DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

How to remove rusted seat.

2K views 2 replies 2 participants last post by  Mutzky 
Strangely I have had the same problem.The fix is to put a piece of plywood against the back seat verticle to the bottom.Next put a scizzors jack against the plywood side ways so that it will expand like an accordian between the back seat and the front seat base.Make sure the base of the jack is againt the front eat and the small head of the jack is against the back plywood.Pull up on the front seat adjustment leaver in the front of the Drivers or Passenger's seat whichever you are working on.Last of all,crank the scizzords jack to open and froce the front seat forward to push that seat until you can get to the floor bolts to remove the seat.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top