DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner

1 - 14 of 14 Posts

·
Premium Member
Joined
·
3,305 Posts
Discussion Starter #1 (Edited)
Follow this please:
1.Brand of Rim-
2.Rim size (diameter and width)-
3.Offset-
4.Brand of tire-
5.Tire size-
6.Suspension-
7.Do they rub-
8. What Brakes-
9. Camber?
10. Fender work? (Roll? Cut? Pull?)
 

·
Premium Member
Joined
·
3,305 Posts
Discussion Starter #2
1.Brand of Rim- GM C4 Sawblade
2.Rim size (diameter and width)- 17x9.5
3.Offset- +56 with 25mm adaptor effective 31mm
4.Brand of tire- NA
5.Tire size- NA
6.Suspension- Ksport coilovers
7.Do they rub- NA
8. What Brakes- stock 1g rear



Just a start. Lets get this thing going!
 

·
Registered
Joined
·
869 Posts
Is this for the herrafrush types only? If not, here goes my maxed out non rolled, non aggressive type setup:

1. Rays G-games 77wolf (discontinued)
2. 18x7.5"
3. +42
4. Sumitomo
5. P225-40-18
6. Eibach Prokit KONI Yellows
7. nope
8. stock

 

·
Premium Member
Joined
·
3,305 Posts
Discussion Starter #4
Not not only for aggressive. Any down the side shots?
 

·
Premium Member
Joined
·
718 Posts
1. Enkei RPF-1
2. 17x7.5
3. +45 with 22mm spacer ( effectively +23 offset)
4. Potenza Re-11
5. 215-45-17
6. BC type Br coilovers
7. No rubbing (over bumps yes but need to roll rears)
8. Evo Brembos







 

·
Registered
Joined
·
34 Posts
1.Brand of Rim- Advan RG-1
2.Rim size (diameter and width)- 18x.9.5
3.Offset- +35
4.Brand of tire- General Exclaim
5.Tire size- 255/35
6.Suspension- Tein SS Coilovers
7.Do they rub- Rears do (keep in mind I have an adjusting collar taken out on the rear coilovers, so I am pretty dang low in the rear. And I run a meaty tire
8. What Brakes- Evo brakes front and rear
9. Camber - Front is -1.8, rear is -2.8
10. Rolling? - Front and rear are rolled somewhat. Rear lip was just folded over itself, not cut. No pulling at all





I added number 9 and 10 because I think they are necessary for determining fitment. As Wade knows, the car is down for a bit for upgrades, so I will get fitment pictures once it is on the ground again
 

·
Registered
Joined
·
869 Posts

·
Elite DSMtalker
Joined
·
1,691 Posts
1.Brand of Rim- CCW Classics
2.Rim size (diameter and width)- 16 x 8
3.Offset +32
4.Brand of tire- Hoosier
5.Tire size- 26-9.5/16
6.Suspension- Ksport coilovers
7.Do they rub-With the height adjusted correctly they do not rub.
8. What Brakes- 2g front 1g rear
9. Camber -never checked
10. Rolling? - none

 

·
Registered
Joined
·
1,833 Posts
Dang it swade, I have to wait to be home to see your pics of the sawblades! Thats an idea Ive had for a while now.
 

·
Registered
Joined
·
965 Posts
1.Brand of Rim- Enkei EKM3
2.Rim size (diameter and width)- 18x8
3.Offset- +40
4.Brand of tire- Pirelli
5.Tire size- 235/40
6.Suspension- Tokico Blue shocks and Tokico HP springs (1.75" drop).
7.Do they rub- Rears rubbed the pinch weld during hard corners/bumps. Front inner sidewalls rub during hard corners, which I have yet to look into farther.
8. What Brakes- Early '95 stock brakes.
9. Camber? No exact specs yet. Currently using 3 washers behind the rear UCA's to help compensate for lowering.
10. Fender work? (Roll? Cut? Pull?) The rear pinch welds have been folded back, but no cutting or pulling.



 

·
Registered
Joined
·
1,833 Posts
Swade any side shots yet?

Dyesuperman: That car is mint!
 

·
Registered
Joined
·
48 Posts
Follow this please:
1.Brand of Rim- 5Zigen FN01R-C Hot Versiom
2.Rim size 17x8
3.Offset-+35
4.Brand of tire- Sumitomo HTR-Z
5.Tire size- 245/40ZR17
6.Suspension- Megan Racing Coilovers
7.Do they rub- No
8. What Brakes- Dual Piston "Big Brakes" standard rear
9. Camber? -3* front
10. Fender work? (Roll? Cut? Pull?) none





 
1 - 14 of 14 Posts
Top