DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

Status
Not open for further replies.
1 - 13 of 13 Posts

·
Registered
Joined
·
174 Posts
Discussion Starter #1
OR buy car and every thing i have for $14.500 firm (I have about 25k invested)

PRICED TO SELL, TELL EVERYONE PLEASE!!!

ONCE I HAVE "ABOUT" $8K worth ready to be sold then it is all for sale.

i will need items spoken for so i get enough $$$ before i sell it. SO DONT SAY I WANT IT AND YOU DONT!!

i might have a recipt if not listed

ALL PARTS ARE BRAND NEW UNUSED!

BW s362 extended tip turbo, t3 3" vband outlet,A/R .71, $1,300, (have recipt for $1,543 2 months ago)

TRE stage 3 transmisson fully built $2900 OBO A LITTLE(have recipt for $3500 3 months ago)still in crate!

D2 fully adjustable coilovers $800 (have recipt for i think $1100 3 months ago)

CARBON FIBER HOOD $450 (paid $675)

DRILLED & SLOTTED BRAKES F/R WITH EBC green brake pads & s.s. braided lines $225

S.S. intake manifold just like the jmfab race $300

APEXI N1 3" turbo back exhaust $250

TIAL 40mm waste/gate $125

ACCUFAB 75mm TB $100

WALLBRO 255 INTANK $75

WALLBRO 255 INLINE $75

1G DSM_LINK v2.5 (complete with all extras & adapter) $550

ACT 2600 pp and street disc $125

fidanza aluminum flywheel $125

AEM uego WIDEBAND $150

PRECISION 1200cc INJECTORS $250

FUEL_LAB fuel pressure regulator $130

SUMMIT billet Fuel filter $50

18"-7.5 KONIG RIMS ,,NEW NITTO TIRES $625

DEJON 4" INTAKE PIPE $75 (paid $111)

GREDDY type-RS BOV $75

4BOLT LSD cryo treated gears,case,axles,RESHIMMED,AXELS APEAR TO ME DSS 650HP (IF SO $375) $270

PORTED AND POLISHED HEAD with BC SPRINGS & RETAINERS,COMETEC MLS HEAD GASKET $550

BC 272 CAMS $300

FIDANZA ADJUSTABLE CAM GEARS $225 ?

6 BOLT SHORT BLOCK:EAGLE RODS,WEISCO PISTONS .20,,,,ALL CRYO TREATED,,ACL race BEARINGS,ARP MAIN STUDS,NEW WATER PUMP,NEW OIL PUMP,NEW GASKETS,front cover,BSE KIT,BORED .20,MILLED,DECKED,BALLANCED,MAGNA FLUXED BLOCK
$1450

MISIMOTO ALUMINUM RADIATOR WITH SLIM LINE FAN,GATES BLUE SILICONE (RADI) HOSES$175,

POWDER COATED VALVE COVER $80 (spent $85 just for powder coat)

DEJON FMIC PIPING 2.5" $75

FMIC FRONT MOUNT INTERCOOLER $100 (3" THICK)

T3 RAM HORN HEADER,MANIFOLD WITH 40MM W/G MOUNT $125

TRANSFER CASE RESHIMMED $125

DRIVE SHAFT $ 75

FRONT AXIL's 2 L/R $75

TURBO TIMMER FULL AUTO WITH plug in wireing harness $75


NEW DASH $75

AND ANY THING ELSE,BODY PARTS,INTERIOR PARTS,SUSPENSION PARTS ,ETC,ETC,ETC


there are tons and tons of other parts aftermarket,trans's,hood,ETC

EMAIL ME or pm ,

but prefer EMAIL
 

·
Registered
Joined
·
174 Posts
Discussion Starter #4 (Edited)
Will in a few ^^.

Also head has 1mm oversized S.S.,nitride coated,Swirl polished,3G revised lifters.rockers,ferra valve stem seals,new guides, HEAD is complete with MLS comitec gasket.$ 650 (sorry not 550)

Also have (COP) coil on plug kit $150ish

Here in about an hour (i think) parts will be for sale lol
 

·
Registered
Joined
·
174 Posts
Discussion Starter #6
I want to see pics of the 4 bolt rear and axels. Do you have receipts for the cryotreating and such? I am VERY interested.
Ill have to look around and see if i do.

Every thing is priced so low so i can come up with the money lol :(


ALSO as a reminder to ALL ,Prices do not include Shipping (if needed) or papal fees (if it is preferred)
 

·
Registered
Joined
·
174 Posts
Discussion Starter #12
Well it's made for a blow threw setup,,but it can be sucked threw...


BUT nothing is for sale anymore, SORRY.
 
1 - 13 of 13 Posts
Status
Not open for further replies.
Top