|
I had buddies that used to work at Circuit Shitty. Make sure that all the power wires are run on the opposite side of the RCA cable that feeds your amp. Interference is almost certain if they are close. Any time that the wires do have to cross, make sure they cross at a 90 deg angle. Look behind your dash to see that signal wires do not cross power wires also. Make CC fix it.
Great reply! Make CS ooops, I mean CC fix it! You paid for it!
__________________
2001 Db Drag Racing World Champion 1-2 sub extreme 172.4 db
2002 2nd place 3-4 sub extreme Db Drag Racing World Finals 174.8
2003 1st place Canadian Performance Worlds
2003 1st place Spring Break Nationals Daytona Beach Fl
TEAM HERTZ
|