DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
334 Posts
Discussion Starter #1
on my s-afc my afl stays at 0.0% and the prs stays at -760mmhg. Is it supposed to be like that...or did the person that installed it mess up?

any my rpm is like half low...it works...but the readin on the s-afc is like 14XX when my real rpm is about 3k. Anyone know why.....i did a
for this and i saw someone said sumthin about changing the cylinder setting on the s-afc to 2 cylinders because there are two wires you could hook the rpm up to and with one of them its like half or sumthin...i dunno...please help. Thanks in advance.
 

·
Elite DSMtalker
Joined
·
1,495 Posts
sounds like your safc isnt set up right.

Make sure your sensor type is set to 'karman'
cyl is set to '4' and your throttle (?) is set the up arrow (upper right).

That should get you back to normal.
 
1 - 5 of 5 Posts
Top