quarter panel

[greenstreak]

Does anyone have experience with the removal and replacement of the rear quarter panels on a 2g dsm. I was hit by an old man over the weekend and the pas. quarter panel was destroyed. I am trying to figure out if this is a project I can do on my own. I mainly need to know how it is held on (rivets, welds, bolts). It doesn't sound too hard but I don't want to get into something I can't finish. Thanks

[Rdy2race]

AHHH a real Q =-)

Well hate to tell ya but leave this to the Pro's. it is welded and plastic ( bondo ) that holds it on and makes it look good. Depending on the hit it could be fixed with a dent puller and a skilled Plastic man but to replace will cost a good amount and in the long run is the correct fix

[greenstreak]

Thanks man. After looking at it in the light and pulling back some of the seam sealer I came to the same conclusion. Time to make a body shop appointment!!

Here is what the damage looks like by the way. :(
http://if.yimg.com/f/698dc9b7/h/3f2fc9d/bangup.jpg