DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 5 of 5 Posts

·
Elite DSMtalker
Joined
·
1,281 Posts
Pull off the trim piece in the trunk, then it's (I think) 6 bolts that hold it in place (10mm if I'm not mistaken). Simple stuff :)
 

·
Registered
Joined
·
662 Posts
Be careful when you pull off the plastic panel in the trunk, make very sure that everything connection is disconnected. I made the mistake of pulling it out and I cracked it in half :(

The side tail lights need to come out too, at least on talons anyway.
 

·
Registered
Joined
·
1,072 Posts
imoore said:
Be careful when you pull off the plastic panel in the trunk, make very sure that everything connection is disconnected. I made the mistake of pulling it out and I cracked it in half :(

The side tail lights need to come out too, at least on talons anyway.
maybe in talons but in an eclipse you don't need to pull out the tails.
I did it myself when I had my GSX.
It's a great simple mod to do, I think 2G dsm's with the center piece painted looks great.

Also I believe this has been covered once in great depth, if you do a search you should find it. It gives a great guide on how to pull out the center piece and the screws etc..
 
1 - 5 of 5 Posts
Top