DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter #1
I got my ground control coilover kit and KYB AGX shocks for my '91 TSi AWD today. I looked at the Vfaq and noticed that their kit came with rubber "o" rings and sleeves. Mine did not. Their kit comes with an aluminum "top hat" for the top of the spring. Mine did not. Their maroon threaded sleeve rests on the part of the shock where the factory springs are designed to go. My threaded sleeve has a black ring around the inside that keeps it from going down that far. There is a good 4 inches between the bottom of the threaded sleeve and the base where the stock springs go.

Do I have the wrong kit here? It has the right part number, and says it is for the 90-94 Eclipse/Talon. What is the problem? Or am I imagining things?

thanks...
 
1 - 1 of 1 Posts
Top