DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter · #1 ·
Well I just finished replacing the head gasket along with new valve seals. We also installed a Fmic and 650 injectors. So when we were preparing to pull the head we pulled the cas plug out of the housing, it seemed like it may have broke when we pulled it out. So we got the car all back together triple checked the timing and tried to start it. Now what happens is it will start get to 1000 rpm and it seems to be missing a bit, then it will rev by itself to 3 grand and die all together. Also if you try to keep it alive it will not respond to any throttle. It also runs the same when the CAS is out as it does when it's in, which is why we are suspecting it is bad. Does this sounds like a bad cam angle sensor? or is their something else we should check. Keep in mind it is a non adjustable cas I have a 98 awd.
 
1 - 1 of 1 Posts
Top