DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

420a sway bar link removal

1298 Views 3 Replies 3 Participants Last post by  wyv344
I'm having trouble removing the bolts for the sway bar links on the passenger side on my 420a 2g eclipse. I've used a wrench, and even used a bolt extractor, and needle nose vice grips
Automotive tire Automotive exhaust Automotive fuel system Automotive lighting Vehicle brake
See less See more
1 - 4 of 4 Posts
Douse the bolt with PB Blaster and let sit overnight. Use a breaker bar with an extension and hope that it breaks free. Good luck.
Maybe, i should elaberate, ive been able to remove the endlinks, bushings and brackets, but i cant seem fanagle the actually sway bar out from the car. Is the a way to take it off without removing the exhaust, is there a way to temporarily mount the bar while being disconnected from the suspension, is there a secret cheat code i havent type in?
https://www.routerlogin.net/
pikashow
Maybe, i should elaberate, ive been able to remove the endlinks, bushings and brackets, but i cant seem fanagle the actually sway bar out from the car. Is the a way to take it off without removing the exhaust, is there a way to temporarily mount the bar while being disconnected from the suspension, is there a secret cheat code i havent type in?
You can remove the bolts for crossmember for the transmission as well as removing the bolts the downpipe for the exhaust so that you can get a little more wiggle room for the sway bar
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top