DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

Starting problem

2K views 1 reply 2 participants last post by  Sean485 
#1 ·
I recently did a rack and pinion on my 96 Gst..the Rpi relay is good and also have current going through. The wires that goes to the fuel pump and connects to the fuel pump does not have current...what can be my problem?


Sent from AutoGuide.com Free App
 
#2 ·
This post is incredibly confusing. Does the car turnover? The fuel pump is activated by the ecu and chances are nothing with the rack would affect it unless you got some wiring pinched somewhere. Check the no start sticky at the top of help tech.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top