I put the 4 piece prothane motor mount set in my 95 gst, but it was a total b*tch to do it. I'd regret ever having to take those things back out. Does anyone know of a process that would make those things hella easier to take them in and out at least with your hand(s) like you could with stock mounts?
Anyone found an easy way to remove prothanes like stock?
elementalwindx
1 - 9 of 9 Posts
Joined
·
187 Posts
I put the 4 piece prothane motor mount set in my 95 gst, but it was a total b*tch to do it. I'd regret ever having to take those things back out. Does anyone know of a process that would make those things hella easier to take them in and out at least with your hand(s) like you could with stock mounts?
Joined
·
3,937 Posts
are you saying you want to remove the insert? or remove the mount from the car, once you install them in the mount you should be able to remove the whole mount easy as pie, install will always be a pain though
Joined
·
187 Posts
remove the mount from the car, as in if you need to remove the transmission or head, you'd have to take off the mount to do so.1QuickChic said:
Joined
·
645 Posts
i got the prothanes in piece of cake. wut did you use just your hands? because i used a rubber mallet to bump mine in position. i can bump them out just the same.
Joined
·
154 Posts
I dropped my prothanes in the deepfreeze for a couple of hours.lost spyder said:
They slid right in. No need for hammers or 2x4s.
Joined
·
25,879 Posts
The motor mounts shouldn't be that hard to remove and reinstall. Are you just having a hard time lining up the bolt holes or what? I have swapped all four in under an hour without hussling.
Joined
·
154 Posts
I know, I just felt like sharing.RippinGSX said:You can't do that when your pulling them out.
1 - 9 of 9 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
