Downpipe that bolts to stock cat? [Archive] - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum:

: Downpipe that bolts to stock cat?

07-13-2003, 07:15 AM
Anyone know of an aftermarket down pipe for a 1G AWD that will bolt to the stock cat?

07-13-2003, 11:26 AM
I don't think any that are 3inches will, but when I had my DSM-Performance 2.5inch DP it bolted to the stock cat.

07-13-2003, 11:48 AM
That was for a 1G?

07-13-2003, 11:52 AM
No it was fora 2G but any 2.5 inch dp will bolt a stock cat. with a 3inch the flange and the pipe size is just to big.

07-13-2003, 11:58 AM
Ok awesome. Thanks for the info! Im planning on welding the qtec cutout into the DP and running a stock cat and catback. So that will work great! i think a 2.5 DP dumping to the atomosphere will be all the exhaust i need...:D

07-14-2003, 12:08 PM
apexi/RSR have an reducer-adapter that bolts on to stock cat
remove to bolt up to their catback

07-14-2003, 02:59 PM
Ok and are you talking about 1Gs too? i know they dont make RSRs for 1Gs. I just need a 2.5" aftermarket DP for a 1G awd that will bolt up to a stock cat. But i guess all 2.5" DPs will hook up to the stock cat.

07-16-2003, 11:41 PM
you might wanna check pacesetter. I know they have a 3" for the 2nd gen that bolts to the cat. I think their site is Hope this helps, Andy