DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

V-band downpipe?

10K views 5 replies 5 participants last post by  DSM_Aruba 
#1 ·
Does anybody sell vband downpipes or vband o2 housings? I would rather to try find one than to hassle with having one fabbed. if i could find a v-band o2 housing to go to my existing downpipe, that would be great also. I have searched a little bit and can't come up with anything so far.

2g awd 3" vband.

Thanks guys.
 
#2 ·
I got a VBand O2 off ebay.
Auto part Automotive exhaust Muffler Metal

Auto part Bicycle part Exhaust manifold Rim Bicycle stem

When it came the said SSAC on box. Look to be good welds. $90.
Its flanged for Tial 46 and 3" VBand.

I'm going to get a 3" downpipe, cut off the stock flang and weld on VBand.
Having trouble finding a cheap 3" though, largest I can find is 2.75" so far.
 
#3 · (Edited)
Sorry, I should have been more specific. The outlet on the turbo hotside is vband. But if the o2 housing like you bought was vband on both ends, and 3", then it would be right up my alley. haha. Thanks anyway man.

And I am not too awful worried about it being extremely cheap, i just dont want to drop $600 or so on a custom one right now.
 
#4 ·
Ceddy said:
I got a VBand O2 off ebay.
View attachment 4380
View attachment 4381
When it came the said SSAC on box. Look to be good welds. $90.
Its flanged for Tial 46 and 3" VBand.

I'm going to get a 3" downpipe, cut off the stock flang and weld on VBand.
Having trouble finding a cheap 3" though, largest I can find is 2.75" so far.
That won't bolt up to a stock dp if just the flange is modified.

That o2 housing is much longer than the stock/OEM.
 
#6 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top