Exhaust Pictures

sticksR4chics97 · Oct 7, 2005

Muffler for right now. Full exhaust coming this winter

14bPowered · Oct 8, 2005

Greddy/Trust catback
I can literally fit my entire fist inside the tip. Sounds good though

4cdair · Oct 14, 2005

that rnr didnt look bad

CROTSi · Oct 19, 2005

Buddy Club Racing Spec III

talon_4g63 · Oct 19, 2005

nice exaust pics. i will post my 2.5 burschur racing exhaust soon..

polojoeme1 · Oct 20, 2005

exhaust pic

its a dirty dark pic but it is my greddy evo2 cat back

4SFED4 · Nov 19, 2005

My home fabbed POS 2.5" on my daily

The custom 3" on my Dad's GSX w/ a Borla XR1

The 3.5" on my 91 Talon

caddylac · Nov 20, 2005

is it possible to run the exhaust under rear instead of over on a fwd like i've seen on awd? sorry 91 talon tsi

4g63 gst · Nov 20, 2005

you could but you would probably scrap it alot. as long as the car wasnt low it wouldnt be a problem. when you lower it though you will run into serious problems

caddylac · Nov 20, 2005

its got 1.5" lowering springs on it, so it would probably be damn close

gvr4dsmer · Nov 20, 2005

caddylac said:
is it possible to run the exhaust under rear instead of over on a fwd like i've seen on awd? sorry 91 talon tsi

I have recent experience with this issue. About a month ago I put a 2.5" mandrel homade exhaust on my 90' FWD Talon. I decided to go under the rear "axel". The first attempt I had the car up with jackstands on the body, and let the suspension free hang. I then built the exhaust underneath, this did not work. I ended up with about a half inch of clearance

, so back up it went. This time I used my jackstands and weight of the car to put full load on the suspension, then cut apart the new exhaust and tried again. This time I held it about a half inch under the
"axel" and I clears fine, I have yet to try to pick the car up with a lift

I'm not sure how that's going to work, I'm pretty sure I can just pop off my rubber mounts and let it hang a bit. What can I say, it flows 1000 times better than stock and with my ebay muffler about $50 (already had bends).

caddylac · Nov 20, 2005

i see...so loading the suspension and gettin pretty damn close with it seemed to give you enough ground clearance?

bluebeast · Dec 21, 2005

3inch thermal R&D straight threw on a FWD....

lauj2gdsm · Dec 24, 2005

here is my 3" pipes. and also under rear. on a 95 gst. its low. but i hardly scrape.

Piranha451 · Dec 24, 2005

Here's my Thermal RD...

click on it to make the image larger.

european · Dec 24, 2005

niiiiiiiice!

i gotta put a full exhaust on my car soon!

FoRk · Dec 29, 2005

my apexi n1, yes i need rims i know!!! haha there comming soon.

dsmjo · Dec 29, 2005

YOUR CARS FUCKN SEXY !!!! DAMM

I want the blitz back bumper but what kind is that?
I have the 2G bomex on the front of my car

jjmoskoe · Dec 29, 2005

Does the n-1 angle the muffler a little to the left?

DR.Spock · Dec 29, 2005

jjmoskoe said:
Does the n-1 angle the muffler a little to the left?

yes, alll of the n-1's i seen have an angle

Exhaust Pictures

sticksR4chics97

14bPowered

4cdair

CROTSi

talon_4g63

polojoeme1

4SFED4

caddylac

4g63 gst

caddylac

gvr4dsmer

caddylac

bluebeast

lauj2gdsm

Attachments

Piranha451

european

FoRk

dsmjo

jjmoskoe

DR.Spock

Top Contributors this Month

Recommended Communities