Re: MBC for Cyclone manifold operation?
It would work, but honestly stick with it being electronically controlled via ECMLink. You gain peak power and torque, and decrease spool up the best when you let it activate at 5500rpm. Myself, and MindBlowin03 have pretty good experience with this, and MindBlowin' himself has some back to back dyno pulls where it shows he gained the most tq(like 50awtq) letting it open at the proper RPM. I can't remember how long ago this was though. It was on an HX40 w/ a BEP .70 T3 housing.