DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
Cancel
Create thread New Garage Forums

FREE MOD!!!!!! EGR Blockoff

Jump to Latest
81 - 100 of 129 Posts
#81 ·
It keeps oil and unburnt waste from re-entering the combustion mix. Ergo, the air "reading" has more oxygen per cubic volume which will allow more injector fuel for a very little bigger but cleaner bang. You would be surprised how much goop builds up on the throttle plate. Bill Spruill, oldest Colt
 
#82 ·
Does anyone have any pics of this mod done? Also, I notice just about everyone who posted on this tread drives a 1st gen, I'm assuming it can be done on a 2nd gen. I broke the hose on my egr valve, if it can go without the vaccum hose, that would be great.
 
Save
Reply Quote Like Like
#83 ·
Nitsud said:
Does anyone have any pics of this mod done? Also, I notice just about everyone who posted on this tread drives a 1st gen, I'm assuming it can be done on a 2nd gen. I broke the hose on my egr valve, if it can go without the vaccum hose, that would be great.
Click to expand...
yes you can remove it on the 2g, all you have to do is make a plate its very very simple. also try checking this out it should answer all your questions, im suprised this thread hasnt answerd all of them for you to begin with... http://www.taboospeedshop.com/emissions1.htm
 
#84 ·
I'm assuming that my post was understood as a non-turbo and not turbo model? So the EGR is behind the manifold? I was way off. I thought it was the thing right in front of the valve cover near the intake piping. At least that's what I was told.
 
Save
Reply Quote Like Like
#87 ·
If you guys have emissions inspections but still want to block the egr off, use a pop/soda can to make a new gasket for the egr. Then just don't put the through holes in it. That way everything can be hooked up, it just won't do anything.
 
#90 ·
Could someone PLEASE post a pic of the install complete?
 
Save
Reply Quote Like Like
#91 ·
i have my egr valve sitting next to me on the computer desk... once I eat something and take a break, I am gonna cut up a pop can and block it off.


the pop can thing will be temporary till I get a better piece from FFWD



actually the egr valve almost looks like the stock 1st gen BOV but smaller
 
Save
Reply Quote Like Like
#92 ·
I just dont get it... that plate on page 2... I looked up the EGR on my chiltons manual... and I see no place to put that plate... theres 2 hoses coming in... and 1 comin out... or maybe 1 coming in and 2 going out.........

I see another thing right between the throttle body and the valve cover and I could see the block off plate going there.. but I dont think thats the EGR>>]

can someone please post a pic it would help me so greatly I have trobule following diagrams.. I need to see it to understand..

THANX A MILLION
 
Save
Reply Quote Like Like
#94 ·
are there any pics on the vfaq where this is located? Ive never looked for it before, from you guys talking sounds like it might be on the #4 side of the runners?


oops, tnx tab
 
Save
Reply Quote Like Like
#96 ·
I just cut up a soda can. Use three layers so it doesn't burn thourgh.
 
Save
Reply Quote Like Like
81 - 100 of 129 Posts
About this Discussion
128 Replies
57 Participants
Last post:
RippinGSX
DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum
posts
2.3M
members
104K
Since
2000
A forum community dedicated to Mitsubishi Eclipse, Plymouth Laser and Eagle Talon owners and enthusiasts. Come join the discussion about performance, turbos, builds, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General DSM Tech and Tuning Help! Tech Newbie Questions Forum Body Tech and Appearance Electronics Tech