Well after making a few changes with the car we headed back out to the track to have at it again. This time I had the MSD DIS2 hooked up and was using the MSD 2step. MUCH BETTER! Car came out of the hole alot better, BUT! The track prep was nothing but crap, car spun through 1st, 2nd and bits of 3rd, you will hear the RPM's in 3rd gear in the video. 1st pass of the day it went 9.61 @153mph with a 1.611 60ft, Car just would not hook up at all and still managed this on my 2nd pass, then the rain started to come down..
this was on 41lbs and 100shot for spool.
60ft. 1.524
330ft. 4.183
1/8th. 6.321
MPH 120.65
1000. 8.086
1/4 9.573
MPH 152.33
I need to get a hydraulic hand break for the car so when pre loading the clutch it won't roll through the beams. E-brake is just not holding it anymore as you will see on the 1st pass, 2nd pass I was able to keep the car from creeping on me while preloading the clutch.
No editing to the video, too lazy at this point LOL.
please right click and save as.
http://www.llarian.net/~gomer/mid%209's.mpg
this was on 41lbs and 100shot for spool.
60ft. 1.524
330ft. 4.183
1/8th. 6.321
MPH 120.65
1000. 8.086
1/4 9.573
MPH 152.33
I need to get a hydraulic hand break for the car so when pre loading the clutch it won't roll through the beams. E-brake is just not holding it anymore as you will see on the 1st pass, 2nd pass I was able to keep the car from creeping on me while preloading the clutch.
No editing to the video, too lazy at this point LOL.
please right click and save as.
http://www.llarian.net/~gomer/mid%209's.mpg
