DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
21 - 40 of 42 Posts

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #21 ·
I will trade any/all of this stuff for a recirculated 02 housing for a 38mm wastegate!! Picture example below!!


 

·
Registered
Joined
·
1,833 Posts
Particular kind? Not egay I hope...
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #23 ·
I'm going to get it all rewelded anyway, so eGay versions will be accepted! :p
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #24 · (Edited)
Bam!! Still got the parts, bitches.



Also..I really...really don't want to, but I have a 20G I might..might be interested in selling for $400. It's an FP 20G, ported to the max and clipped, setup for external wastegate on the 02 housing. Keep an eye on this thread as I might or might not post it up for sale.
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #25 · (Edited)
Alright guys, it's a go. I'm selling my FP 20G. As I mentioned above, it's ported to the absolute max, and the turbine wheel is clipped. 45+lbs/min will be no problem with this turbo, and spool up time will be great!! I'll include a stock oil feed line with banjo bolt too, very little shaft-play. $400 shipped. This will only be for sale for the next few days, because after that, it wont make any difference if I have the money or not. HURRY UP AND GRAB IT BEFORE IT'S TOO LATE! Get it and make way more power than an E316G, with way more top end. ;)



You can see the FP stamp faintly at the top. :)




Green compressor housing included at no extra cost!! :p
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #28 ·
No, sorry. :(


Adding a mint condition 1GA Talon centerpiece $20 shipped to your door. :)



Other than that, I've got everything but the injectors.
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #30 ·
Okay, so, I know I bounce around a lot but this time the 20G is up for sale for good. I also stripped all that fugly green paint off the compressor housing.

$400 shipped to your door or will trade for a set of cams(anything but BC) and a tubular 02 housing or a meth injection kit.

Updated pics below!





Buy it, turn up the boost, make 400awhp, enjoy. :p
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #33 ·
1G head is mutha' fuckin' sold as well. :p


Still got most of this stuff people. GET TO BUYING!!
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #36 ·
Updated list

- 2G Head - $150 shipped
- NGR Type S BOV - $110 shipped
- eBay 38mm external gate - $25 shipped
- 2G MAF, perfect shape - $35 shipped
- Polished 1G fuel rail - $25 shipped
- 2G IM with good MDP sensor - $50 shipped
- 1GA Eagle Talon centerpiece - $35 shipped
- 1GA Mitsubishi centerpiece kind of yellow - $40 shipped


I am looking for a couple of things for a trade if you have them. A ported 02 housing(1G, 2G, etc doesn't matter as long as it's ported), good meth injection kit, set of 264 or 272 cams, etc.


picture of said mitsu centerpiece.(it's the one on top)
 

·
Registered
Joined
·
938 Posts
I would've bought that 20g if only you had put it up a week or two earlier... I guess I'll have to deal with my EVO 3. *sadface*
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #38 ·
Damn. If I would've known that I woulda held on to it.


If something happens and I end up getting it back, I'll let you know. :)
 

·
Registered
Joined
·
2,768 Posts
Discussion Starter · #39 ·
Just so you guys know, I can include a set of 1G cams with 1G cam gears installed with the 2G head if you like, for the cost of shipping(it'll be like $15 extra).
 

·
Registered
Joined
·
2 Posts
Alright, there's a local DSM'er selling a 1GA AWD 5-speed Talon that I want, and in order for me to buy it, I need to sell a few parts so I can pay for it. So, this is a mini part out. Everything but the engine/trans is for sale. Let me know what you want, and I'll give you a price shipped for it. :)


Turbo is an eBay 16G, but has 3,000 miles on it and has been great to me. Made consistent 8.3 passes in the 1/8th mile on stock head/cams/1G 02 housing/etc, and no tune. Injectors are Denso 660's that worked absolutely great on this 16G. At 21psi I was only getting 55% IDC's. :D Fuel pump is a walbro 255 high pressure. All parts have right at or less than 3,000 miles on them. The boost and watertemp(first and last on the pillar) are Glowshift gauges that are brand new, and the one in the middle is an AEM wideband with less than 3,000 miles on it, and I'll include the silver bezel ring and white afr faceplate with it.

Exhaust manifold is the old "GT Manifold" that was sold on DSMparts.com. This thing flows like an FP race manifold. It's runners are waaay bigger than even a fully ported Evo 3 manifold, and the collector is pretty damn big too.


I've also got a spare 2G head that's just been refreshed, new valves, valve job, resurfaced, etc, and a few other spare parts so if you need something just ask me. :)







Below is a small list of parts and prices I'd like to get. Prices don't include shipping unless stated otherwise.


2G head: $150

Current head on car: $300

Wideband: $130

Boost and Water temp gauges: $50 for both

3 pillar pod: $20

Cyclone IM: $115

Walbro 255: $40

Denso 660 injectors: $120 shipped

spare 1G head: $100

Complete VRSF 1G kit: $280 shipped

NGR Type S BOV: $110 shipped

GT Manifold: $75

eGay turbo: $120

3" downpipe: $80

3" CAI: $40
WTB 1G engine wire harness turbo
 
21 - 40 of 42 Posts
Top