Re: SD installed, VE table smoothing help.
What fuel are you using?
There are major jumps in the VE that are causing major jumps in the tune, which is obvious. If you'd like I can make you a smoother VE table and clean up both the open loop and timing tables as well.
'97 Talon AWD - 6 bolt block/head | 8.5:1 Mahle/Eagle | 60mm HX-40(T3 .70 A/R) | ERL T3 manifold | SBC SS-X/B clutch | HKS 272s | VRSF FMIC | 3" exhaust | Cyclone Intake(T25 actuated) | Walbro 450 | FIC Hi-Z 2150s | BR8ES @ .018" | DSMlink V3 (SD) | Flex Fuel
565 awhp 524 lb/ft <-- 2010 56mm HX40
'98 Spyder GS-T - FIC 850s | Walbro 255 | HKS 264 cams | RVR Hyper Sport 16g | 3" exhaust | Punishment FMIC | ACT 2100 | ACT flywheel | DSMlink V3 (SD) | Flex fuel