DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter #1
I'm going to replace all the stock lines with AN fittings/ braided line and need to know what adapter i need to convert to AN-6 fittings. I'm looking for the thread on the water inlet and oulet and also the oil feed line.

i believe the oil feed line is an m14x1.5? and the water lines are both m16x1.5.
 
1 - 1 of 1 Posts
Top