No rush, I'm just getting greedy I was asking more about the differences between the 1g models - I think at least a few pins are different on the 90's. Not that you have to figure out all the details...just want to make sure there isn't any misinformation here. What year/model did this come from? Great job on this 1g harness and thanks for the contribution.
I have seen that (and thank you) but there are diagrams floating around that say the wires #6 and #14 actually have the colors swapped in the factory harness between a 90 and 91 and up. Is that the case or am I looking at a f'ed up set of diagrams?
These are the diagrams I was referring to. The actual color of the wire is said to be opposite between the two. Is that the case or are all harnesses the same? Seems odd now that I think of it that they would switch the color of only two wires out of all of them really.
I don't have them handy right now but I would compare the two versions of the complete drawings for that subsystems (that isincluding the sensor/actuator, harness and ECU). If I remember correctly there was something different in terms of pinout of the ISC too.
It would have been better if you kept it all in one thread...I think I answered your question in the other thread. The wire colors are the same regardless the year (within 1G), they just go to different places.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum
2.3M posts
102.7K members
Since 2000
A forum community dedicated to Mitsubishi Eclipse, Plymouth Laser and Eagle Talon owners and enthusiasts. Come join the discussion about performance, turbos, builds, modifications, troubleshooting, maintenance, and more!