Calling AGX/Pro-Kit DSMers

Redkin · May 9, 2001

I ahve just finished installing my AGXs and Pro-Kits. My complete setup is AGXs, Pro-Kits, Sus. Tech. Sway bars, and a strut bar. I haven't had the chance to adjust the settings yet, I just cranked them up to 4 in front and 8 in rear. The car is a little bouncy. I have a 1G FWD.

Also, there are three holes on the rear sway bar. I think these are for over/under steer. I ahve it on the middle. Any suggestions???

Thanks guys...

vpogv · May 10, 2001

off topic

Hey Redkin -
How much did the Prokits lower your car? I am about to get them that lower it 1.3 (standard?) and I was curious if you had any camber problems?

Redkin · May 10, 2001

The drop was about an inch. It's a noticable difference, but not deastic, that's what I was going for. I bought the camber kits from Eibach but so far I didn't need them. I'm going to take the car to the alignment shop this weekend to double check but nothing *looks* wrong. I used the same hardware that the old struts used.

Calling AGX/Pro-Kit DSMers

Redkin

vpogv

Redkin

Top Contributors this Month

Recommended Communities