so the racetrack was closed today so i decided to take the time to install my 2g maf. I soldered it up, 1 wire at a time, accodring to vfaq and when i turned the car on i got a CEL. I plugged in my dsmlink and checked the code... Air Intake Temperature Circuit ... The car idles right, it seems to be running slightly rich at idle and my airflow/rev is slightly low also.
I thought i might have made a wiring mistake and this is what i had the first time i wired it up:
2g PIN - 1g wire color
1 - Green wire, red line, red stripes
2 - Green wire, yellow line, red stripes
3 - green wire, blue line, red stripes
4 - Red wire, black stripes
5 - Green wire, black line, Red stripes
6 - Green wire, white line, red stripes
7 - Green wire, orange line, Red stripes
8 - nothing
Now i looked at vfaq and it seems like i had pins 6 and 7 wrong... so i switched em. Still exactly the same. The vfaq instructions have confused me every time i look at it so thats why i thought i wired it incorrectly.
Does anyone know if i wired it correctly?
Which one was right, how i have it posted up there, or with pins 6 and 7 switched?
Could the maf be bad?
The plug i used for the 2g maf was a 1g power transistor plug so i had to take it apart according to vfaq and move one wire... could i have damaged the wiring in the plug while pulling the other one?
Anyone run into this problem and know how to troubleshoot?
i posted up on the dsmlink forums also with a couple logs but i havent gotten any responses yet.
any help is appreciated
thanks
danny
I thought i might have made a wiring mistake and this is what i had the first time i wired it up:
2g PIN - 1g wire color
1 - Green wire, red line, red stripes
2 - Green wire, yellow line, red stripes
3 - green wire, blue line, red stripes
4 - Red wire, black stripes
5 - Green wire, black line, Red stripes
6 - Green wire, white line, red stripes
7 - Green wire, orange line, Red stripes
8 - nothing
Now i looked at vfaq and it seems like i had pins 6 and 7 wrong... so i switched em. Still exactly the same. The vfaq instructions have confused me every time i look at it so thats why i thought i wired it incorrectly.
Does anyone know if i wired it correctly?
Which one was right, how i have it posted up there, or with pins 6 and 7 switched?
Could the maf be bad?
The plug i used for the 2g maf was a 1g power transistor plug so i had to take it apart according to vfaq and move one wire... could i have damaged the wiring in the plug while pulling the other one?
Anyone run into this problem and know how to troubleshoot?
i posted up on the dsmlink forums also with a couple logs but i havent gotten any responses yet.
any help is appreciated
thanks
danny