DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter #1
I have a chance to buy an entire motor from a 90 2.0 Eclipse for dirt cheap. I did some searching to make certain that the crankshaft is the same (heat treated and whatnot). I'm fairly sure they are the same, but was wondering if the NA crank is heat treated and will hold up well in my race motor. I'm somewhat flustered as I purchased 2 cranks recently from guys on the trader that assured me they were perfect. They were both far from perfect. In fact they were worse than my original.

Thanks,
Mark
 

·
Registered
Joined
·
532 Posts
I need to know if the cranks are the same to, any one know?
 

·
Registered
Joined
·
2,579 Posts
All 1g 4g63 cranks regardless of turbo or non turbo are the same. Well all the 6-bolts are the same, and all of the 7-bolts are the same.
 

·
Registered
Joined
·
532 Posts
Ya thats what i was thinking but just wanted to make sure before i build my motor, thanks kronus
 
1 - 5 of 5 Posts
Top