PDA

View Full Version : nology wires




99eclipseinjersey
03-01-2001, 09:26 PM
ok so i am wondering...is nology over rated... i mean a set of wires costs approximately 150 bucks...... is this really a good investment....is it worth the cash.... i am looking to do some performance mods....and ideas would be greatly appreciated...

and other companies that are comparable at a lower price...

thanx

coop




gsxalex
03-02-2001, 12:02 AM
I personally haven't heard of anyone useing the nology wires. I'd be interested to here peoples experiences with them as well.

But i can say this, I have heard of several people having problems with the magnecores. We were getting very bad misfires in my freinds gsx with a reletivly new set of these wires.
A simple swap to the much less expensive accel wires cured the problem. I've heard the accel wires have a lifetime garantee too, anyone know about this?

harry99GSX
03-03-2001, 11:46 PM
You would be better off with either the Magnecores or ACCEL wire sets. Those Nology sets are geared more towards lower output ignition systems. That is why they use the capacitive discharge system. I have yet to hear any good things about there use on turbo DSM's. I would even recommend NGK wire sets before spending the extra cash on the Nologys. I see NO justification for the price of Nologys.

Mannai
03-04-2001, 01:03 AM
Well I have Nology wires, Never had a problem with them and never saw any gains with them. So dont buy them.


People say that they ground alot. Because the wire splits and you have a ground, people complain that the wires sometimes would send the electricity to the ground instead of going to the plugs.

I never had this problem, but I would buy the Magnecor because its cheaper.

MoBoost
03-04-2001, 03:13 AM
Nology are very "fancy" - I had 'em on my 3kvr4. I haven't heard of any gains from other than vendors.
VERDICT: magic product with 0 to 12.81% gains .... mostly 0.