DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

Non-lowering springs

2K views 2 replies 2 participants last post by  sgtpepper67 
#1 ·
My car, a 1992 awd laser rs, needs new coil spring all the way around.
It currently has a set a grey lowering springs installed, I'm not sure of the brand.
It's lowered to the point that it will scrape the exhaust pipe, transmission, and inter cooler on the ground whenever I hit bumps or pull into driveways.
I would much rather just return the car to the stock ride height.
I have been able to find new Mitsubishi springs for the front but I can't find any for the rear.
None of the local parts stores can get replacement, and everywhere online lists them for sale but after ordering, they return my payment saying they have been discontinued.

So my question is, is there a good source for replacement stock height rear coil springs? Any advice otherwise?

I just peeled the bottom of my inter cooler off a couple nights ago and would really like to avoid any more damage from the car sitting too low. :/
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top