DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 20 of 42 Posts

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #1 · (Edited)
Alright, there's a local DSM'er selling a 1GA AWD 5-speed Talon that I want, and in order for me to buy it, I need to sell a few parts so I can pay for it. So, this is a mini part out. Everything but the engine/trans is for sale. Let me know what you want, and I'll give you a price shipped for it. :)


Turbo is an eBay 16G, but has 3,000 miles on it and has been great to me. Made consistent 8.3 passes in the 1/8th mile on stock head/cams/1G 02 housing/etc, and no tune. Injectors are Denso 660's that worked absolutely great on this 16G. At 21psi I was only getting 55% IDC's. :D Fuel pump is a walbro 255 high pressure. All parts have right at or less than 3,000 miles on them. The boost and watertemp(first and last on the pillar) are Glowshift gauges that are brand new, and the one in the middle is an AEM wideband with less than 3,000 miles on it, and I'll include the silver bezel ring and white afr faceplate with it.

Exhaust manifold is the old "GT Manifold" that was sold on DSMparts.com. This thing flows like an FP race manifold. It's runners are waaay bigger than even a fully ported Evo 3 manifold, and the collector is pretty damn big too.


I've also got a spare 2G head that's just been refreshed, new valves, valve job, resurfaced, etc, and a few other spare parts so if you need something just ask me. :)







Below is a small list of parts and prices I'd like to get. Prices don't include shipping unless stated otherwise.


2G head: $150

Current head on car: $300

Wideband: $130

Boost and Water temp gauges: $50 for both

3 pillar pod: $20

Cyclone IM: $115

Walbro 255: $40

Denso 660 injectors: $120 shipped

spare 1G head: $100

Complete VRSF 1G kit: $280 shipped

NGR Type S BOV: $110 shipped

GT Manifold: $75

eGay turbo: $120

3" downpipe: $80

3" CAI: $40
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #2 ·
Found a couple more things, and I'm adding some pictures of the 2G head. Also I've got a 2G IM with it if you want! :D


eGay 38mm wastegate. Comes as pictured. -$30



2G head




3.5" GM MAF with two good true 4-ply couplers, and two stainless steel(good kind!) t-bolt clamps! -$45 shipped

 

·
Registered
Joined
·
938 Posts
What size is your intake pipe, and how about that exhaust manifold heat shield?
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #4 ·
The intake pipe is 3" aluminum, and comes with a coupler that fits over all 14b/16g/20g compressor. :) The heatshield is custom from Shane on here. :D It's in great shape, and as you can see has the mitsu diamonds on it. $40 shipped for the heatshield, and $40 shipped for the intake. :) I can include a K&N filter recharger kit for it too for an extra $10 if you want it. :D It's for speed density, so there's no recirculation port, but you're going SD anyway. :D
 

·
Registered
Joined
·
938 Posts
Send me your paypal.
 

·
Premium Member
Joined
·
1,990 Posts
Super sexy heat shield! I knew that would go like hot cakes! :) GLWS.

Shane
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #9 ·
Hell yeah Shane, I loved it. When I get more money, I'll grab another one from you. :D


Downpipe is a megan racing 3" downpipe. Unfortunately it sold earlier today. :)


The only stuff that I have for sale still are as follows


- 2G Head
- spare 1G head
- NGR Type S BOV
- eBay 38mm external gate
- 3.5" GM MAF with couplers
- Dense 660cc Injectors
- Polished 1G fuel rail

Stuff is semi-negotiable on price, don't be afraid to throw me a price on something! :)
 

·
Premium Member
Joined
·
1,163 Posts
Damn! wish I would have seen this ealier, I would have picked up that heatsheild. But I might be interested in the 660 injectors. I'll let you know.
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #12 ·
Still have what I listed below. Hit me up with some offers if you don't like the pricing. Pricing below includes shipping and paypal fees.

- 2G Head - $150 shipped
- spare 1G head - $138 shipped
- NGR Type S BOV - $110 shipped
- eBay 38mm external gate - $30 shipped
- 3.5" GM MAF with couplers - $40 shipped
- Dense 660cc Injectors - $120 shipped
- Polished 1G fuel rail - $30 shipped

Let me know!
 

·
Premium Member
Joined
·
1,163 Posts
Hows that gasket on the cyclone IM?
 

·
Registered
Joined
·
1,833 Posts
Hmm may be interested in the external... Let me see.
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #16 ·
:) GM MAF sold to ryan95turbo.


Everything below is still available, with update prices.

- 2G Head - $150 shipped
- spare 1G head - $100 shipped
- NGR Type S BOV - $110 shipped
- eBay 38mm external gate - $25 shipped
- 2G MAF, perfect shape - $35 shipped
- Dense 660cc Injectors - $120 shipped
- Polished 1G fuel rail - $25 shipped
- 2G IM with good MDP sensor - make offer
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #18 ·
I have all four laser hubcaps, but I'm not willing to part with them, sadly. Haha. Unless you got some spare 1Ga GSX "blades", some 2G GST(don't need Chromies) or some 2G GSX rims. :p
 
1 - 20 of 42 Posts
Top