM
Where can I get that heat shield at?

That is a stock heat shield.

colonelfox
01-22-2006, 05:20 PM
I've been lazy, but after several years here's an updated pic.
http://www.dsmtalk.com/gallery/data/500/Turbo_1024.jpg

tg93gsx
02-01-2006, 08:52 PM
here is my evoIII 16g that I ported my self. So far no boost creep with stock flapper @ 10psi, so I am happy. Oh yeah I have a SSautochrome o2 housing also.
http://www.dsmtalk.com/gallery/data/500/medium/2006_0117Image0012.JPG

http://www.dsmtalk.com/gallery/data/500/medium/2006_0117Image0013.JPG

http://www.dsmtalk.com/gallery/data/500/medium/2006_0130Image0035.JPG

Iceman21
02-01-2006, 09:48 PM
http://www.dsmtalk.com/gallery/data/500/medium/2006_0117Image0012.JPG


Port that inlet as well.

talonturbo2
02-12-2006, 12:23 AM
here's a picture of my turbos. guess what's in the 16g turbo. it's pretty close to the 60trim.....

http://photobucket.com/albums/f82/talonturbo2/?action=view&current=DSC01267.jpg

http://photobucket.com/albums/f82/talonturbo2/?action=view&current=DSC01267.jpg]
http://photobucket.com/albums/f82/talonturbo2/?action=view&current=DSC01267.jpg

Pookers
02-12-2006, 08:02 AM
http://photobucket.com/albums/f82/t...nt=DSC01267.jpg
http://photobucket.com/albums/f82/talonturbo2/?action=view&current=DSC01267.jpg
http://photobucket.com/albums/f82/talonturbo2/?action=view&current=DSC01267.jpg


there fixed it for ya

V8s_are_slow
02-12-2006, 09:13 AM
Few updated pics of my turbo.

http://i37.photobucket.com/albums/e63/v8s_are_slow/CarParts003.jpg
http://i37.photobucket.com/albums/e63/v8s_are_slow/CarParts002.jpg
http://i37.photobucket.com/albums/e63/v8s_are_slow/CarParts005.jpg

oztofrdm
02-12-2006, 03:24 PM
Just a little old 35r with an .82 A/R housing that i have laying around for a rainy day

blkturbo2nv
02-12-2006, 03:58 PM
http://www.llarian.net/~gomer/nwdsm/nightshotsuw2005/UW%20Shoot%203.jpg
Where did you get the carbonfiber piping???????? How much PSI can it withstand?
I would like to carbonfiber pipe my hole set up (intercooler pipe ect.) :D

Spoolin69
02-12-2006, 05:57 PM
I found a couple more pics of the (real) EVO III.



http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_17_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_18_full.jpg

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_19_full.jpg
The old "Captin Morgan Pose"
http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236467_20_full.jpg

elementone
02-21-2006, 05:53 PM
my new cup holder ;)
http://static.flickr.com/34/102802997_1c82c492d0.jpg

11secdsm
02-21-2006, 05:56 PM
Looks similar to mine...

http://i21.photobucket.com/albums/b279/11secdsm/tripturbo015.jpg
http://i21.photobucket.com/albums/b279/11secdsm/tripturbo016.jpg
http://i21.photobucket.com/albums/b279/11secdsm/tripturbo019.jpg

eugenile
02-21-2006, 08:41 PM
damn look at how small the 16gs are starting to look compared to the more common big turbos these days,

but with cars is it the same concept when we say its not the size that matters? lol

TwighlightGSX
02-22-2006, 10:44 AM
I'm still waiting for my FP3052. Maybe I will post a picture of me licking the compressor housing. Turbogasms.... TURBOGASMS!!!!!

Extremedsm
02-22-2006, 10:59 AM
New turbo................... :eek:

TwighlightGSX
02-22-2006, 11:52 AM
New turbo................... :eek:
Hmmmm, not bad for $50.00!!!!!! Do they have any more of those?!!? That would make a nice decoration, in fact, an excellent display in MY room!

Extremedsm
02-22-2006, 11:56 AM
That is the only one that the guy had. That damn thing weighs 46 pounds!!!

TwighlightGSX
02-22-2006, 12:04 PM
That is the only one that the guy had. That damn thing weighs 46 pounds!!!
Give me that one you have!!!! I want it!!! J/K!

Extremedsm
02-22-2006, 12:11 PM
It says roto-master on the compressor housing and there is a tag on it that says T46. We think it is from some big earth moving machine or something. Thing is very interesting.

kevstyle
02-22-2006, 01:15 PM
Here's my port and polished 14b compressor cover. Rebuilt the turbo thats why its all apart right now. Plan on running it at 18psi on rebuilt 4G63 with all supporting mods.

http://img145.imageshack.us/img145/7490/polished14b24ex.jpg

fulanititoo8198
02-22-2006, 02:03 PM
my uncles dads brothers

TwighlightGSX
02-22-2006, 04:14 PM
It says roto-master on the compressor housing and there is a tag on it that says T46. We think it is from some big earth moving machine or something. Thing is very interesting.
I am not leaving without that turbo!!!! Give it to me!!!

Extremedsm
02-22-2006, 05:29 PM
I am not leaving without that turbo!!!! Give it to me!!!

LOL!!!!!!!!!!!!!!! :D

TwighlightGSX
02-23-2006, 04:52 AM
LOL!!!!!!!!!!!!!!! :D
Fine, then I will just get my own GT40R for about $2100.00. It may take me awhile to get it, but at least it'll be more shinier once I get it polished so that I can display it in the garage. So what if you saved $2050.00 on that turbo. Maybe I'll end up installing it in my ride, well, in a couple of years. HA!!!

dreaminskyline
02-23-2006, 06:03 AM
http://www.yellowliquid.com/~eaglesfly/IMG_8057.jpg It spools decently on my 2.0L. I have a T67 with a T3 hot side (.82) and I get full boost at 5200. Granted, my redline is 9200, so it's a wide power band.


That's a diiiiiiiirty filter. I think I can see a leaf in there...lol... :P

oztofrdm
02-23-2006, 01:05 PM
Damn guys it looks liket theres gonna be a whole lot of new 11-10 sec cars this season with all of these GT 30 series turbos showing up

Sleeper7
02-23-2006, 01:22 PM
Not as big as some of the monsters in here. New 60 trim :D

pepsi21463
02-24-2006, 02:04 AM
http://i23.photobucket.com/albums/b392/pepsi21463/DSM/IMG_0353Medium.jpg

TwighlightGSX
02-27-2006, 10:41 AM
They are still building my turbo. I can't hold out much longer!!!!!

XCalibirTsi95
02-27-2006, 09:24 PM
oh it's in there somewhere.. lol

http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0256.jpg

not really a turbo shot, but right next door.. anyone notice a bad situation here,, notice the black on the intercooler piping... :mad:
http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0258.jpg

AWD_4g63
02-28-2006, 06:42 AM
Myne...

http://www.dsmtalk.com/gallery/data/500/parts3.JPG

http://www.dsmtalk.com/gallery/data/500/parts4.JPG

TwighlightGSX
03-02-2006, 04:49 PM
Sorry to be off topic, but for those who have the FP3052, how long did you have to wait to receive the turbine? I am just a little concerned, because I have been screwed in the past, and this is the first part that I have ever ordered. How long is the building process? I just wanted to show off the shiny new turbine on this thread, thats all.

TwighlightGSX
03-03-2006, 10:22 AM
Sorry to be off topic, but for those who have the FP3052, how long did you have to wait to receive the turbine? I am just a little concerned, because I have been screwed in the past, and this is the first part that I have ever ordered. How long is the building process? I just wanted to show off the shiny new turbine on this thread, thats all.
Forget what I just typed. I just need to STFU and just be patient. Looking at these turbines just gets me all worked up.

Extremedsm
03-03-2006, 11:07 AM
oh it's in there somewhere.. lol

http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0256.jpg

not really a turbo shot, but right next door.. anyone notice a bad situation here,, notice the black on the intercooler piping... :mad:
http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0258.jpg

You need to get the sledge hammer out!!! :eek:

EclipseRST
03-03-2006, 02:41 PM
FP58... (old school 3065)

http://i4.photobucket.com/albums/y115/Jake31/DSC00367.jpg

http://i4.photobucket.com/albums/y115/Jake31/DSC00366.jpg

0lmytsi
03-03-2006, 08:25 PM
Where did you get the carbonfiber piping???????? How much PSI can it withstand?
I would like to carbonfiber pipe my hole set up (intercooler pipe ect.) :D

There is no psi before the turbo...

_DeS_
03-07-2006, 07:23 AM
wow i was impressed with getting a td06h 20g.. but now i think i want bigger... guess i have to w8.......

TwighlightGSX
03-13-2006, 05:36 PM
FP is still building mine's. They said that they are missing a component which is keeping them from assembling the turbine together. Components. American components, Russian components. All made in Taiwan!!! :mad: J/K

thimages
03-15-2006, 07:01 AM
My Gt40R next to my barstool turbo compressor cover (IHI RHB3)

http://206.124.12.138/bturbo.jpg

K_Mans_TSI
03-15-2006, 07:10 AM
oh it's in there somewhere.. lol

http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0256.jpg

not really a turbo shot, but right next door.. anyone notice a bad situation here,, notice the black on the intercooler piping... :mad:
http://i33.photobucket.com/albums/d89/xcalibirgst97/car/IMG_0258.jpg

that's only half your problem, the piping runs under the frame....

TwighlightGSX
03-15-2006, 07:33 AM
My Gt40R next to my barstool turbo compressor cover (IHI RHB3)

http://206.124.12.138/bturbo.jpg
Where and how much $$$$ did you spend on that sexy beast?

thimages
03-15-2006, 07:50 AM
Where and how much $$$$ did you spend on that sexy beast?

The IHI RHB3?

$75 on ebay :D

Hal

TwighlightGSX
03-15-2006, 07:57 AM
The IHI RHB3?

$75 on ebay :D

Hal
The GT40... What is sexy about that piece of IHI? :confused:

thimages
03-15-2006, 08:21 AM
The GT40... What is sexy about that piece of IHI? :confused:

F/P supplied the GT40R

http://206.124.12.138/dryer1.jpg

TwighlightGSX
03-15-2006, 08:32 AM
Stop toying with me with those pics!!! :D I just can't wait til' mine's arrive. Then I will finally get to show it off. I got the 44mm wastegate and the intake pipe from FP, but I am still waiting on the turbine.

SpoolnV8
03-15-2006, 01:23 PM
My old 42R... wasnt for my DSM though
http://img.photobucket.com/albums/v92/spoolnvr4/IMG_0873.jpg
http://img.photobucket.com/albums/v92/spoolnvr4/pic.jpg

oztofrdm
03-16-2006, 06:19 AM
You guys suck, I was all stoked when i got my 35r and now i feel like i should have gone bigger :mad:

91TSiGuy
03-16-2006, 06:45 AM
Don't worry about these other guys. Remember what they say: It's not the size that matters, it's how you use it. ;)

EclipseRST
03-16-2006, 08:28 AM
Thats just something guys with small dicks say. :P

TwighlightGSX
03-23-2006, 03:44 PM
YEEESSS!!! My turbine finally came in!!! :D Now if I can have someone take pics and post it so that you can all start hating. I really can't do anything, since I have to rebuild the motor. Nevertheless, I am still happy for receiving the turbine(FP 3052).

boosted6lbs
04-01-2006, 10:56 AM
just like the title says

kevstyle
04-06-2006, 12:08 PM
Here's a turbo i just got for free! I think it's either a garret t25 or t28 could any one help me out and tell me. It has 3 bolt/ inlet on the exhaust housing.

http://home.comcast.net/~kevstyle/my_garrett_turbo.jpg

BOOSTonU
04-06-2006, 01:13 PM
my RS60T
http://img307.imageshack.us/img307/1923/my6013ur.jpg (http://imageshack.us)

starke19
04-07-2006, 12:56 AM
What was the 42R for? I know two DSM's around here both running 42R's.

Steezy303
04-13-2006, 10:59 PM
my 60-1
http://c.myspace.com/Groups/00011/79/18/11898197_l.jpg

Dsm99gst
04-27-2006, 01:22 AM
http://www.filelodge.com/files/room14/335276/turbodew.jpg

XCalibirTsi95
05-01-2006, 12:00 AM
http://i33.photobucket.com/albums/d89/xcalibirgst97/car/DSC01340.jpg

http://i33.photobucket.com/albums/d89/xcalibirgst97/car/DSC01342.jpg
new power plant going in.. (16g)

oztofrdm
05-01-2006, 06:32 PM
Aww look at that cute little thing. haha you will be wanting more power in no time :P

XCalibirTsi95
05-03-2006, 08:34 AM
Aww look at that cute little thing. haha you will be wanting more power in no time :P

maybe, but it is way better than the 14b that was in the car before...
plus it was already on the 6 bolt that i get to throw in my 95.. I think i will be happy enough for a while.. plus this is going into my DD. If i can run it at 18-20 psi i think i will be very happy...

K_Mans_TSI
05-04-2006, 06:30 PM
only took 2 months

http://f5.putfile.com/5/12314584786.jpg

http://f5.putfile.com/5/12314592754.jpg

http://f5.putfile.com/5/12315000530.jpg

oztofrdm
05-04-2006, 10:13 PM
maybe, but it is way better than the 14b that was in the car before...
plus it was already on the 6 bolt that i get to throw in my 95.. I think i will be happy enough for a while.. plus this is going into my DD. If i can run it at 18-20 psi i think i will be very happy...

I was just messing with you :P I have a b16g right now and cant wait to get rid of it.... once you get it setup for about 20-25psi you will def. be happy for a while and beable to run down alot of cars no problem.

gsxlancer
05-05-2006, 11:47 AM
K Mans TSI got any specs on that thing? Looks like something in the 70-72mm range. I just ordered my 72GTQ.

K_Mans_TSI
05-05-2006, 11:59 AM
PTE 70 .69 a/r hot side was supposed to have the GTS wheel but they pulled it so i don't know if i ended up with S or Q (not that i tmatters all that much to me)

thimages
05-09-2006, 05:09 PM
Started the GT40R install

http://206.124.12.138/rs1.jpg
http://206.124.12.138/rs3.jpg

0lmytsi
05-09-2006, 05:28 PM
Nice, i like the top mount but i would wrap that downpipe!

EclipseRST
05-09-2006, 05:39 PM
What size AN fittings are you using for the radiator hoses? I'm looking to do that soon and wondered what size you were using and if they work good? Nice looking manifold.

thimages
05-09-2006, 05:43 PM
What size AN fittings are you using for the radiator hoses? I'm looking to do that soon and wondered what size you were using and if they work good? Nice looking manifold.


They are -20.

The manifold & d/p will both be wrapped.

The turbine housing will have a blanket on it and be covered by a polished heat shield.

EclipseRST
05-09-2006, 06:20 PM
Looks very nice, wouldnt mind having a top mount manifold for my turbo but the DNP one I have works just fine.

I cant believe how well this fit in my 95 Talon. I had to grind down one of the braces on the DNP manifold and cut a chunk out of the cross member but other than that it bolted in perfectly.
http://i36.photobucket.com/albums/e21/Dragtalon/42r-6.jpg

http://i36.photobucket.com/albums/e21/Dragtalon/42r-4.jpg

:D

talonturbo2
05-09-2006, 09:36 PM
Started the GT40R install

http://206.124.12.138/rs1.jpg
http://206.124.12.138/rs3.jpg

that focker is huge!!!

K_Mans_TSI
05-09-2006, 10:13 PM
http://f5.putfile.com/5/12719401117.jpg

figured i'd throw that one in there

diambo4life
05-09-2006, 10:27 PM
Holy Chit! :shock:

I want a big turbo. :(

verytalonted
05-18-2006, 01:45 PM
Mutt ETE32:
working:
http://i9.photobucket.com/albums/a88/verytalonted/Turbob.jpg
Not working:
http://i9.photobucket.com/albums/a88/verytalonted/Goodfellow025.jpg

blkturbo2nv
05-18-2006, 03:54 PM
There is no psi before the turbo...
That was not the the reply I was looking for :cool:
I woluld like to know how much psi the pipes hold up to to make intercooler pipes out of it. Not for the intake. Also where do you by carbinfiber piping at :confused: Do they sell bends like metal piping?

boosted6lbs
06-03-2006, 06:47 AM
only took 2 months

http://f5.putfile.com/5/12314584786.jpg


How long ago did you buy your turbo? i was wondering because PTE Surge protection housing looks different now!

this is my PTE T67,
http://i55.photobucket.com/albums/g122/danielbui23/DVC00591.jpg

K_Mans_TSI
06-03-2006, 09:25 AM
ordered a month ago, does yours have a 3" outlet? if not its a dif cover

BarelyLegalGSX
06-03-2006, 12:57 PM
sadly mines not as big :(

http://www.dsmtalk.com/gallery/data/500/medium/turbo7.jpg

boosted6lbs
06-04-2006, 04:44 AM
ordered a month ago, does yours have a 3" outlet? if not its a dif cover

4" inlet with a 2.5" outlet

6bolt4bolt
06-07-2006, 07:15 AM
Holset HY35 9cm with 58mm HX40 compressor wheel and machined housing to fit it...

I just need to find a decent t3 manifold to mount this thing on...im thinking an ebay Megan T3 header...

http://img.photobucket.com/albums/v159/shroogis/58a08ac8.jpg
http://img.photobucket.com/albums/v159/shroogis/94d12f73.jpg
http://img.photobucket.com/albums/v159/shroogis/3b27ffa4.jpg
http://img.photobucket.com/albums/v159/shroogis/d5704344.jpg

Dsm99gst
06-10-2006, 02:04 AM
Just thought I would post it up since its just came in the mail yesterday. FP3065 next to RS60T.

http://www.filelodge.com/files/room14/335276/DSC01666.JPG

After installed

http://www.filelodge.com/files/room14/335276/DSC01673.JPG

TaLoNaToR
07-26-2006, 06:22 PM
http://i57.photobucket.com/albums/g239/gsx8ualive/talonturbo.jpg

KScivic
08-19-2006, 06:51 PM
My s16g from Slowboy...

http://img.photobucket.com/albums/v681/hdawg06/DSM/DSMs030.jpg

91_Talon
08-23-2006, 04:42 PM
my 57 trim precision

http://www.dsmtalk.com/gallery/data/500/medium/100_0165.jpg

hand1222000
08-23-2006, 08:01 PM
http://i6.ebayimg.com/01/i/07/f4/90/ef_1.JPG
Here's my turbo I just Ordered off Ebay a 60 Trim bolt-on.

unlmtdndeavor
09-12-2006, 01:54 AM
http://i3.photobucket.com/albums/y89/unlmtdndeavor2/Dsc_7469-s.jpg

http://i3.photobucket.com/albums/y89/unlmtdndeavor2/Dsc_7465-s.jpg

http://i3.photobucket.com/albums/y89/unlmtdndeavor2/Dsc_7459-s.jpg

http://i3.photobucket.com/albums/y89/unlmtdndeavor2/Dsc_0010-s.jpg

http://i3.photobucket.com/albums/y89/unlmtdndeavor2/Dsc_0007-s.jpg

joel_817yz
09-12-2006, 09:25 AM
^ ^ ^ ^
One just messes shorts!

TurboDropTop
09-14-2006, 10:18 PM
Ya dude I'm bout to fight that guy and steal his Turbo, Wastegate, Camera, and ..... Photography skills....

Rediculous pics man

YinYang
09-18-2006, 10:57 PM
My

Precision T & E GT3582RLE

http://i21.photobucket.com/albums/b285/kouyang/PrecisionTurboGT3582RLE.jpg

unlmtdndeavor
09-19-2006, 02:52 AM
man that thing is beefy. i wonder which style of anti-surge ports is better, the holes or the slots on the fp style

yekrahs
10-01-2006, 06:06 PM
http://i72.photobucket.com/albums/i194/yekrahs/3-1.jpg

Just a good ol' 72trim....

badas93tsi
10-04-2006, 06:49 PM
new GT35R

http://i45.photobucket.com/albums/f81/badas93tsi/turbo006.jpg

1QuickChic
10-23-2006, 12:27 AM
My new blowdryer. http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMzg4MDZzNDEzZGZkMzF5NTQx.jpg

dsm475
10-25-2006, 03:29 PM
http://i45.photobucket.com/albums/f68/talon475/756748_31_full.jpg

ralliartist
10-26-2006, 02:57 AM
fp2544 not a real big one, but definitely bigger than my 13g and flows the same as a 20g. Gotta love BB turbos.;)


http://i36.photobucket.com/albums/e30/ralliartist/Project%20Talon%20TSi%20AWD/fp25443inintake.jpg
http://i36.photobucket.com/albums/e30/ralliartist/Project%20Talon%20TSi%20AWD/rebuild/compressorcompare.jpg
http://i36.photobucket.com/albums/e30/ralliartist/Project%20Talon%20TSi%20AWD/rebuild/turbineinletcompare.jpg
http://i36.photobucket.com/albums/e30/ralliartist/Project%20Talon%20TSi%20AWD/rebuild/hey.jpg

dsmbuilder
10-26-2006, 03:28 AM
so whats up with the compressor outlet, did it have an elbow welded on?

ralliartist
10-26-2006, 03:40 AM
yea, it was pointed in the direction of having a FMIC. The guy I bought it from had it cut off cause he stayed on a side mount and I plan on staying on a side mount for now as well so I don't plan on welding it back on anytime soon. I'll keep it though for future mods.

White91TalonTsi
11-27-2006, 11:53 PM
Anyone have good pics of their FP green? :)

1990 Dsm Gsx
11-28-2006, 01:37 AM
I hate you guys. :(

4SFED4
12-01-2006, 04:05 PM
New S366 from Bullseye.
4" inlet ported shroud/ 2.5" V-band outlet
66mm inducer-- 80 lbs/min

http://www.we-todd-did-racing.com/files/968432_8dzws/S366.jpg

JustinGSX
12-01-2006, 05:06 PM
http://usera.imagecave.com/JustinGST/current.jpg

http://usera.imagecave.com/JustinGST/current3.jpg

White91TalonTsi
12-03-2006, 09:14 PM
Out with the old...

http://i73.photobucket.com/albums/i222/Jabalee/000_1031.jpg
http://i73.photobucket.com/albums/i222/Jabalee/000_1030.jpg

DSMonster
12-03-2006, 09:41 PM
nothing special, just your typical scm61...
http://i18.photobucket.com/albums/b114/Jake2988/scm61/scm5.jpg
http://i18.photobucket.com/albums/b114/Jake2988/scm61/scm6.jpg
http://i18.photobucket.com/albums/b114/Jake2988/scm61/scm7.jpg

Ken81590
12-11-2006, 05:34 PM
http://i31.photobucket.com/albums/c372/soufeastpenn/things_004.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/things_005.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/things_006.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/things_007.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/things_009.jpg

http://i31.photobucket.com/albums/c372/soufeastpenn/things_010.jpg

K_Mans_TSI
12-11-2006, 06:08 PM
http://myspace-929.vo.llnwd.net/01505/92/91/1505631929_l.jpg

Iceman21
12-12-2006, 10:19 PM
Ken, is that just a polished housing or a completely different housing?

91TSiGuy
12-12-2006, 10:35 PM
http://i31.photobucket.com/albums/c372/soufeastpenn/things_004.jpg

Nice clean toolboxes. Either you just bought them or you haven't owned a DSM for that long. :D

Ken81590
12-13-2006, 04:54 PM
Ken, is that just a polished housing or a completely different housing?

its a new bullseye housing

Ken81590
12-13-2006, 04:56 PM
Nice clean toolboxes. Either you just bought them or you haven't owned a DSM for that long. :D

just bought them, still no tools in them yet, they are still all spread out throughout my car and the work bench lol

boosted6lbs
12-17-2006, 07:39 AM
http://i55.photobucket.com/albums/g122/danielbui23/DSCN3854.jpg
http://i55.photobucket.com/albums/g122/danielbui23/DSCN3852.jpg

I thought I might repost my pics but now the 67mm has been polished. It still needs alittle more work with more polishing compound cream.

Chicago_DSM
12-17-2006, 09:10 AM
http://i31.photobucket.com/albums/c372/soufeastpenn/things_010.jpg

Dude, what kind of housing is it on the 16g?